Athena Widget Set - C Language Interface

X Consortium Standard

Chris D. Peterson

formerly MIT X Consortium

X Version 11, Release 7.7

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of the X Consortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium.

X Window System is a trademark of The OpenGroup.

Copyright © 1985, 1986, 1987, 1988, 1989, 1991 Digital Equipment Corporation, Maynard, Massachusetts.

Permission to use, copy, modify and distribute this documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Digital not be used in in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Digital makes no representations about the suitability of the software described herein for any purpose. It is provided “as is” without express or implied warranty.


Table of Contents

1. Athena Widgets and The Intrinsics
Introduction to the X Toolkit
Terminology
Underlying Model
Conventions Used in this Manual
Format of the Widget Reference Chapters
Input Focus
2. Using Widgets
Using Widgets
Setting the Locale
Initializing the Toolkit
Creating a Widget
Common Resources
Resource Conversions
Realizing a Widget
Processing Events
Standard Widget Manipulation Functions
Using the Client Callback Interface
Programming Considerations
Example Programs
3. Simple Widgets
Command Widget
Resources
Command Actions
Grip Widget
Resources
Grip Actions
Label Widget
Resources
List Widget
Resources
List Actions
List Callbacks
Changing the List
Highlighting an Item
Unhighlighting an Item
Retrieving the Currently Selected Item
Restrictions
Panner Widget
Resources
Panner Actions
Panner Callbacks
Repeater Widget
Resources
Repeater Actions
Scrollbar Widget
Resources
Scrollbar Actions
Scrollbar Callbacks
Convenience Routines
Setting Float Resources
Simple Widget
Resources
StripChart Widget
Resources
Getting the StripChart Value
Toggle Widget
Resources
Toggle Actions
Toggle Actions
Radio Groups
Convenience Routines
4. Menus
Using the Menus
Sme Object
Resources
Subclassing the Sme Object
SmeBSB Object
Resources
SmeLine Object
Resources
5. Text Widgets
Text Widget for Users
Default Key Bindings
Search and Replace
File Insertion
Text Selections for Users
Text Widget Actions
Cursor Movement Actions\fP
Delete Actions
Selection Actions
The New Line Actions
Kill and Actions
Miscellaneous Actions
Text Selections for Application Programmers
Default Translation Bindings
Text Functions
Selecting Text
Unhighlighting Text
Getting Current Text Selection
Replacing Text
Searching for Text
Redisplaying Text
Resources Convenience Routines
Customizing the Text Widget
Text Widget
Resources
TextSink Object
Resources
Subclassing the TextSink
TextSrc Object
Resources
Subclassing the TextSrc
Ascii Sink Object and Multi Sink Object
Resources
Ascii Source Object and Multi Source Object
Resources
Convenience Routines
Ascii Text Widget
Resources
6. Composite and Constraint Widgets
Box Widget
Resources
Layout Semantics
Dialog Widget
Resources
Constraint Resources
Layout Semantics
Automatically Created Children.
Convenience Routines
Form Widget
Resources
Constraint Resources
Layout Semantics
Convenience Routines
Paned Widget
Using the Paned Widget
Resources
Constraint Resources
Layout Semantics
Grip Translations
Convenience Routines
Porthole Widget
Resources
Layout Semantics
Porthole Callbacks
Tree Widget
Resources
Constraint Resources
Layout Semantics
Convenience Routines
Viewport Widget
Resources
Layout Semantics
7. Creating New Widgets (Subclassing)
Public Header File
Private Header File
Widget Source File
8. Acknowledgments

Chapter 1. Athena Widgets and The Intrinsics

The X Toolkit is made up of two distinct pieces, the Xt Intrinsics and a widget set. The Athena widget set is a sample implementation of a widget set built upon the Intrinsics. In the X Toolkit, a widget is the combination of an X window or subwindow and its associated input and output semantics.

Because the Intrinsics provide the same basic functionality to all widget sets it may be possible to use widgets from the Athena widget set with other widget sets based upon the Intrinsics. Since widget sets may also implement private protocols, all functionality may not be available when mixing and matching widget sets. For information about the Intrinsics, see the X Toolkit Intrinsics - C Language Interface.

The Athena widget set is a library package layered on top of the Intrinsics and Xlib that provides a set of user interface tools sufficient to build a wide variety of applications. This layer extends the basic abstractions provided by X and provides the next layer of functionality primarily by supplying a cohesive set of sample widgets. Although the Intrinsics are a Consortium standard, there is no standard widget set.

To the extent possible, the Intrinsics are "policy-free". The application environment and widget set, not the Intrinsics, define, implement, and enforce:

  • Policy

  • Consistency

  • Style

Each individual widget implementation defines its own policy. The X Toolkit design allows for, but does not necessarily encourage, the free mixing of radically differing widget implementations.

Introduction to the X Toolkit

The X Toolkit provides tools that simplify the design of application user interfaces in the X Window System programming environment. It assists application programmers by providing a set of common underlying user-interface functions. It also lets widget programmers modify existing widgets, by subclassing, or add new widgets. By using the X Toolkit in their applications, programmers can present a similar user interface across applications to all workstation users.

The X Toolkit consists of:

  • A set of Intrinsics functions for building widgets

  • An architectural model for constructing widgets

  • A widget set for application programming

While the majority of the Intrinsics functions are intended for the widget programmer, a subset of the Intrinsics functions are to be used by application programmers (see X Toolkit Intrinsics - C Language Interface). The architectural model lets the widget programmer design new widgets by using the Intrinsics and by combining other widgets. The application interface layers built on top of the X Toolkit include a coordinated set of widgets and composition policies. Some of these widgets and policies are specific to a single application domain, and others are common to a variety of applications.

The remainder of this chapter discusses the X Toolkit and Athena widget set:

  • Terminology

  • Model

  • Conventions used in this manual

  • Format of the Widget Reference Chapters

Terminology

In addition to the terms already defined for X programming (see Xlib - C Language Interface), the following terms are specific to the Intrinsics and Athena widget set and used throughout this document.

Application programmer

  • A programmer who uses the X Toolkit to produce an application user interface.

Child

  • A widget that is contained within another "parent" widget.

Class

  • The general group to which a specific object belongs.

Client

  • A function that uses a widget in an application or for composing other widgets.

FullName

  • The name of a widget instance appended to the full name of its parent.

Instance

  • A specific widget object as opposed to a general widget class.

Method

  • A function or procedure implemented by a widget class.

Name

  • The name that is specific to an instance of a widget for a given client. This name is specified at creation time and cannot be modified.

Object

  • A data abstraction consisting of private data and private and public functions that operate on the private data. Users of the abstraction can interact with the object only through calls to the object's public functions. In the X Toolkit, some of the object's public functions are called directly by the application, while others are called indirectly when the application calls the common Intrinsics functions. In general, if a function is common to all widgets, an application uses a single Intrinsics function to invoke the function for all types of widgets. If a function is unique to a single widget type, the widget exports the function.

Parent

  • A widget that contains at least one other ("child") widget. A parent widget is also known as a composite widget.

Resource

  • A named piece of data in a widget that can be set by a client, by an application, or by user defaults.

Superclass

  • A larger class of which a specific class is a member. All members of a class are also members of the superclass.

User

  • A person interacting with a workstation.

Widget

  • An object providing a user-interface abstraction (for example, a Scrollbar widget).

Widget class

  • The general group to which a specific widget belongs, otherwise known as the type of the widget.

Widget programmer

  • A programmer who adds new widgets to the X Toolkit.

Underlying Model

The underlying architectural model is based on the following premises:

  • Every user-interface widget is associated with an X window. The X window ID for a widget is readily available from the widget. Standard Xlib calls can be used by widgets for many of their input and output operations.

  • The data for every widget is private to the widget and its subclasses. That is, the data is neither directly accessible nor visible outside of the module implementing the widget. All program interaction with the widget is performed by a set of operations (methods) that are defined for the widget.

  • Widget semantics are clearly separated from widget layout geometry. Widgets are concerned with implementing specific user-interface semantics. They have little control over issues such as their size or placement relative to other widget peers. Mechanisms are provided for associating geometric managers with widgets and for widgets to make suggestions about their own geometry.

Conventions Used in this Manual

  • All resources available to the widgets are listed with each widget. Many of these are available to more than one widget class due to the object oriented nature of the Intrinsics. The new resources for each widget are listed in bold text, and the inherited resources are listed in plain text.

  • Global symbols are printed in bold and can be function names, symbols defined in include files, or structure names. Arguments are printed in italics.

  • Each function is introduced by a general discussion that distinguishes it from other functions. The function declaration itself follows, and each argument is specifically explained. General discussion of the function, if any is required, follows the arguments. Where applicable, the last paragraph of the explanation lists the return values of the function.

  • To eliminate any ambiguity between those arguments that you pass and those that a function returns to you, the explanations for all arguments that you pass start with the word specifies or, in the case of multiple arguments, the word specify. The explanations for all arguments that are returned to you start with the word returns or, in the case of multiple arguments, the word return. The explanations for all arguments that you can pass and are returned start with the words specifies and returns.

  • Any pointer to a structure that is used to return a value is designated as such by the _return suffix as part of its name. All other pointers passed to these functions are used for reading only. A few arguments use pointers to structures that are used for both input and output and are indicated by using the _in_out suffix.

Format of the Widget Reference Chapters

The majority of this document is a reference guide for the Athena widget set. Chapters three through six give the programmer all information necessary to use the widgets. The layout of the chapters follows a specific pattern to allow the programmer to easily find the desired information.

The first few pages of every chapter give an overview of the widgets in that section. Widgets are grouped into chapters by functionality.

"Chapter

Simple Widgets

"Chapter

Menus

"Chapter

Text Widgets

"Chapter

Composite and Constraint Widget

Following the introduction will be a description of each widget in that chapter. When no functional grouping is obvious the widgets are listed in alphabetical order, such as in chapters three and six.

The first section of each widget's description is a table that contains general information about this widget class. Here is the table for the Box widget, and an explanation of all the entries.




Application Header file	<X11/Xaw/Box.h>
Class Header file	<X11/Xaw/BoxP.h>
Class		boxWidgetClass
Class Name	Box
Superclass	Composite

Application Header File

This file must be included when an application uses this widget. It usually contains the class definition, and some resource macros. This is often called the “public” header file.

Class Header File

This file will only be used by widget programmers. It will need to be included by any widget that subclasses this widget. This is often called the “private” header file.

Class

This is the widget class of this widget. This global symbol is passed to XtCreateWidget so that the Intrinsics will know which type of widget to create.

Class Name

This is the resource name of this class. This name can be used in a resource file to match any widget of this class.

Superclass

This is the superclass that this widget class is descended from. If you understand how the superclass works it will allow you to more quickly understand what this widget does, since much of its functionality may be inherited from its superclass.

After this table follows a general description of the default behavior of this widget, as seen by the user. In many cases this functionality may be overridden by the application programmer, or by the user.

The next section is a table showing the name, class, type and default value of each resource that is available to this widget. There is also a column containing notes describing special restrictions placed upon individual resources.

A

This resource may be automatically adjusted when another resource is changed.

C

This resource is only settable at widget creation time, and may not be modified with XtSetValues.

D

Do not modify this resource. While setting this resource will work, it can cause unexpected behavior. When this symbol appears there is another, preferred, interface provided by the X Toolkit.

R

This resource is READ-ONLY, and may not be modified.

After the resource table is a detailed description of every resource available to that widget. Many of these are redundant, but printing them with each widget saves page flipping. The names of the resources that are inherited are printed in plain text, while the names of the resources that are new to this class are printed in bold. If you have already read the description of the superclass you need only pay attention to the resources printed in bold.

For each composite widget there is a section on layout semantics that follows the resource description. This section will describe the effect of constraint resources on the layout of the children, as well as a general description of where it prefers to place its children.

Descriptions of default translations and action routines come next, for widgets to which they apply. The last item in each widget's documentation is the description of all convenience routines provided by the widget.

Input Focus

The Intrinsics define a resource on all Shell widgets that interact with the window manager called input. This resource requests the assistance of window manager in acquiring the input focus. The resource defaults to False in the Intrinsics, but is redefined to default to True when an application is using the Athena widget set. An application programmer may override this default and set the resource back to False if the application does not need the window manager to give it the input focus. See the X Toolkit Intrinsics - C Language Interface for details on the input resource.

Chapter 2. Using Widgets

Using Widgets

Widgets serve as the primary tools for building a user interface or application environment. The Athena widget set consists of primitive widgets that contain no children (for example, a command button) and composite widgets which may contain one or more widget children (for example, a Box widget).

The remaining chapters explain the widgets that are provided by the Athena widget set. These user-interface components serve as an interface for application programmers who do not want to implement their own widgets. In addition, they serve as a starting point for those widget programmers who, using the Intrinsics mechanisms, want to implement alternative application programming interfaces.

