xc/config/cf/host.defbefore compiling. To compile the sources, invoke ``
make World'' in the xc directory.
Note that OpenBSD project now has its own source tree, with some local modifications. You may want to start with this tree to rebuild from sources. The OpenBSD XF4 source tree is available by anoncvs from all OpenBSD anoncvs servers. See http://www.openbsd.org/anoncvs.html for details on anoncvs.
X11R6.9 compiles on most OpenBSD architectures. The X.Org X server builds and run on the following systems. On other architectures supported by OpenBSD, only client side libraries and applications are supported.
The X server is known to work on some VGA cards in alpha machines that support BWX I/O, with OpenBSD 3.2 and higher.
The following cards have been successfully tested for now:
Note that this version of doesn't work on TGA cards. The version shipped with OpenBSD 3.1 and higher includes an OS-specific driver wsfb that is used to support TGA cards.
The X server is currently known to work on most of the G4 Macs and iBooks with ATI or nVidia cards. Other machines are more or less untested.
Use xorgconfig to build a /etc/X11/xorg.conf file before starting the server for the first time.
For the Titanium Powerbook G4, you can try the following mode line in
/etc/X11/xorg.conf to match the flat panel resolution:
Modeline "1152x768" 64.995 1152 1213 1349 1472 768 771 777 806 -HSync -VSync
OpenBSD 3.2 on sparc switched to the wscons device driver and now uses the OS specific wsfb driver in the X server. This driver is not included in X11R6.9. Please use the version shipped with OpenBSD instead.
This version only has support PCI based machines using ATI cards on OpenBSD/sparc64. Note that the version shipped with OpenBSD has support for the X server on both SBus and UPA (unaccelerated) based cards.