In most cases it shouldn't be necessary to configure anything before building.
If you do want to make configuration changes, it is recommended that
you start by going to the
xc/config/cf directory, and copying
host.def. Then read through
host.def file (which is heavily commented), and set your
configuration parameters. Usually you can find
the default settings by checking the
.cf file(s) relevant to your OS.
A good rule to follow is only to change things that you understand
as it's easy to create build problems by changing the default configuration.
Check the configuration parameters specified in the
If you are using just the
X11R6.8.2-src3.tar.gz parts of the source dist, you
will need to define BuildFonts to NO.