This chapter is a brief introduction to widget programming. The examples provided use the Athena widgets, though most of the concepts will apply to all widget sets. Although there are several programming interfaces to the X Toolkit, only one is described here. A full description of the programming interface is provided in the document X Toolkit Intrinsics - C Language Interface.

Setting the Locale

If it is desirable that the application take advantage of internationalization (i18n), you must establish locale with XtSetLanguageProc before XtDisplayInitialize or XtAppInitialize is called. For full details, please refer to the document X Toolkit Intrinsics - C Language Interface, section 2.2. However, the following simplest-case call is sufficient in many or most applications.



	XtSetLanguageProc(NULL, NULL, NULL);

Most notably, this will affect the Standard C locale, determine which resource files will be loaded, and what fonts will be required of FontSet specifications. In many cases, the addition of this line is the only source change required to internationalize Xaw programs, and will not disturb the function of programs in the default "C" locale.

Initializing the Toolkit

You must call a toolkit initialization function before invoking any other toolkit routines (besides locale setting, above). XtAppInitialize opens the X server connection, parses the command line, and creates an initial widget that will serve as the root of a tree of widgets created by this application.

Widget XtAppInitialize(XtAppContext app_context_return, String application_class, XrmOptionDescRec options, Cardinal num_options, int *argc_in_out, String *argv_in_out, String *fallback_resources, ArgList args, Cardinal num_args);

app_con_return

Returns the application context of this application, if non-NULL.

application_class

Specifies the class name of this application, which is usually the generic name for all instances of this application. A useful convention is to form the class name by capitalizing the first letter of the application name. For example, the application named “xman” has a class name of “Xman”.

options

Specifies how to parse the command line for any application-specific resources. The options argument is passed as a parameter to XrmParseCommand. For further information, see Xlib - C Language Interface.

num_options

Specifies the number of entries in the options list.

argc_in_out

Specifies a pointer to the number of command line parameters.

argv_in_out

Specifies the command line parameters.

fallback_resources

Specifies resource values to be used if the site-wide application class defaults file cannot be opened, or NULL.

args

Specifies the argument list to use when creating the Application shell.

num_args

Specifies the number of arguments in args.

This function will remove the command line arguments that the toolkit reads from argc_in_out, and argv_in_out. It will then attempt to open the display. If the display cannot be opened, an error message is issued and XtAppInitialize terminates the application. Once the display is opened, all resources are read from the locations specified by the Intrinsics. This function returns an ApplicationShell widget to be used as the root of the application's widget tree.

Creating a Widget

Creating a widget is a three-step process. First, the widget instance is allocated, and various instance-specific attributes are set by using XtCreateWidget. Second, the widget's parent is informed of the new child by using XtManageChild. Finally, X windows are created for the parent and all its children by using XtRealizeWidget and specifying the top-most widget. The first two steps can be combined by using XtCreateManagedWidget. In addition, XtRealizeWidget is automatically called when the child becomes managed if the parent is already realized.

To allocate, initialize, and manage a widget, use XtCreateManagedWidget .

Widget XtCreateManagedWidget(String name, WidgetClass widget_class, Widget parent, ArgList args, Cardinal num_args);

name

Specifies the instance name for the created widget that is used for retrieving widget resources.

widget_class

Specifies the widget class pointer for the created widget.

parent

Specifies the parent widget ID.

args

Specifies the argument list. The argument list is a variable-length list composed of name and value pairs that contain information pertaining to the specific widget instance being created. For further information, see Section 2.7.2.

num_args

Specifies the number of arguments in the argument list. If the num_args is zero, the argument list is never referenced.

When a widget instance is successfully created, the widget identifier is returned to the application. If an error is encountered, the XtError routine is invoked to inform the user of the error.

For further information, see X Toolkit Intrinsics - C Language Interface.

Common Resources

Although a widget can have unique arguments that it understands, all widgets have common arguments that provide some regularity of operation. The common arguments allow arbitrary widgets to be managed by higher-level components without regard for the individual widget type. Widgets will ignore any argument that they do not understand.

The following resources are retrieved from the argument list or from the resource database by all of the Athena widgets:

NameClassTypeDefault Value
acceleratorsAcceleratorsAcceleratorTableNULL
ancestorSensitiveAncestorSensitiveBooleanTrue
backgroundBackgroundPixelXtDefaultBackground
backgroundPixmapPixmapPixmapXtUnspecifiedPixmap
borderColorBorderColorPixelXtDefaultForeground
borderPixmapPixmapPixmapXtUnspecifiedPixmap
borderWidthBorderWidthDimension1
colormapColormapColormapParent's Colormap
depthDepthintParent's Depth
destroyCallbackCallbackXtCallbackListNULL
heightHeightDimensionwidget dependent
mappedWhenManagedMappedWhenManagedBooleanTrue
screenScreenScreenParent's Screen
sensitiveSensitiveBooleanTrue
translationsTranslationsTranslationTablewidget dependent
widthWidthDimensionwidget dependent
xPositionPosition0
yPositionPosition0

The following additional resources are retrieved from the argument list or from the resource database by many of the Athena widgets:

NameClassTypeDefault Value
callbackCallbackXtCallbackListNULL
cursorCursorCursorwidget dependent
foregroundForegroundPixelXtDefaultForeground
insensitiveBorderInsensitivePixmapGreyPixmap

Resource Conversions

Most resources in the Athena widget set have a converter registered that will translate the string in a resource file to the correct internal representation. While some are obvious (string to integer, for example), others need specific mention of the allowable values. Three general converters are described here:

  • Cursor

  • Pixel

  • Bitmap

Many widgets have defined special converters that apply only to that widget. When these occur, the documentation section for that widget will describe the converter.

Cursor Conversion

The value for the cursorName resource is specified in the resource database as a string, and is of the following forms:

  • A standard X cursor name from < X11/cursorfont.h >. The names in cursorfont.h each describe a specific cursor. The resource names for these cursors are exactly like the names in this file except the XC_ is not used. The cursor definition XC_gumby has a resource name of gumby.

  • Glyphs, as in FONT font-name glyph-index [[ font-name ] glyph-index ]. The first font and glyph specify the cursor source pixmap. The second font and glyph specify the cursor mask pixmap. The mask font defaults to the source font, and the mask glyph index defaults to the source glyph index.

  • A relative or absolute file name. If a relative or absolute file name is specified, that file is used to create the source pixmap. Then the string "Mask" is appended to locate the cursor mask pixmap. If the "Mask" file does not exist, the suffix "msk" is tried. If "msk" fails, no cursor mask will be used. If the filename does not start with '/' or './' the the bitmap file path is used (see section 2.4.3).

Pixel Conversion

The string-to-pixel converter takes any name that is acceptable to XParseColor (see Xlib - C Language Interface). In addition this routine understands the special toolkit symbols `XtDefaultForeground' and `XtDefaultBackground', described in X Toolkit Intrinsics - C Language Interface. In short the acceptable pixel names are:

  • Any color name for the rgb.txt file (typically in the directory /usr/lib/X11 on POSIX systems).

  • A numeric specification of the form #<red><green><blue> where these numeric values are hexadecimal digits (both upper and lower case).

  • The special strings `XtDefaultForeground' and `XtDefaultBackground'

Bitmap Conversion

The string-to-bitmap converter attempts to locate a file containing bitmap data whose name is specified by the input string. If the file name is relative (i.e. does not begin with / or ./), the directories to be searched are specified in the bitmapFilePath resource--class BitmapFilePath. This resource specifies a colon (:) separated list of directories that will be searched for the named bitmap or cursor glyph (see section 2.4.1). The bitmapFilePath resource is global to the application, and may not be specified differently for each widget that wishes to convert a cursor to bitmap. In addition to the directories specified in the bitmapFilePath resource a default directory is searched. When using POSIX the default directory is /usr/include/X11/bitmaps .

Realizing a Widget

The XtRealizeWidget function performs two tasks:

  • Calculates the geometry constraints of all managed descendants of this widget. The actual calculation is put off until realize time for performance reasons.

  • Creates an X window for the widget and, if it is a composite widget, realizes each of its managed children.

    void XtRealizeWidget(Widget w);

  • Specifies the widget.

For further information about this function, see the X Toolkit Intrinsics - C Language Interface.

Processing Events

Now that the application has created, managed and realized its widgets, it is ready to process the events that will be delivered by the X Server to this client. A function call that will process the events is XtAppMainLoop.

void XtAppMainLoop(XtAppContext app_context);

app_context

Specifies the application context of this application. The value is normally returned by XtAppInitialize.

This function never returns: it is an infinite loop that processes the X events. User input can be handled through callback procedures and application defined action routines. More details are provided in X Toolkit Intrinsics - C Language Interface.

Standard Widget Manipulation Functions

After a widget has been created, a client can interact with that widget by calling one of the standard widget manipulation routines provided by the Intrinsics, or a widget class-specific manipulation routine.

The Intrinsics provide generic routines to give the application programmer access to a set of standard widget functions. The common widget routines let an application or composite widget perform the following operations on widgets without requiring explicit knowledge of the widget type.

  • Control the mapping of widget windows

  • Destroy a widget instance

  • Obtain an argument value

  • Set an argument value

Mapping Widgets

By default, widget windows are mapped (made viewable) automatically by XtRealizeWidget. This behavior can be disabled by using XtSetMappedWhenManaged, making the client responsible for calling XtMapWidget to make the widget viewable.

void XtSetMappedWhenManaged(Widget w, Boolean map_when_managed);

w

Specifies the widget.

map_when_managed

Specifies the new value. If map_when_managed is True, the widget is mapped automatically when it is realized. If map_when_managed is False, the client must call XtMapWidget or make a second call to XtSetMappedWhenManaged to cause the child window to be mapped.

The definition for XtMapWidget is:

void XtMapWidget(Widget w);

w

Specifies the widget.

When you are creating several children in sequence for a previously realized common parent it is generally more efficient to construct a list of children as they are created (using XtCreateWidget) and then use XtManageChildren to request that their parent managed them all at once. By managing a list of children at one time, the parent can avoid wasteful duplication of geometry processing and the associated “screen flash”.

void XtManageChildren(WidgetList children, Cardinal num_children);

children

Specifies a list of children to add.

num_children

Specifies the number of children to add.

If the parent is already visible on the screen, it is especially important to batch updates so that the minimum amount of visible window reconfiguration is performed.

For further information about these functions, see the X Toolkit Intrinsics - C Language Interface.

Destroying Widgets

To destroy a widget instance of any type, use XtDestroyWidget

void XtDestroyWidget(Widget w);

w

Specifies the widget.

XtDestroyWidget destroys the widget and recursively destroys any children that it may have, including the windows created by its children. After calling XtDestroyWidget , no further references should be made to the widget or any children that the destroyed widget may have had.

Retrieving Widget Resource Values

To retrieve the current value of a resource attribute associated with a widget instance, use XtGetValues .

void XtGetValues(Widget w, ArgList args, Cardinal num_args);

w

Specifies the widget.

args

Specifies a variable-length argument list of name and address pairs that contain the resource name and the address into which the resource value is stored.

num_args

Specifies the number of arguments in the argument list.

The arguments and values passed in the argument list are dependent on the widget. Note that the caller is responsible for providing space into which the returned resource value is copied; the ArgList contains a pointer to this storage (e.g. x and y must be allocated as Position). For further information, see the X Toolkit Intrinsics - C Language Interface.

Modifying Widget Resource Values

To modify the current value of a resource attribute associated with a widget instance, use XtSetValues .

void XtSetValues(Widget w, ArgList args, Cardinal num_args);

w

Specifies the widget.

args

Specifies an array of name and value pairs that contain the arguments to be modified and their new values.

num_args

Specifies the number of arguments in the argument list.

The arguments and values that are passed will depend on the widget being modified. Some widgets may not allow certain resources to be modified after the widget instance has been created or realized. No notification is given if any part of a XtSetValues request is ignored.

For further information about these functions, see the X Toolkit Intrinsics - C Language Interface. The argument list entry for XtGetValues specifies the address to which the caller wants the value copied. The argument list entry for XtSetValues , however, contains the new value itself, if the size of value is less than sizeof(XtArgVal) (architecture dependent, but at least sizeof(long)); otherwise, it is a pointer to the value. String resources are always passed as pointers, regardless of the length of the string.

Using the Client Callback Interface

Widgets can communicate changes in their state to their clients by means of a callback facility. The format for a client's callback handler is:

void CallbackProc(Widget w, XtPointer client_data, XtPointer call_data);

w

Specifies widget for which the callback is registered.

client_data

Specifies arbitrary client-supplied data that the widget should pass back to the client when the widget executes the client's callback procedure. This is a way for the client registering the callback to also register client-specific data: a pointer to additional information about the widget, a reason for invoking the callback, and so on. If no additional information is necessary, NULL may be passed as this argument. This field is also frequently known as the closure.

call_data

Specifies any callback-specific data the widget wants to pass to the client. For example, when Scrollbar executes its jumpProc callback list, it passes the current position of the thumb in call_data.

