- Both GCC, and the Sun Studio compilers are supported by X11R6.8.2.
The minimum recommended GCC release is 2.7.2.
Some earlier GCC's are known to not work and should be avoided.
You should also make certain your version of GCC predefines `sun'.
If needed edit
/usr/local/lib/gcc-lib/*/*/specs, and modify the
On SPARCs, regardless of the compiler you use, ensure it generates 32-bit
At this time, 64-bit binaries will probably not work.
- Also on SPARCs, you may be able to build the old deprecated Xsun* servers for
older cg* graphics devices by adding "#define XsunServer YES" or "#define
Xsun24Server YES" or "#define XsunMonoServer YES" to xc/config/cf/host.def.
These servers are no longer maintained nor supported and may not build in
- A Threaded Xlib compiled with GCC has subtle problems.
It'll work 98% of the time, however clients will occasionally exhibit
Most notably image viewers such as xv-3.10 exhibit this problem.
It is recommended that you set ThreadedX in
NO, if you are using GCC.
Sun's compilers do not have this problem.
Whether this behaviour still exists with newer GCC's has not been verified.
- To build X11R6.8.2 with GCC you need gcc and (optionally) c++filt from GNU
Don't install gas or ld from GNU binutils, use the one provided by Sun.
You might need to setup a /opt/SUNWspro/bin directory containing symbolic links
c++filt pointing respectively to the actual
- If you are using Sun compilers to compile the X11R6.8.2 distribution, you need to
modify your PATH appropriately so the Sun compiler tools are available.
Normally, they should be in
- You MUST put
/usr/ccs/bin at the front of your PATH.
There are known problems with some GNU replacements for the utilities found
/usr/ccs/bin versions of these programs must be found before
any possible GNU versions.
(Most notably GNU '
ar' does not work during the build).