Callbacks can be registered either by creating an argument containing the callback list described below or by using the special convenience routines XtAddCallback and XtAddCallbacks. When the widget is created, a pointer to a list of callback procedure and data pairs can be passed in the argument list to XtCreateWidget . The list is of type XtCallbackList :



typedef struct {
	XtCallbackProc callback;
	XtPointer closure;
} XtCallbackRec, *XtCallbackList;

The callback list must be allocated and initialized before calling XtCreateWidget . The end of the list is identified by an entry containing NULL in callback and closure. Once the widget is created, the client can change or de-allocate this list; the widget itself makes no further reference to it. The closure field contains the client_data passed to the callback when the callback list is executed.

The second method for registering callbacks is to use XtAddCallback after the widget has been created.

void XtAddCallback(Widget w, String callback_name, XtCallbackProc callback, XtPointer client_data);

w

Specifies the widget to add the callback to.

callback_name

Specifies the callback list within the widget to append to.

callback

Specifies the callback procedure to add.

client_data

Specifies the data to be passed to the callback when it is invoked.

XtAddCallback adds the specified callback to the list for the named widget.

All widgets provide a callback list named destroyCallback where clients can register procedures that are to be executed when the widget is destroyed. The destroy callbacks are executed when the widget or an ancestor is destroyed. The call_data argument is unused for destroy callbacks.

Programming Considerations

This section provides some guidelines on how to set up an application program that uses the X Toolkit.

Writing Applications

When writing an application that uses the X Toolkit, you should make sure that your application performs the following:

  1. Include < X11/Intrinsic.h > in your application programs. This header file automatically includes < X11/Xlib.h >, so all Xlib functions also are defined. It may also be necessary to include < X11/StringDefs.h > when setting up argument lists, as many of the XtNsomething definitions are only defined in this file.

  2. Include the widget-specific header files for each widget type that you need to use. For example, < X11/Xaw/Label.h > and < X11/Xaw/Command.h >.

  3. Call the XtAppInitialize function before invoking any other toolkit or Xlib functions. For further information, see Section 2.1 and the X Toolkit Intrinsics - C Language Interface.

  4. To pass attributes to the widget creation routines that will override any site or user customizations, set up argument lists. In this document, a list of valid argument names is provided in the discussion of each widget. The names each have a global symbol defined that begins with XtN to help catch spelling errors. For example, XtNlabel is defined for the label resource of many widgets.

  5. For further information, see Section 2.9.2.2.

  6. When the argument list is set up, create the widget with the XtCreateManagedWidget function. For further information, see Section 2.2 and the X Toolkit Intrinsics - C Language Interface.

  7. If the widget has any callback routines, set by the XtNcallback argument or the XtAddCallback function, declare these routines within the application.

  8. After creating the initial widget hierarchy, windows must be created for each widget by calling XtRealizeWidget on the top level widget.

  9. Most applications now sit in a loop processing events using XtAppMainLoop , for example:

  10. XtCreateManagedWidget(name, class, parent, args, num_args);
    XtRealizeWidget(shell);
    XtAppMainLoop(app_context);
    

  11. For information about this function, see the X Toolkit Intrinsics - C Language Interface.

  12. Link your application with libXaw (the Athena widgets), libXmu (miscellaneous utilities), libXt (the X Toolkit Intrinsics), libSM (Session Management), libICE (Inter-Client Exchange), libXext (the extension library needed for the shape extension code which allows rounded Command buttons), and libX11 (the core X library). The following provides a sample command line:

  13. cc -o application application.c \-lXaw \-lXmu \-lXt \
    \-lSM \-lICE \-lXext \-lX11
    

Changing Resource Values

The Intrinsics support two methods of changing the default resource values; the resource manager, and an argument list passed into XtCreateWidget. While resources values will get updated no matter which method you use, the two methods provide slightly different functionality.

Resource Manager

This method picks up resource definitions described in Xlib - C Language Interface from many different locations at run time. The locations most important to the application programmer are the fallback resources and the app-defaults file, (see X Toolkit Intrinsics - C Language Interface for the complete list). Since these resource are loaded at run time, they can be overridden by the user, allowing an application to be customized to fit the particular needs of each individual user. These values can also be modified without the need to rebuild the application, allowing rapid prototyping of user interfaces. Application programmers should use resources in preference to hard-coded values whenever possible.

Argument Lists

The values passed into the widget at creation time via an argument list cannot be modified by the user, and allow no opportunity for customization. It is used to set resources that cannot be specified as strings (e.g. callback lists) or resources that should not be overridden (e.g. window depth) by the user.

Specifying Resources

It is important for all X Toolkit application programmers to understand how to use the X Resource Manager to specify resources for widgets in an X application. This section will describe the most common methods used to specify these resources, and how to use the X Resource manager.

Xrdb

The xrdb utility may be used to load a file containing resources into the X server. Once the resources are loaded, the resources will affect any new applications started on the display that they were loaded onto.

Application Defaults

The application defaults (app-defaults) file (normally in /usr/lib/X11/app-defaults/classname) for an application is loaded whenever the application is started.

The resource specification has two colon-separated parts, a name, and a value. The value is a string whose format is dependent on the resource specified by name. Name is constructed by appending a resource name to a full widget name.

The full widget name is a list of the name of every ancestor of the desired widget separated by periods (.). Each widget also has a class associated with it. A class is a type of widget (e.g. Label or Scrollbar or Box). Notice that class names, by convention, begin with capital letters and instance names begin with lower case letters. The class of any widget may be used in place of its name in a resource specification. Here are a few examples:

xman.form.button1

This is a fully specified resource name, and will affect only widgets called button1 that are children of widgets called form that are children of applications named xman. (Note that while typically two widgets that are siblings will have different names, it is not prohibited.)

Xman.Form.Command

This will match any Command widget that is a child of a Form widget that is itself a child of an application of class Xman.

Xman.Form.button1

This is a mixed resource name with both widget names and classes specified.

This syntax allows an application programmer to specify any widget in the widget tree. To match more than one widget (for example a user may want to make all Command buttons blue), use an asterisk (*) instead of a period. When an asterisk is used, any number of widgets (including zero) may exist between the two widget names. For example:

Xman*Command

This matches all Command widgets in the Xman application.

Foo*button1

This matches any widget in the Foo application that is named button1.

The root of all application widget trees is the widget returned by XtAppInitialize. Even though this is actually an ApplicationShell widget, the toolkit replaces its widget class with the class name of the application. The name of this widget is either the name used to invoke the application (argv[0]) or the name of the application specified using the standard -name command line option supported by the Intrinsics.

The last step in constructing the resource name is to append the name of the resource with either a period or asterisk to the full or partial widget name already constructed.

*foreground:Blue

Specifies that all widgets in all applications will have a foreground color of blue.

Xman*borderWidth:10

Specifies that all widgets in an application whose class is Xman will have a border width of 10 (pixels).

xman.form.button1.label:Testing

Specifies that a particular widget in the xman application will have a label named Testing.

An exclamation point (!) in the first column of a line indicates that the rest of the line should be treated as a comment.

Final Words

The Resource manager is a powerful tool that can be used very effectively to customize X Toolkit applications at run time by either the application programmer or the user. Some final points to note:

  • An application programmer may add new resources to their application. These resources are associated with the global application, and not any particular widget. The X Toolkit function used for adding the application resources is XtGetApplicationResources.

  • Be careful when creating resource files. Since widgets will ignore resources that they do not understand, any spelling errors will cause a resource to have no effect.

  • Only one resource line will match any given resource. There is a set of precedence rules, which take the following general stance.

    • More specific overrides less specific, thus period always overrides asterisk.

    • Names on the left are more specific and override names on the right.

    • When resource specifications are exactly the same, user defaults will override program defaults.

For a complete explanation of the rules of precedence, and other specific topics see X Toolkit Intrinsics - C Language Interface and Xlib - C Language Interface.

Creating Argument Lists

To set up an argument list for the inline specification of widget attributes, you may use any of the four approaches discussed in this section. Each resource name has a global symbol associated with it. This global symbol has the form XtNresource name. For example, the symbol for “foreground” is XtNforeground. For further information, see the X Toolkit Intrinsics - C Language Interface.

Argument are specified by using the following structure:



typedef struct {
	String name;
	XtArgVal value;
} Arg, *ArgList;

The first approach is to statically initialize the argument list. For example:



static Arg arglist[] = {
	{XtNwidth, (XtArgVal) 400},
	{XtNheight, (XtArgVal) 300},
};

This approach is convenient for lists that do not need to be computed at runtime and makes adding or deleting new elements easy. The XtNumber macro is used to compute the number of elements in the argument list, preventing simple programming errors:

XtCreateWidget(name, class, parent, arglist, XtNumber(arglist));

The second approach is to use the XtSetArg macro. For example:



Arg arglist[10];
XtSetArg(arglist[1], XtNwidth, 400);
XtSetArg(arglist[2], XtNheight, 300);

To make it easier to insert and delete entries, you also can use a variable index:



Arg arglist[10];
Cardinal i=0;
XtSetArg(arglist[i], XtNwidth,  400);       i++;
XtSetArg(arglist[i], XtNheight, 300);       i++;

The i variable can then be used as the argument list count in the widget create function. In this example, XtNumber would return 10, not 2, and therefore is not useful. You should not use auto-increment or auto-decrement within the first argument to XtSetArg . As it is currently implemented, XtSetArg is a macro that dereferences the first argument twice.

The third approach is to individually set the elements of the argument list array:



Arg arglist[10];
arglist[0].name  = XtNwidth;
arglist[0].value = (XtArgVal) 400;
arglist[1].name  = XtNheight;
arglist[1].value = (XtArgVal) 300;

Note that in this example, as in the previous example, XtNumber would return 10, not 2, and therefore would not be useful.

The fourth approach is to use a mixture of the first and third approaches: you can statically define the argument list but modify some entries at runtime. For example:



static Arg arglist[] = {
	{XtNwidth, (XtArgVal) 400},
	{XtNheight, (XtArgVal) NULL},
};
arglist[1].value = (XtArgVal) 300;

In this example, XtNumber can be used, as in the first approach, for easier code maintenance.

Example Programs

The best way to understand how to use any programming library is by trying some simple examples. A collection of example programs that introduces each of the widgets in that Athena widget set, as well as many important toolkit programming concepts, is available in the X11R5 contrib release as distributed by the X Consortium. It can be found in the directory contrib/examples/Xaw in the archive at http://www.x.org/releases/X11R5/contrib-1.tar.Z See the README file from that directory for a guide to the examples.

Chapter 3. Simple Widgets

Each of these widgets performs a specific user interface function. They are simple because they cannot have widget children\(emthey may only be used as leaves of the widget tree. These widgets display information or take user input.

Command

A push button that, when selected, may cause a specific action to take place. This widget can display a multi-line string or a bitmap or pixmap image.

Grip

A rectangle that, when selected, will cause an action to take place.

Label

A rectangle that can display a multi-line string or a bitmap or pixmap image.

List

A list of text strings presented in row column format that may be individually selected. When an element is selected an action may take place.

Panner

A rectangular area containing a slider that may be moved in two dimensions. Notification of movement may be continuous or discrete.

Repeater

A push button that triggers an action at an increasing rate when selected. This widget can display a multi-line string or a bitmap or pixmap image.

Scrollbar

A rectangular area containing a thumb that when slid along one dimension may cause a specific action to take place. The Scrollbar may be oriented horizontally or vertically.

Simple

The base class for most of the simple widgets. Provides a rectangular area with a settable mouse cursor and special border.

StripChart

A real time data graph that will automatically update and scroll.

Toggle

A push button that contains state information. Toggles may also be used as "radio buttons" to implement a "one of many" or "zero or one of many" group of buttons. This widget can display a multi-line string or a bitmap or pixmap image.

Command Widget




Application header file	<X11/Xaw/Command.h>

Class header file	<X11/Xaw/CommandP.h>

Class	commandWidgetClass

Class Name	Command

Superclass	Label

The Command widget is an area, often rectangular, that contains text or a graphical image. Command widgets are often referred to as “push buttons.” When the pointer is over a Command widget, the widget becomes highlighted by drawing a rectangle around its perimeter. This highlighting indicates that the widget is ready for selection. When mouse button 1 is pressed, the Command widget indicates that it has been selected by reversing its foreground and background colors. When the mouse button is released, the Command widget's notify action is invoked, calling all functions on its callback list. If the pointer is moved off of the widget before the pointer button is released, the widget reverts to its normal foreground and background colors, and releasing the pointer button has no effect. This behavior allows the user to cancel an action.

Resources

When creating a Command widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
bitmapBitmapPixmap None
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
callbackCallbackXtCallbackList NULL
colormapColormapColormap Parent's Colormap
cornerRoundPercentCornerRoundPercentDimension 25
cursorCursorCursor None
cursorNameCursorString NULL
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
encodingEncodingUnsignedChar XawTextEncoding8bit
fontFontXFontStruct XtDefaultFont
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAgraphic height + 2 * internalHeight
highlightThicknessThicknessDimensionA2 (0 if Shaped)
insensitiveBorderInsensitivePixmap GreyPixmap
internalHeightHeightDimension 2
internalWidthWidthDimension 4
internationalInternationalBooleanCFalse
justifyJustifyJustify XtJustifyCenter (center)
labelLabelString name of widget
leftBitmapLeftBitmapBitmap None
mappedWhenManagedMappedWhenManagedBoolean True
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
resizeResizeBoolean True
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
shapeStyleShapeStyleShapeStyle Rectangle
translationsTranslationsTranslationTable See below
widthWidthDimensionAgraphic width + 2 * internalWidth
xPositionPosition 0
yPositionPosition 0
_    

\" Resource Descriptions

Command Actions

The Command widget supports the following actions:

  • Switching the button's interior between the foreground and background colors with set, unset, and reset.

  • Processing application callbacks with notify

  • Switching the internal border between highlighted and unhighlighted states with highlight and unhighlight

The following are the default translation bindings used by the Command widget:



	<EnterWindow>:	highlight(\|)
	<LeaveWindow>:	reset(\|)
	<Btn1Down>:	set(\|)
	<Btn1Up>:	notify(\|) unset(\|)

The full list of actions supported by Command is:

highlight(condition)

Displays the internal highlight border in the color (foreground or background ) that contrasts with the interior color of the Command widget. The conditions WhenUnset and Always are understood by this action procedure. If no argument is passed, WhenUnset is assumed.

unhighlight(\|)

Displays the internal highlight border in the color (foreground or background ) that matches the interior color of the Command widget.

set(\|)

Enters the set state, in which notify is possible. This action causes the button to display its interior in the foreground color. The label or bitmap is displayed in the background color.

unset(\|)

Cancels the set state and displays the interior of the button in the background color. The label or bitmap is displayed in the foreground color.

reset(\|)

Cancels any set or highlight and displays the interior of the button in the background color, with the label or bitmap displayed in the foreground color.

notify(\|)

When the button is in the set state this action calls all functions in the callback list named by the callback resource. The value of the call_data argument passed to these functions is undefined.

A very common alternative to registering callbacks is to augment a Command's translations with an action performing the desired function. This often takes the form of:



*Myapp*save.translations: #augment <Btn1Down>,<Btn1Up>: Save()

When a bitmap of depth greater that one (1) is specified the set(), unset(), and reset() actions have no effect, since there are no foreground and background colors used in a multi-plane pixmap.

Grip Widget




Application header file	<X11/Xaw/Grip.h>

Class header file	<X11/Xaw/GripP.h>

Class	gripWidgetClass

Class Name	Grip

Superclass	Simple

The Grip widget provides a small rectangular region in which user input events (such as ButtonPress or ButtonRelease) may be handled. The most common use for the Grip widget is as an attachment point for visually repositioning an object, such as the pane border in a Paned widget.

Resources

When creating a Grip widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 0
callbackCallbackCallback NULL
colormapColormapColormap Parent's Colormap
cursorCursorCursor None
cursorNameCursorString NULL
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
foregroundForegroundPixel XtDefaultForeground
heightHeightDimension 8
insensitiveBorderInsensitivePixmap GreyPixmap
internationalInternationalBooleanCFalse
mappedWhenManagedMappedWhenManagedBoolean True
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
widthWidthDimension 8
xPositionPosition 0
yPositionPosition 0

callback

All routines on this list are called whenever the GripAction action routine is invoked. The call_data contains all information passed to the action routine. A detailed description is given below in the Grip Actions section.

foreground

A pixel value which indexes the widget's colormap to derive the color used to flood fill the entire Grip widget.

Grip Actions

The Grip widget does not declare any default event translation bindings, but it does declare a single action routine named GripAction. The client specifies an arbitrary event translation table, optionally giving parameters to the GripAction routine.

The GripAction routine executes the callbacks on the callback list, passing as call_data a pointer to a XawGripCallData structure, defined in the Grip widget's application header file.






typedef struct _XawGripCallData {
	XEvent *event;
	String *params;
	Cardinal num_params;
} XawGripCallDataRec, *XawGripCallData,
  GripCallDataRec, *GripCallData; /* supported for R4 compatibility */




In this structure, the event is a pointer to the input event that triggered the action. params and num_params give the string parameters specified in the translation table for the particular event binding.

The following is an example of a translation table that uses the GripAction:




	<Btn1Down>:	GripAction(press)
	<Btn1Motion>:	GripAction(move)
	<Btn1Up>:	GripAction(release)

For a complete description of the format of translation tables, see the X Toolkit Intrinsics - C Language Interface.

Label Widget




Application header file	<X11/Xaw/Label.h>

Class header file	<X11/Xaw/LabelP.h>

Class	labelWidgetClass

Class Name	Label

Superclass	Simple

A Label widget holds a graphic displayed within a rectangular region of the screen. The graphic may be a text string containing multiple lines of characters in an 8 bit or 16 bit character set (to be displayed with a font), or in a multi-byte encoding (for use with a fontset). The graphic may also be a bitmap or pixmap. The Label widget will allow its graphic to be left, right, or center justified. Normally, this widget can be neither selected nor directly edited by the user. It is intended for use as an output device only.

Resources

When creating a Label widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
bitmapBitmapPixmap None
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
colormapColormapColormap Parent's Colormap
cursorCursorCursor None
cursorNameCursorString NULL
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
encodingEncodingUnsignedChar XawTextEncoding8bit
fontFontXFontStruct XtDefaultFont
fontSetFontSetXFontSet XtDefaultFontSet
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAgraphic height + 2 * internalHeight
insensitiveBorderInsensitivePixmap GreyPixmap
internalHeightHeightDimension 2
internalWidthWidthDimension 4
internationalInternationalBooleanCFalse
justifyJustifyJustify XtJustifyCenter (center)
labelLabelString name of widget
leftBitmapLeftBitmapBitmap None
mappedWhenManagedMappedWhenManagedBoolean True
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
resizeResizeBoolean True
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable See above
widthWidthDimensionAgraphic width + 2 * internalWidth
xPositionPosition 0
yPositionPosition 0

List Widget




Application header file	<X11/Xaw/List.h>

Class header file	<X11/Xaw/ListP.h>

Class	listWidgetClass

Class Name	List

Superclass	Simple

The List widget contains a list of strings formatted into rows and columns. When one of the strings is selected, it is highlighted, and the List widget's Notify action is invoked, calling all routines on its callback list. Only one string may be selected at a time.

Resources

When creating a List widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
callbackCallbackCallback NULL
colormapColormapColormap Parent's Colormap
columnSpacingSpacingDimension 6
cursorCursorCursor XC_left_ptr
cursorNameCursorString NULL
defaultColumnsColumnsint 2
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
fontFontFontStruct XtDefaultFont
fontSetFontSetXFontSet XtDefaultFontSet
forceColumnsColumnsBoolean False
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAEnough space to contain the list
insensitiveBorderInsensitivePixmap GreyPixmap
internalHeightHeightDimension 2
internalWidthWidthDimension 4
internationalInternationalBooleanCFalse
listListPointer name of widget
longestLongestintA0
mappedWhenManagedMappedWhenManagedBoolean True
numberStringsNumberStringsintAcomputed for NULL terminated list
pasteBufferBooleanBoolean False
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
rowSpacingSpacingDimension 2
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable See below
verticalListBooleanBoolean False
widthWidthDimensionAEnough space to contain the list
xPositionPosition 0
yPositionPosition 0
_    

callback

All functions on this list are called whenever the notify action is invoked. The call_data argument contains information about the element selected and is described in detail in the List Callbacks section.

columnSpacing

rowSpacing

The amount of space, in pixels, between each of the rows and columns in the list.

defaultColumns

The default number of columns. This value is used when neither the width nor the height of the List widget is specified or when forceColumns is True.

font

The text font to use when displaying the list, when the international resource is false.

fontSet

The text font set to use when displaying the list, when the international resource is true.

forceColumns

Forces the default number of columns to be used regardless of the List widget's current size.

foreground

A pixel value which indexes the widget's colormap to derive the color used to paint the text of the list elements.

\fPinternalHeight\fP

\fPinternalWidth\fP

The margin, in pixels, between the edges of the list and the corresponding edge of the List widget's window.

list

An array of text strings displayed in the List widget. If numberStrings is zero (the default) then the list must be NULL terminated. If a value is not specified for the list, then numberStrings is set to 1, and the name of the widget is used as the list, and longest is set to the length of the name of the widget. The list is used in place, and must be available to the List widget for the lifetime of this widget, or until it is changed with XtSetValues or XawListChange.

longest

Specifies the width, in pixels, of the longest string in the current list. The List widget will compute this value if zero (the default) is specified. If this resource is set by hand, entries longer than this will be clipped to fit.

numberStrings

The number of strings in the current list. If a value of zero (the default) is specified, the List widget will compute it. When computing the number of strings the List widget assumes that the list is NULL terminated.

pasteBuffer

If this resource is set to True then the name of the currently selected list element will be put into CUT_BUFFER_0.

verticalList

If this resource is set to True then the list elements will be presented in column major order.

List Actions

The List widget supports the following actions:

  • Highlighting and unhighlighting the list element under the pointer with Set and Unset

  • Processing application callbacks with Notify

The following is the default translation table used by the List Widget:



<Btn1Down>,<Btn1Up>:	Set(\|) Notify(\|)

The full list of actions supported by List widget is:

Set(\|)

Sets the list element that is currently under the pointer. To inform the user that this element is currently set, it is drawn with foreground and background colors reversed. If this action is called when there is no list element under the cursor, the currently set element will be unset.

Unset(\|)

Cancels the set state of the element under the pointer, and redraws it with normal foreground and background colors.

Notify(\|)

Calls all callbacks on the List widget's callback list. Information about the currently selected list element is passed in the call_data argument (see List Callbacks below).

List Callbacks

All procedures on the List widget's callback list will have a XawListReturnStruct passed to them as call_data. The structure is defined in the List widget's application header file.




typedef struct _XawListReturnStruct {
	String string;	/* string shown in the list. */
	int list_index;	/* index of the item selected. */
} XawListReturnStruct;


Note

The list_index item used to be called simply index. Unfortunately, this name collided with a global name defined on some operating systems, and had to be changed.

Changing the List

To change the list that is displayed, use XawListChange .

void XawListChange(Widget w, String* list, intnitems, longest, Boolean resize);

w

Specifies the List widget.

list

Specifies the new list for the List widget to display.

nitems

Specifies the number of items in the list. If a value less than 1 is specified, list must be NULL terminated, and the number of items will be calculated by the List widget.

longest

Specifies the length of the longest item in the list in pixels. If a value less than 1 is specified, the List widget will calculate the value.

resize

Specifies a Boolean value that if True indicates that the List widget should try to resize itself after making the change. The constraints of the List widget's parent are always enforced, regardless of the value specified here.

XawListChange will unset all list elements that are currently set before the list is actually changed. The list is used in place, and must remain usable for the lifetime of the List widget, or until list has been changed again with this function or with XtSetValues.

Highlighting an Item

To highlight an item in the list, use XawListHighlight .

void XawListHighlight(Widget w, int item);

w

Specifies the List widget.

item

Specifies an index into the current list that indicates the item to be highlighted.

Only one item can be highlighted at a time. If an item is already highlighted when XawListHighlight is called, the highlighted item is unhighlighted before the new item is highlighted.

Unhighlighting an Item

To unhighlight the currently highlighted item in the list, use XawListUnhighlight .

void XawListUnhighlight(Widget w);

w

Specifies the List widget.

Retrieving the Currently Selected Item

To retrieve the list element that is currently set, use XawListShowCurrent .

XawListReturnStruct *XawListShowCurrent(Widget w);

w

Specifies the List widget.

XawListShowCurrent returns a pointer to an XawListReturnStruct structure, containing the currently highlighted item. If the value of the index member is XAW_LIST_NONE, the string member is undefined, and no item is currently selected.

Restrictions

Many programmers create a “scrolled list” by putting a List widget with many entries as a child of a Viewport widget. The List continues to create a window as big as its contents, but that big window is only visible where it intersects the parent Viewport's window. (I.e., it is “clipped.”)

While this is a useful technique, there is a serious drawback. X does not support windows above 32,767 pixels in width or height, but this height limit will be exceeded by a List's window when the List has many entries (i.e., with a 12 point font, about 3000 entries would be too many.)

Panner Widget




Application header file	<X11/Xaw/Panner.h>

Class header file	<X11/Xaw/PannerP.h>

Class		pannerWidgetClass

Class Name	Panner

Superclass	Simple

A Panner widget is a rectangle, called the “canvas,” on which another rectangle, the “slider,” moves in two dimensions. It is often used with a Porthole widget to move, or “scroll,” a third widget in two dimensions, in which case the slider's size and position gives feedback as to what portion of the third widget is visible.

The slider may be scrolled around the canvas by pressing, dragging, and releasing Button1; the default translation also enables scrolling via arrow keys and some other keys. While scrolling is in progress, the application receives notification through callback procedures. Notification may be done either continuously whenever the slider moves or discretely whenever the slider has been given a new location.

Resources

When creating a Panner widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
allowOffAllowOffBoolean False
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
backgroundStippleBackgroundStippleString NULL
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
canvasHeightCanvasHeightDimension 0
canvasWidthCanvasWidthDimension 0
colormapColormapColormap Parent's Colormap
cursorCursorCursor None
cursorNameCursorString NULL
defaultScaleDefaultScaleDimension 8
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAdepends on orientation
internalSpaceInternalSpaceDimension 4
internationalInternationalBooleanCFalse
lineWidthLineWidthDimension 0
mappedWhenManagedMappedWhenManagedBoolean True
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
reportCallbackReportCallbackCallback NULL
resizeResizeBoolean True
rubberBandRubberBandBoolean False
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
shadowColorShadowColorPixel XtDefaultForeground
shadowThicknessShadowThicknessDimension 2
sliderXSliderXPosition 0
sliderYSliderYPosition 0
sliderHeightSliderHeightDimension 0
sliderWidthSliderWidthDimension 0
translationsTranslationsTranslationTable See below
widthWidthDimensionAdepends on orientation
xPositionPosition 0
yPositionPosition 0

allowOff

Whether to allow the edges of the slider to go off the edges of the canvas.

backgroundStipple

The name of a bitmap pattern to be used as the background for the area representing the canvas.

canvasHeight

canvasWidth

The size of the canvas.

defaultScale

The percentage size that the Panner widget should have relative to the size of the canvas.

foreground

A pixel value which indexes the widget's colormap to derive the color used to draw the slider.

internalSpace

The width of internal border in pixels between a slider representing the full size of the canvas and the edge of the Panner widget.

lineWidth

The width of the lines in the rubberbanding rectangle when rubberbanding is in effect instead of continuous scrolling. The default is 0.

reportCallback

All functions on this callback list are called when the notify action is invoked. See the Panner Actions section for details.

resize

Whether or not to resize the panner whenever the canvas size is changed so that the defaultScale is maintained.

rubberBand

Whether or not scrolling should be discrete (only moving a rubberbanded rectangle until the scrolling is done) or continuous (moving the slider itself). This controls whether or not the move action procedure also invokes the notify action procedure.

shadowColor

The color of the shadow underneath the slider.

shadowThickness

The width of the shadow underneath the slider.

sliderX

sliderY

The location of the slider in the coordinates of the canvas.

sliderHeight

sliderWidth

The size of the slider.

Panner Actions

The actions supported by the Panner widget are:

start()

This action begins movement of the slider.

stop()

This action ends movement of the slider.

abort()

This action ends movement of the slider and restores it to the position it held when the start action was invoked.

move()

This action moves the outline of the slider (if the rubberBand resource is True) or the slider itself (by invoking the notify action procedure).

page(xamount,yamount)

This action moves the slider by the specified amounts. The format for the amounts is a signed or unsigned floating-point number (e.g., +1.0 or \-.5) followed by either p indicating pages (slider sizes), or c indicating canvas sizes. Thus, page(+0,+.5p) represents vertical movement down one-half the height of the slider and page(0,0) represents moving to the upper left corner of the canvas.

notify()

This action informs the application of the slider's current position by invoking the reportCallback functions registered by the application.

set(what,value)

This action changes the behavior of the Panner. The what argument must currently be the string rubberband and controls the value of the rubberBand resource. The value argument may have one of the values on, off, or toggle.

The default bindings for Panner are:



	<Btn1Down>:	start(\|)
	<Btn1Motion>:	move(\|)
	<Btn1Up>:	notify(\|) stop(\|)
	<Btn2Down>:	abort(\|)
	<Key>KP_Enter:	set(rubberband,toggle)
	<Key>space:	page(+1p,+1p)
	<Key>Delete:	page(\-1p,\-1p)
	<Key>BackSpace:	page(\-1p,\-1p)
	<Key>Left:	page(\-.5p,+0)
	<Key>Right:	page(+.5p,+0)
	<Key>Up:	page(+0,\-.5p)
	<Key>Down:	page(+0,+.5p)
	<Key>Home:	page(0,0)

Panner Callbacks

The functions registered on the reportCallback list are invoked by the notify action as follows:

void ReportProc(Widget panner, XtPointer client_data, XtPointer report);

panner

Specifies the Panner widget.

panner

Specifies the client data.

panner

Specifies a pointer to an XawPannerReport structure containing the location and size of the slider and the size of the canvas.

Repeater Widget




Application header file	<X11/Xaw/Repeater.h>

Class header file	<X11/Xaw/RepeaterP.h>

Class	repeaterWidgetClass

Class Name	Repeater

Superclass	Command

The Repeater widget is a subclass of the Command widget; see the Command documentation for details. The difference is that the Repeater can call its registered callbacks repeatedly, at an increasing rate. The default translation does so for the duration the user holds down pointer button 1 while the pointer is on the Repeater.

Resources

When creating a Repeater widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
bitmapBitmapPixmap None
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
callbackCallbackXtCallbackList NULL
colormapColormapColormap Parent's Colormap
cornerRoundPercentCornerRoundPercentDimension 25
cursorCursorCursor None
cursorNameCursorString NULL
decayDecayInt 5
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
encodingEncodingUnsignedChar XawTextEncoding8bit
flashBooleanBoolean False
fontFontXFontStruct XtDefaultFont
fontSetFontSetXFontSet XtDefaultFontSet
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAgraphic height + 2 * internalHeight
highlightThicknessThicknessDimensionA2 (0 if Shaped)
initialDelayDelayInt 200
insensitiveBorderInsensitivePixmap GreyPixmap
internalHeightHeightDimension 2
internalWidthWidthDimension 4
internationalInternationalBooleanCFalse
justifyJustifyJustify XtJustifyCenter (center)
labelLabelString name of widget
leftBitmapLeftBitmapBitmap None
mappedWhenManagedMappedWhenManagedBoolean True
minimumDelayMinimumDelayInt 10
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
repeatDelayDelayInt 50
resizeResizeBoolean True
screenScreenPointerRParent's Screen
sensitiveSensitiveBoolean True
shapeStyleShapeStyleShapeStyle Rectangle
startCallbackStartCallbackCallback NULL
stopCallbackStopCallbackCallback NULL
translationsTranslationsTranslationTable See below
widthWidthDimensionAgraphic width + 2 * internalWidth
xPositionPosition 0
yPositionPosition 0

\" Resource Descriptions

decay

The number of milliseconds that should be subtracted from each succeeding interval while the Repeater button is being held down until the interval has reached minimumDelay milliseconds.

flash

Whether or not to flash the Repeater button whenever the timer goes off.

initialDelay

The number of milliseconds between the beginning of the Repeater button being held down and the first invocation of the callback function.

minimumDelay

The minimum time between callbacks in milliseconds.

repeatDelay

The number of milliseconds between each callback after the first (minus an increasing number of decays).

startCallback

The list of functions to invoke by the start action (typically when the Repeater button is first pressed). The callback data parameter is set to NULL.

stopCallback

The list of functions to invoke by the stop action (typically when the Repeater button is released). The callback data parameter is set to NULL.

Repeater Actions

The Repeater widget supports the following actions beyond those of the Command button:

start()

This invokes the functions on the startCallback and callback lists and sets a timer to go off in initialDelay milliseconds. The timer will cause the callback functions to be invoked with increasing frequency until the stop action occurs.

stop()

This invokes the functions on the stopCallback list and prevents any further timers from occuring until the next start action.

The following are the default translation bindings used by the Repeater widget:



	<EnterWindow>:	highlight(\|)
	<LeaveWindow>:	unhighlight(\|)
	<Btn1Down>:	set(\|) start(\|)
	<Btn1Up>:	stop(\|) unset(\|)

Scrollbar Widget

Application header file     <X11/Xaw/Scrollbar.h>
Class header file           <X11/Xaw/ScrollbarP.h>
Class                       scrollbarWidgetClass
Class Name                  Scrollbar
Superclass                  Simple

A Scrollbar widget is a rectangle, called the “canvas,” on which another rectangle, the “thumb,” moves in one dimension, either vertically or horizontally. A Scrollbar can be used alone, as a value generator, or it can be used within a composite widget (for example, a Viewport). When a Scrollbar is used to move, or “scroll,” the contents of another widget, the size and the position of the thumb usually give feedback as to what portion of the other widget's contents are visible.

Each pointer button invokes a specific action. Pointer buttons 1 and 3 do not move the thumb automatically. Instead, they return the pixel position of the cursor on the scroll region. When pointer button 2 is clicked, the thumb moves to the current pointer position. When pointer button 2 is held down and the pointer is moved, the thumb follows the pointer.

The pointer cursor in the scroll region changes depending on the current action. When no pointer button is pressed, the cursor appears as a double-headed arrow that points in the direction that scrolling can occur. When pointer button 1 or 3 is pressed, the cursor appears as a single-headed arrow that points in the logical direction that the thumb will move. When pointer button 2 is pressed, the cursor appears as an arrow that points to the top or the left of the thumb.

When the user scrolls, the application receives notification through callback procedures. For both discrete scrolling actions, the callback returns the Scrollbar widget, the client_data, and the pixel position of the pointer when the button was released. For continuous scrolling, the callback routine returns the scroll bar widget, the client data, and the current relative position of the thumb. When the thumb is moved using pointer button 2, the callback procedure is invoked continuously. When either button 1 or 3 is pressed, the callback procedure is invoked only when the button is released and the client callback procedure is responsible for moving the thumb.

Resources

When creating a Scrollbar widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
colormapColormapColormap parent's Colormap
cursorCursorCursor None
cursorNameCursorString NULL
depthDepthintCparent's Depth
destroyCallbackCallbackXtCallbackList NULL
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAdepends on orientation
insensitiveBorderInsensitivePixmap GreyPixmap
internationalInternationalBooleanCFalse
jumpProcCallbackXtCallbackList NULL
lengthLengthDimension 1
mappedWhenManagedMappedWhenManagedBoolean True
minimumThumbMinimumThumbDimension 7
orientationOrientationOrientation XtorientVertical (vertical)
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
screenScreenScreenRparent's Screen
scrollDCursorCursorCursor XC_sb_down_arrow
scrollHCursorCursorCursor XC_sb_h_double_arrow
scrollLCursorCursorCursor XC_sb_left_arrow
scrollProcCallbackXtCallbackList NULL
scrollRCursorCursorCursor XC_sb_right_arrow
scrollUCursorCursorCursor XC_sb_up_arrow
scrollVCursorCursorCursor XC_sb_v_arrow
sensitiveSensitiveBoolean True
shownShownFloat 0.0
thicknessThicknessDimension 14
thumbThumbBitmap GreyPixmap
thumbProcCallbackXtCallbackList NULL
topOfThumbTopOfThumbFloat 0.0
translationsTranslationsTranslationTable See below
widthWidthDimensionAdepends on orientation
xPositionPosition 0
yPositionPosition 0

foreground

A pixel value which indexes the widget's colormap to derive the color used to draw the thumb.

jumpProc

All functions on this callback list are called when the NotifyThumb action is invoked. See the Scrollbar Actions section for details.

length

The height of a vertical scrollbar or the width of a horizontal scrollbar.

minimumThumb

The smallest size, in pixels, to which the thumb can shrink.

orientation

The orientation is the direction that the thumb will be allowed to move. This value can be either XtorientVertical or XtorientHorizontal.

scrollDCursor

This cursor is used when scrolling backward in a vertical scrollbar.

scrollHCursor

This cursor is used when a horizontal scrollbar is inactive.

scrollLCursor

This cursor is used when scrolling forward in a horizontal scrollbar.

scrollProc

All functions on this callback list may be called when the NotifyScroll action is invoked. See the \fBScrollbar Actions\fP section for details.

scrollRCursor

This cursor is used when scrolling backward in a horizontal scrollbar, or when thumbing a vertical scrollbar.

scrollUCursor

This cursor is used when scrolling forward in a vertical scrollbar, or when thumbing a horizontal scrollbar.

scrollVCursor

This cursor is used when a vertical scrollbar is inactive.

shown

This is the size of the thumb, expressed as a percentage (0.0 - 1.0) of the length of the scrollbar.

thickness

The width of a vertical scrollbar or the height of a horizontal scrollbar.

thumb

This pixmap is used to tile (or stipple) the thumb of the scrollbar. If no tiling is desired, then set this resource to None. This resource will accept either a bitmap or a pixmap that is the same depth as the window. The resource converter for this resource constructs bitmaps from the contents of files. (See Converting Bitmaps for details.)

topOfThumb

The location of the top of the thumb, as a percentage (0.0 - 1.0) of the length of the scrollbar. This resource was called top in previous versions of the Athena widget set. The name collided with the a Form widget constraint resource, and had to be changed.

Scrollbar Actions

The actions supported by the Scrollbar widget are:

StartScroll(value)

The possible values are Forward, Backward, or Continuous. This must be the first action to begin a new movement.

NotifyScroll(value)

The possible values are Proportional or FullLength. If the argument to StartScroll was Forward or Backward, NotifyScroll executes the scrollProc callbacks and passes either; the position of the pointer, if value is Proportional, or the full length of the scroll bar, if value is FullLength. If the argument to StartScroll was Continuous, NotifyScroll returns without executing any callbacks.

EndScroll(\^)

This must be the last action after a movement is complete.

MoveThumb(\^)

Repositions the Scrollbar's thumb to the current pointer location.

NotifyThumb(\^)\

Calls the callbacks and passes the relative position of the pointer as a percentage of the scroll bar length.

The default bindings for Scrollbar are:

     <Btn1Down>:     StartScroll(Forward)
     <Btn2Down>:     StartScroll(Continuous) MoveThumb(\|) NotifyThumb(\|)
     <Btn3Down>:     StartScroll(Backward)
     <Btn2Motion>:     MoveThumb(\|) NotifyThumb(\|)
     <BtnUp>:     NotifyScroll(Proportional) EndScroll(\|)

Examples of additional bindings a user might wish to specify in a resource file are:

*Scrollbar.Translations: \\
     ~Meta<Key>space:     StartScroll(Forward) NotifyScroll(FullLength) \\n\\
      Meta<Key>space:     StartScroll(Backward) NotifyScroll(FullLength) \\n\\
          EndScroll(\|)

Scrollbar Callbacks

There are two callback lists provided by the Scrollbar widget. The procedural interface for these functions is described here.

The calling interface to the scrollProc callback procedure is:

void ScrollProc(Widget scrollbar, XtPointer client_data, XtPointer position);

scrollbar

Specifies the Scrollbar widget.

client_data

Specifies the client data.

position

Specifies a pixel position in integer form.

The scrollProc callback is used for incremental scrolling and is called by the NotifyScroll action. The position argument is a signed quantity and should be cast to an int when used. Using the default button bindings, button 1 returns a positive value, and button 3 returns a negative value. In both cases, the magnitude of the value is the distance of the pointer in pixels from the top (or left) of the Scrollbar. The value will never be greater than the length of the Scrollbar.

The calling interface to the jumpProc callback procedure is:

void JumpProc(Widget scrollbar, XtPointer client_data, XtPointer percent_ptr);

scrollbar

Specifies the ID of the scroll bar widget.

client_data

Specifies the client data.

percent_ptr

Specifies the floating point position of the thumb (0.0 \- 1.0).

The jumpProc callback is used to implement smooth scrolling and is called by the NotifyThumb action. Percent_ptr must be cast to a pointer to float before use; i.e.

     float percent = *(float*)percent_ptr;

With the default button bindings, button 2 moves the thumb interactively, and the jumpProc is called on each new position of the pointer, while the pointer button remains down. The value specified by percent_ptr is the current location of the thumb (from the top or left of the Scrollbar) expressed as a percentage of the length of the Scrollbar.

Convenience Routines

To set the position and length of a Scrollbar thumb, use

void XawScrollbarSetThumb(Widget w, float top, float shown);

w

Specifies the Scrollbar widget.

top

Specifies the position of the top of the thumb as a fraction of the length of the Scrollbar.

shown

Specifies the length of the thumb as a fraction of the total length of the Scrollbar.

XawScrollbarThumb moves the visible thumb to a new position (0.0 \- 1.0) and length (0.0 \- 1.0). Either the top or shown arguments can be specified as \-1.0, in which case the current value is left unchanged. Values greater than 1.0 are truncated to 1.0.

If called from jumpProc, XawScrollbarSetThumb has no effect.

Setting Float Resources

The shown and topOfThumb resources are of type float. These resources can be difficult to get into an argument list. The reason is that C performs an automatic cast of the float value to an integer value, usually truncating the important information. The following code fragment is one portable method of getting a float into an argument list.

     top = 0.5;
     if (sizeof(float) > sizeof(XtArgVal)) {
     /*
     \ * If a float is larger than an XtArgVal then pass this
     \ * resource value by reference.
     \ */
          XtSetArg(args[0], XtNshown, &top);
     }
     else {
     /*
     \ * Convince C not to perform an automatic conversion, which
     \ * would truncate 0.5 to 0.
     \ */
          XtArgVal * l_top = (XtArgVal *) &top;
          XtSetArg(args[0], XtNshown, *l_top);
     }

Simple Widget




Application Header file	<Xaw/Simple.h>

Class Header file	<Xaw/SimpleP.h>

Class		simpleWidgetClass

Class Name	Simple

Superclass	Core

The Simple widget is not very useful by itself, as it has no semantics of its own. It main purpose is to be used as a common superclass for the other simple Athena widgets. This widget adds six resources to the resource list provided by the Core widget and its superclasses.

Resources

When creating a Simple widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
colormapColormapColormap Parent's Colormap
cursorCursorCursor None
cursorNameCursorString NULL
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
heightHeightDimension 0
insensitiveBorderInsensitivePixmap GreyPixmap
internationalInternationalBooleanCFalse
mappedWhenManagedMappedWhenManagedBoolean True
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
widthWidthDimension 0
xPositionPosition 0
yPositionPosition 0

StripChart Widget




Application Header file	<Xaw/StripChart.h>

Class Header file	<Xaw/StripCharP.h>

Class		stripChartWidgetClass

Class Name	StripChart

Superclass	Simple

The StripChart widget is used to provide a roughly real time graphical chart of a single value. For example, it is used by the common client program xload to provide a graph of processor load. The StripChart reads data from an application, and updates the chart at the update interval specified.

Resources

When creating a StripChart widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
colormapColormapColormap Parent's Colormap
cursorCursorCursor None
cursorNameCursorString NULL
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
foregroundForegroundPixel XtDefaultForeground
getValueCallbackXtCallbackList NULL
heightHeightDimension 120
highlightForegroundPixel XtDefaultForeground
insensitiveBorderInsensitivePixmap GreyPixmap
internationalInternationalBooleanCFalse
jumpScrollJumpScrollintAhalf the width of the widget
mappedWhenManagedMappedWhenManagedBoolean True
minScaleScaleint 1
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
screenScreenPointerRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
updateIntervalint 10
widthWidthDimension 120
xPositionPosition 0
yPositionPosition 0

foreground

A pixel value which indexes the widget's colormap to derive the color that will be used to draw the graph.

getValue

A list of callback functions to call every update seconds. This list should contain one function, which returns the value to be graphed by the StripChart widget. The following section describes the procedural interface. Behavior when this list has more than one function is undefined.

highlight

A pixel value which indexes the widget's colormap to derive the color that will be used to draw the scale lines on the graph.

jumpScroll

When the graph reaches the right edge of the window it must be scrolled to the left. This resource specifies the number of pixels it will jump. Smooth scrolling can be achieved by setting this resource to 1.

minScale

The minimum scale for the graph. The number of divisions on the graph will always be greater than or equal to this value.

update

The number of seconds between graph updates. Each update is represented on the graph as a 1 pixel wide line. Every update seconds the getValue procedure will be used to get a new graph point, and this point will be added to the right end of the StripChart.

Getting the StripChart Value

The StripChart widget will call the application routine passed to it as the getValue callback function every update seconds to obtain another point for the StripChart graph.

The calling interface for the getValue callback is:

void(*getValueProc)(Widget w, XtPointer client_data, XtPointer value);

w

Specifies the StripChart widget.

client_data

Specifies the client data.

value

Returns a pointer to a double. The application should set the address pointed to by this argument to a double containing the value to be graphed on the StripChart.

This function is used by the StripChart to call an application routine. The routine will pass the value to be graphed back to the the StripChart in the value field of this routine.

Toggle Widget

Application Header file     <Xaw/Toggle.h>
Class Header file     <Xaw/ToggleP.h>
Class          toggleWidgetClass
Class Name     Toggle
Superclass      Command

The Toggle widget is an area, often rectangular, that displays a graphic. The graphic may be a text string containing multiple lines of characters in an 8 bit or 16 bit character set (to be displayed with a font), or in a multi-byte encoding (for use with a fontset). The graphic may also be a bitmap or pixmap.

This widget maintains a Boolean state (e.g. True/False or On/Off) and changes state whenever it is selected. When the pointer is on the Toggle widget, the Toggle widget may become highlighted by drawing a rectangle around its perimeter. This highlighting indicates that the Toggle widget is ready for selection. When pointer button 1 is pressed and released, the Toggle widget indicates that it has changed state by reversing its foreground and background colors, and its notify action is invoked, calling all functions on its callback list. If the pointer is moved off of the widget before the pointer button is released, the Toggle widget reverts to its previous foreground and background colors, and releasing the pointer button has no effect. This behavior allows the user to cancel the operation.

Toggle widgets may also be part of a “radio group.” A radio group is a list of at least two Toggle widgets in which no more than one Toggle may be set at any time. A radio group is identified by the widget ID of any one of its members. The convenience routine XawToggleGetCurrent will return information about the Toggle widget in the radio group.

Toggle widget state is preserved across changes in sensitivity.

Resources

When creating a Toggle widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
bitmapBitmapPixmap None
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
callbackCallbackXtCallbackList NULL
colormapColormapColormap Parent's Colormap
cornerRoundPercentCornerRoundPercentDimension 25
cursorCursorCursor None
cursorNameCursorString NULL
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
encodingEncodingUnsignedChar XawTextEncoding8bit
fontFontXFontStruct XtDefaultFont
fontSetFontSetXFontSet XtDefaultFontSet
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAgraphic height + 2 * internalHeight
highlightThicknessThicknessDimensionA2 (0 if Shaped)
insensitiveBorderInsensitivePixmap GreyPixmap
internalHeightHeightDimension 2
internalWidthWidthDimension 4
internationalInternationalBooleanCFalse
justifyJustifyJustify XtJustifyCenter (center)
labelLabelString name of widget
leftBitmapLeftBitmapBitmap None
mappedWhenManagedMappedWhenManagedBoolean True
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
radioDataRadioDataPointer Name of widget
radioGroupWidgetWidget No radio group
resizeResizeBoolean True
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
shapeStypeShapeStyleShapeStyle Rectangle
stateStateBoolean Off
translationsTranslationsTranslationTable See below
widthWidthDimensionAgraphic width + 2 * internalWidth
xPositionPosition 0
yPositionPosition 0

radioData

Specifies the data that will be returned by XawToggleGetCurrent when this is the currently set widget in the radio group. This value is also used to identify the Toggle that will be set by a call to XawToggleSetCurrent. The value NULL will be returned by XawToggleGetCurrent if no widget in a radio group is currently set. Programmers must not specify NULL (or Zero) as radioData.

radioGroup

Specifies another Toggle widget that is in the radio group to which this Toggle widget should be added. A radio group is a group of at least two Toggle widgets, only one of which may be set at a time. If this value is NULL (the default) then the Toggle will not be part of any radio group and can change state without affecting any other Toggle widgets. If the widget specified in this resource is not already in a radio group then a new radio group will be created containing these two Toggle widgets. No Toggle widget can be in multiple radio groups. The behavior of a radio group of one toggle is undefined. A converter is registered which will convert widget names to widgets without caching.

state

Specifies whether the Toggle widget is set (True) or unset (False).

Toggle Actions

The Toggle widget supports the following actions:

  • Switching the Toggle widget between the foreground and background colors with set and unset and toggle

  • Processing application callbacks with notify

  • Switching the internal border between highlighted and unhighlighted states with highlight and unhighlight

The following are the default translation bindings used by the Toggle widget:

     <EnterWindow>:     highlight(Always)
     <LeaveWindow>:     unhighlight()
     <Btn1Down>,<Btn1Up>:     toggle() notify()

Toggle Actions

The full list of actions supported by Toggle is:

highlight(condition)

Displays the internal highlight border in the color (foreground or background ) that contrasts with the interior color of the Toggle widget. The conditions WhenUnset and Always are understood by this action procedure. If no argument is passed then WhenUnset is assumed.

unhighlight()

Displays the internal highlight border in the color (foreground or background ) that matches the interior color of the Toggle widget.

set()

Enters the set state, in which notify is possible. This action causes the Toggle widget to display its interior in the foreground color. The label or bitmap is displayed in the background color.

unset()

Cancels the set state and displays the interior of the Toggle widget in the background color. The label or bitmap is displayed in the foreground color.

toggle()

Changes the current state of the Toggle widget, causing to be set if it was previously unset, and unset if it was previously set. If the widget is to be set, and is in a radio group then this procedure may unset another Toggle widget causing all routines on its callback list to be invoked. The callback routines for the Toggle that is to be unset will be called before the one that is to be set.

reset()

Cancels any set or highlight and displays the interior of the Toggle widget in the background color, with the label displayed in the foreground color.

notify()

When the Toggle widget is in the set state this action calls all functions in the callback list named by the callback resource. The value of the call_data argument in these callback functions is undefined.

When a bitmap of depth greater that one (1) is specified the set(), unset(), and reset() actions have no effect, since there are no foreground and background colors used in a multi-plane pixmap.

Radio Groups

There are typically two types of radio groups desired by applications. The default translations for the Toggle widget implement a "zero or one of many" radio group. This means that there may be no more than one Toggle widget active, but there need not be any Toggle widgets active.

The other type of radio group is "one of many" and has the more strict policy that there will always be exactly one radio button active. Toggle widgets can be used to provide this interface with a slight modification to the translation table of each Toggle in the group.

     <EnterWindow>:     highlight(Always)
     <LeaveWindow>:     unhighlight()
     <Btn1Down>,<Btn1Up>:     set() notify()

This translation table will not allow any Toggle to be unset except as a result of another Toggle becoming set. It is the application programmer's responsibility to choose an initial state for the radio group by setting the state resource of one of its member widgets to True.

Convenience Routines

The following functions allow easy access to the Toggle widget's radio group functionality.

Changing the Toggle's Radio Group.

To enable an application to change the Toggle's radio group, add the Toggle to a radio group, or remove the Toggle from a radio group, use XawToggleChangeRadioGroup.

void XawToggleChangeRadioGroup(Widgetw, radio_group);

w

Specifies the Toggle widget.

radio_group

Specifies any Toggle in the new radio group. If NULL then the Toggle will be removed from any radio group of which it is a member.

If a Toggle is already set in the new radio group, and the Toggle to be added is also set then the previously set Toggle in the radio group is unset and its callback procedures are invoked. Finding the Currently selected Toggle in a radio group of Toggles

To find the currently selected Toggle in a radio group of Toggle widgets use XawToggleGetCurrent.

XtPointer XawToggleGetCurrent(XtPointer XawToggleGetCurrent(radio_group), Widget radio_group);

radio_group

Specifies any Toggle widget in the radio group.

The value returned by this function is the radioData of the Toggle in this radio group that is currently set. The default value for radioData is the name of that Toggle widget. If no Toggle is set in the radio group specified then NULL is returned. Changing the Toggle that is set in a radio group.

To change the Toggle that is currently set in a radio group use XawToggleSetCurrent.

void XawToggleSetCurrent(voidXawToggleSetCurrent(radio_group, radio_data), Widget radio_group, XtPointer radio_data);

radio_group

Specifies any Toggle widget in the radio group.

radio_data

Specifies the radioData identifying the Toggle that should be set in the radio group specified by the radio_group argument.

XawToggleSetCurrent locates the Toggle widget to be set by matching radio_data against the radioData for each Toggle in the radio group. If none match, XawToggleSetCurrent returns without making any changes. If more than one Toggle matches, XawToggleSetCurrent will choose a Toggle to set arbitrarily. If this causes any Toggle widgets to change state, all routines in their callback lists will be invoked. The callback routines for a Toggle that is to be unset will be called before the one that is to be set. Unsetting all Toggles in a radio group.

To unset all Toggle widgets in a radio group use XawToggleUnsetCurrent.

void XawToggleUnsetCurrent(void XawToggleUnsetCurrent(radio_group), Widget radio_group);

radio_group

Specifies any Toggle widget in the radio group.

If this causes a Toggle widget to change state, all routines on its callback list will be invoked.

Chapter 4. Menus

The Athena widget set provides support for single paned non-hierarchical popup and pulldown menus. Since menus are such a common user interface tool, support for them must be provided in even the most basic widget sets. In menuing as in other areas, the Athena Widget Set provides only basic functionality.

Menus in the Athena widget set are implemented as a menu container (the SimpleMenu widget) and a collection of objects that comprise the menu entries. The SimpleMenu widget is itself a direct subclass of the OverrideShell widget class, so no other shell is necessary when creating a menu. The managed children of a SimpleMenu must be subclasses of the Sme (Simple Menu Entry) object.

The Athena widget set provides three classes of Sme objects that may be used to build menus.

Sme

The base class of all menu entries. It may be used as a menu entry itself to provide blank space in a menu. "Sme" means "Simple Menu Entry."

SmeBSB

This menu entry provides a selectable entry containing a text string. A bitmap may also be placed in the left and right margins. "BSB" means "Bitmap String Bitmap."

SmeLine

This menu entry provides an unselectable entry containing a separator line.

The SimpleMenu widget informs the window manager that it should ignore its window by setting the Override Redirect flag. This is the correct behavior for the press-drag-release style of menu operation. If click-move-click or "pinable" menus are desired it is the responsibility of the application programmer, using the SimpleMenu resources, to inform the window manager of the menu.

To allow easy creation of pulldown menus, a MenuButton widget is also provided as part of the Athena widget set.

Using the Menus

The default configuration for the menus is press-drag-release. The menus will typically be activated by clicking a pointer button while the pointer is over a MenuButton, causing the menu to appear in a fixed location relative to that button; this is a pulldown menu. Menus may also be activated when a specific pointer and/or key sequence is used anywhere in the application; this is a popup menu (e.g. clicking Ctrl-<pointer button 1> in the common application xterm). In this case the menu should be positioned under the cursor. Typically menus will be placed so the pointer cursor is on the first menu entry, or the last entry selected by the user.

The menu remains on the screen as long as the pointer button is held down. Moving the pointer will highlight different menu items. If the pointer leaves the menu, or moves over an entry that cannot be selected then no menu entry will highlighted. When the desired menu entry has been highlighted, releasing the pointer button removes the menu, and causes any mechanism associated with this entry to be invoked.

Sme Object



Application Header file	<X11/Xaw/Sme.h>

Class Header file	<X11/Xaw/SmeP.h>

Class		smeObjectClass

Class Name	Sme

Superclass	RectObj

The Sme object is the base class for all menu entries. While this object is mainly intended to be subclassed, it may be used in a menu to add blank space between menu entries.

Resources

The resources associated with the SmeLine object are defined in this section, and affect only the single menu entry specified by this object. There are no new resources added for this class, as it picks up all its resources from the RectObj class.

NameClassTypeNotesDefault Value
ancestorSensitiveAncestorSensitiveBoolean True
callbackCallbackXtCallbackList NULL
destroyCallbackCallbackXtCallbackList NULL
heightHeightDimension 0
internationalInternationalBooleanCFalse
sensitiveSensitiveBoolean True
widthWidthDimension 1

Keep in mind that the SimpleMenu widget will force all menu items to be the width of the widest entry.

Subclassing the Sme Object

To Create a new Sme object class you will need to define three class methods. These methods allow the SimpleMenu to highlight and unhighlight the menu entry as the pointer cursor moves over it, as well as notify the entry when the user has selected it. All of these methods may be inherited from the Sme object, although the default semantics are not very interesting.

Highlight(\|)

Called to put the menu entry into the highlighted state.

Unhighlight(\|)

Called to return the widget to its normal (unhighlighted) state.

Notify(\|)

Called when the user selects this menu entry.

Other then these methods, creating a new object is straight forward. Here is some information that may help you avoid some common mistakes.

  1. Objects can be zero pixels high.

  2. Objects draw on their parent's window, therefore the Drawing dimensions are different from those of widgets. For instance, y locations vary from y to y + height, not 0 to height.

  3. XtSetValues calls may come from the application while the Sme is highlighted, and if the SetValues method returns True, will result in an expose event. The SimpleMenu may later call the menu entry's unhighlight procedure. However, due to the asynchronous nature of X, the expose event generated by XtSetValues will come after this unhighlight.

  4. Remember that your subclass of the Sme does not own the window. Share the space with other menu entries, and refrain from drawing outside the subclass's own section of the menu.

SmeBSB Object




Application Header file	<X11/Xaw/SmeBSB.h>

Class Header file	<X11/Xaw/SmeBSBP.h>

Class		smeBSBObjectClass

Class Name	SmeBSB

Superclass	Sme

The SmeBSB object is used to create a menu entry that contains a string, and optional bitmaps in its left and right margins. Since each menu entry is an independent object, the application is able to change the font, color, height, and other attributes of the menu entries, on an entry by entry basis. The format of the string may either be the encoding of the 8 bit font utilized, or in a multi-byte encoding for use with a fontSet.

Resources

The resources associated with the SmeBSB object are defined in this section, and affect only the single menu entry specified by this object.

NameClassTypeNotesDefault Value
ancestorSensitiveAncestorSensitiveBooleanDTrue
callbackCallbackCallback NULL
destroyCallbackCallbackXtCallbackList NULL
fontFontFontStruct XtDefaultFont
fontSetFontSetXFontSet XtDefaultFontSet
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAFont height + vertSpace
internationalInternationalBooleanCFalse
justifyJustifyJustify XtjustifyLeft
labelLabelString NULL
leftBitmapLeftBitmapPixmap XtUnspecifiedPixmap
leftMarginleftMarginDimension 4
rightBitmapRightBitmapPixmap XtUnspecifiedPixmap
rightMarginrightMarginDimension 4
sensitiveSensitiveBoolean True
vertSpaceVertSpaceint 25
widthWidthDimensionATextWidth + margins

callback

All callback functions on this list are called when the SimpleMenu notifies this entry that the user has selected it.

font

The text font to use when displaying the label, when the international resource is false.

fontSet

The text font set to use when displaying the label, when the international resource is true.

foreground

A pixel value which indexes the SimpleMenu's colormap to derive the foreground color of the menu entry's window. This color is also used to render all 1's in the left and right bitmaps. Keep in mind that the SimpleMenu widget will force the width of all menu entries to be the width of the longest entry.

justify

How the label is to be rendered between the left and right margins when the space is wider than the actual text. This resource may be specified with the values XtJustifyLeft, XtJustifyCenter, or XtJustifyRight. When specifying the justification from a resource file the values left, center, or right may be used.

label

This is a the string that will be displayed in the menu entry. The exact location of this string within the bounds of the menu entry is controlled by the leftMargin, rightMargin, vertSpace, and justify resources.

leftBitmap

rightBitmap

This is a name of a bitmap to display in the left or right margin of the menu entry. All 1's in the bitmap will be rendered in the foreground color, and all 0's will be drawn in the background color of the SimpleMenu widget. It is the programmers' responsibility to make sure that the menu entry is tall enough, and the appropriate margin wide enough to accept the bitmap. If care is not taken the bitmap may extend into another menu entry, or into this entry's label.

leftMargin

rightMargin

This is the amount of space (in pixels) that will be left between the edge of the menu entry and the label string.

vertSpace

This is the amount of vertical padding, expressed as a percentage of the height of the font, that is to be placed around the label of a menu entry.. The label and bitmaps are always centered vertically within the menu. The default value for this resource (25) causes the default height to be 125% of the height of the font.

SmeLine Object



Application Header file	<X11/Xaw/SmeLine.h>

Class Header file	<X11/Xaw/SmeLineP.h>

Class		smeLineObjectClass

Class Name	SmeLine

Superclass	Sme

The SmeLine object is used to add a horizontal line or menu separator to a menu. Since each SmeLine is an independent object, the application is able to change the color, height, and other attributes of the SmeLine objects on an entry by entry basis. This object is not selectable, and will not highlight when the pointer cursor is over it.

Resources

The resources associated with the SmeLine object are defined in this section, and affect only the single menu entry specified by this object.

NameClassTypeNotesDefault Value
destroyCallbackCallbackXtCallbackList NULL
foregroundForegroundPixel XtDefaultForeground
heightHeightDimension lineWidth
internationalInternationalBooleanCFalse
lineWidthLineWidthDimension 1
stippleStipplePixmap XtUnspecifiedPixmap
widthWidthDimension 1

foreground

A pixel value which indexes the SimpleMenu's colormap to derive the foreground color used to draw the separator line. Keep in mind that the SimpleMenu widget will force all menu items to be the width of the widest entry. Thus, setting the width is generally not very important.

lineWidth

The width of the horizontal line that is to be displayed.

stipple

If a bitmap is specified for this resource, the line will be stippled through it. This allows the menu separator to be rendered as something more exciting than just a line. For instance, if you define a stipple that is a chain link, then your menu separators will look like chains.

Chapter 5. Text Widgets

The Text widget provides a window that will allow an application to display and edit one or more lines of text. Options are provided to allow the user to add Scrollbars to its window, search for a specific string, and modify the text in the buffer.

The Text widget is made up of a number of pieces; it was modularized to ease customization. The AsciiText widget class (actually not limited to ASCII but so named for compatibility) is be general enough to most needs. If more flexibility, special features, or extra functionality is needed, they can be added by implementing a new TextSource or TextSink, or by subclassing the Text Widget (See Section 5.8 for customization details.)

The words insertion point are used in this chapter to refer to the text caret. This is the symbol that is displayed between two characters in the file. The insertion point marks the location where any new characters will be added to the file. To avoid confusion the pointer cursor will always be referred to as the pointer.

The text widget supports three edit modes, controlling the types of modifications a user is allowed to make:

  • Append-only

  • Editable

  • Read-only

Read-only mode does not allow the user or the programmer to modify the text in the widget. While the entire string may be reset in read-only mode with XtSetValues, it cannot be modified via with XawTextReplace. Append-only and editable modes allow the text at the insertion point to be modified. The only difference is that text may only be added to or removed from the end of a buffer in append-only mode.

Text Widget for Users

The Text widget provides many of the common keyboard editing commands. These commands allow users to move around and edit the buffer. If an illegal operation is attempted, (such as deleting characters in a read-only text widget), the X server will beep.

Default Key Bindings

The default key bindings are patterned after those in the EMACS text editor:



Ctrl-a	Beginning Of Line	Meta-b	Backward Word
Ctrl-b	Backward Character	Meta-f	Forward Word
Ctrl-d	Delete Next Character	Meta-i	Insert File
Ctrl-e	End Of Line	Meta-k	Kill To End Of Paragraph
Ctrl-f	Forward Character	Meta-q	Form Paragraph
Ctrl-g	Multiply Reset	Meta-v	Previous Page
Ctrl-h	Delete Previous Character	Meta-y	Insert Current Selection
Ctrl-j	Newline And Indent	Meta-z	Scroll One Line Down
Ctrl-k	Kill To End Of Line	Meta-d	Delete Next Word
Ctrl-l	Redraw Display	Meta-D	Kill Word
Ctrl-m	Newline	Meta-h	Delete Previous Word
Ctrl-n	Next Line	Meta-H	Backward Kill Word
Ctrl-o	Newline And Backup	Meta-<	Beginning Of File
Ctrl-p	Previous Line	Meta->	End Of File
Ctrl-r	Search/Replace Backward	Meta-]	Forward Paragraph
Ctrl-s	Search/Replace Forward	Meta-[	Backward Paragraph
Ctrl-t	Transpose Characters
Ctrl-u	Multiply by 4	Meta-Delete	Delete Previous Word
Ctrl-v	Next Page	Meta-Shift Delete	Kill Previous Word
Ctrl-w	Kill Selection	Meta-Backspace	Delete Previous Word
Ctrl-y	Unkill	Meta-Shift Backspace	Kill Previous Word
Ctrl-z	Scroll One Line Up
Ctrl-\\	Reconnect to input method
Kanji	Reconnect to input method

In addition, the pointer may be used to cut and paste text:



	Button 1 Down	Start Selection
	Button 1 Motion	Adjust Selection
	Button 1 Up	End Selection (cut)

	Button 2 Down	Insert Current Selection (paste)

	Button 3 Down	Extend Current Selection
	Button 3 Motion	Adjust Selection
	Button 3 Up	End Selection (cut)

Since all of these key and pointer bindings are set through the translations and resource manager, the user and the application programmer can modify them by changing the Text widget's translations resource.

Search and Replace

The Text widget provides a search popup that can be used to search for a string within the current Text widget. The popup can be activated by typing either Control-r or Control-s. If Control-s is used the search will be forward in the file from the current location of the insertion point; if Control-r is used the search will be backward. The activated popup is placed under the pointer. It has a number of buttons that allow both text searches and text replacements to be performed.

At the top of the search popup are two toggle buttons labeled backward and forward. One of these buttons will always be highlighted; this is the direction in which the search will be performed. The user can change the direction at any time by clicking on the appropriate button.

Directly under the buttons there are two text areas, one labeled Search for: and the other labeled Replace with:. If this is a read-only Text widget the Replace with: field will be insensitive and no replacements will be allowed. After each of these labels will be a text field. This field will allow the user to enter a string to search for and the string to replace it with. Only one of these text fields will have a window border around it; this is the active text field. Any key presses that occur when the focus in in the search popup will be directed to the active text field. There are also a few special key sequences:



Carriage Return:	Execute the action, and pop down the search widget.
Tab:	Execute the action, then move to the next field.
Shift Carriage Return:	Execute the action, then move to the next field.
Control-q Tab:	Enter a Tab into a text field.
Control-c:	Pop down the search popup.

Using these special key sequences should allow simple searches without ever removing one's hands from the keyboard.

Near the bottom of the search popup is a row of buttons. These buttons allow the same actions to to be performed as the key sequences, but the buttons will leave the popup active. This can be quite useful if many searches are being performed, as the popup will be left on the display. Since the search popup is a transient window, it may be picked up with the window manager and pulled off to the side for use at a later time.

Search

Search for the specified string.

Replace

Replace the currently highlighted string with the string in the Replace with text field, and move onto the next occurrence of the Search for text field. The functionality is commonly referred to as query-replace.

ReplaceAll

Replace all occurrences of the search string with the replace string from the current insertion point position to the end (or beginning) of the file. There is no key sequence to perform this action.

ReplaceAll

Remove the search popup from the screen.

Finally, when international resource is true, there may be a pre-edit buffer below the button row, for composing input. Its presence is determined by the X locale in use and the VendorShell's preeditType resource.

The widget hierarchy for the search popup is show below, all widgets are listed by class and instance name.

Text  <name of Text widget>
	TransientShell  search
		Form  form
			Label label1
			Label  label2
			Toggle  backwards
			Toggle  forwards
			Label  searchLabel
			Text  searchText
			Label  replaceLabel
			Text  replaceText
			Command  search
			Command  replaceOne
			Command  replaceAll
			Command  cancel

File Insertion

To insert a file into a text widget, type the key sequence Meta-i, which will activate the file insert popup. This popup will appear under the pointer, and any text typed while the focus is in this popup will be redirected to the text field used for the filename. When the desired filename has been entered, click on Insert File, or type Carriage Return. The named file will then be inserted in the text widget beginning at the insertion point position. If an error occurs when opening the file, an error message will be printed, prompting the user to enter the filename again. The file insert may be aborted by clicking on Cancel. If Meta-i is typed at a text widget that is read-only, it will beep, as no file insertion is allowed.

The widget hierarchy for the file insert popup is show below; all widgets are listed by class and instance name.

Text  <name of Text widget>
	TransientShell  insertFile
		Form  form
			Label  label
			Text  text
			Command  insert
			Command  cancel

Text Selections for Users

The text widgets have a text selection mechanism that allows the user to copy pieces of the text into the PRIMARY selection, and paste into the text widget some text that another application (or text widget) has put in the PRIMARY selection.

One method of selecting text is to press pointer button 1 on the beginning of the text to be selected, drag the pointer until all of the desired text is highlighted, and then release the button to activate the selection. Another method is to click pointer button 1 at one end of the text to be selected, then click pointer button 3 at the other end.

To modify a currently active selection, press pointer button 3 near either the end of the selection that you want to adjust. This end of the selection may be moved while holding down pointer button 3. When the proper area has been highlighted release the pointer button to activate the selection.

The selected text may now be pasted into another application, and will remain active until some other client makes a selection. To paste text that some other application has put into the PRIMARY selection use pointer button 2. First place the insertion point where you would like the text to be inserted, then click and release pointer button 2.

Rapidly clicking pointer button 1 the following number of times will adjust the selection as described.

Two

Select the word under the pointer. A word boundary is defined by the Text widget to be a Space, Tab, or Carriage Return.

Three

Select the line under the pointer.

Four

Select the paragraph under the pointer. A paragraph boundary is defined by the text widget as two Carriage Returns in a row with only Spaces or Tabs between them.

Five

Select the entire text buffer.

To unset the text selection, click pointer button 1 without moving it.

Text Widget Actions

All editing functions are performed by translation manager actions that may be specified through the translations resource in the Text widget.



Insert Point Movement     Delete
     forward-character         delete-next-character
     backward-character        delete-previous-character
     forward-word              delete-next-word
     backward-word             delete-previous-word
     forward-paragraph         delete-selection
     backward-paragraph
     beginning-of-line
     end-of-line          Selection
     next-line                 select-word
     previous-line             select-all
     next-page                 select-start
     previous-page             select-adjust
     beginning-of-file         select-end
     end-of-file               extend-start
     scroll-one-line-up        extend-adjust
     scroll-one-line-down      extend-end
                               insert-selection


Miscellaneous             New Line
     redraw-display            newline-and-indent
     insert-file               newline-and-backup
     insert-char               newline
     insert-string
     display-caret
     focus-in             Kill
     focus-in                  kill-word
     search                    backward-kill-word
     multiply                  kill-selection
     form-paragraph            kill-to-end-of-line
     transpose-characters      kill-paragraph
     no-op                     kill-to-end-of-paragraph
     XawWMProtocols
     reconnect-im

Most of the actions take no arguments, and unless otherwise noted you may assume this to be the case.

Cursor Movement Actions\fP

forward-character()

backward-character()

These actions move the insert point forward or backward one character in the buffer. If the insert point is at the end or beginning of a line this action will move the insert point to the next (or previous) line.

forward-word()

backward-word()

These actions move the insert point to the next or previous word boundary. A word boundary is defined as a Space, Tab or Carriage Return.

forward-paragraph()

backward-paragraph()

These actions move the insert point to the next or previous paragraph boundary. A paragraph boundary is defined as two Carriage Returns in a row with only Spaces or Tabs between them.

beginning-of-line()

end-of-line()

These actions move to the beginning or end of the current line. If the insert point is already at the end or beginning of the line then no action is taken.

next-line()

previous-line()

These actions move the insert point up or down one line. If the insert point is currently N characters from the beginning of the line then it will be N characters from the beginning of the next or previous line. If N is past the end of the line, the insert point is placed at the end of the line.

next-page()

previous-page()

These actions move the insert point up or down one page in the file. One page is defined as the current height of the text widget. The insert point is always placed at the first character of the top line by this action.

beginning-of-file()

end-of-file()

These actions place the insert point at the beginning or end of the current text buffer. The text widget is then scrolled the minimum amount necessary to make the new insert point location visible.

scroll-one-line-up()

scroll-one-line-down()

These actions scroll the current text field up or down by one line. They do not move the insert point. Other than the scrollbars this is the only way that the insert point may be moved off of the visible text area. The widget will be scrolled so that the insert point is back on the screen as soon as some other action is executed.

Delete Actions

delete-next-character()

delete-previous-character()

These actions remove the character immediately before or after the insert point. If a Carriage Return is removed then the next line is appended to the end of the current line.

delete-next-word()

delete-previous-word()

These actions remove all characters between the insert point location and the next word boundary. A word boundary is defined as a Space, Tab or Carriage Return.

delete-selection()

This action removes all characters in the current selection. The selection can be set with the selection actions.

Selection Actions

select-word()

This action selects the word in which the insert point is currently located. If the insert point is between words then it will select the previous word.

select-all()

This action selects the entire text buffer.

select-start()

This action sets the insert point to the current pointer location (if triggered by a button event) or text cursor location (if triggered by a key event). It will then begin a selection at this location. If many of these selection actions occur quickly in succession then the selection count mechanism will be invoked (see the section titled \fBText Selections for Application Programmers\fP for details).

select-adjust()

This action allows a selection started with the select-start action to be modified, as described above.

select-end(name[,name,...])

This action ends a text selection that began with the select-start action, and asserts ownership of the selection or selections specified. A name can be a selection (e.g., PRIMARY) or a cut buffer (e.g., CUT_BUFFER0). Note that case is important. If no names are specified, PRIMARY is asserted.

extend-start()

This action finds the nearest end of the current selection, and moves it to the current pointer location (if triggered by a button event) or text cursor location (if triggered by a key event).

extend-adjust()

This action allows a selection started with an extend-start action to be modified.

extend-end(name[,name,...])

This action ends a text selection that began with the extend-start action, and asserts ownership of the selection or selections specified. A name can be a selection (e.g. PRIMARY) or a cut buffer (e.g CUT_BUFFER0). Note that case is important. If no names are given, PRIMARY is asserted.

insert-selection(name[,name,...])

This action retrieves the value of the first (left-most) named selection that exists or the cut buffer that is not empty and inserts it into the Text widget at the current insert point location. A name can be a selection (e.g. PRIMARY) or a cut buffer (e.g CUT_BUFFER0). Note that case is important.

The New Line Actions

newline-and-indent()

This action inserts a newline into the text and adds spaces to that line to indent it to match the previous line.

newline-and-backup()

This action inserts a newline into the text after the insert point.

newline()

This action inserts a newline into the text before the insert point.

Kill and Actions

kill-word()

backward-kill-word()

These actions act exactly like the delete-next-word and delete-previous-word actions, but they stuff the word that was killed into the kill buffer (CUT_BUFFER_1).

kill-selection()

This action deletes the current selection and stuffs the deleted text into the kill buffer (CUT_BUFFER_1).

kill-to-end-of-line()

This action deletes the entire line to the right of the insert point position, and stuffs the deleted text into the kill buffer (CUT_BUFFER_1).

kill-paragraph()

This action deletes the current paragraph, if between paragraphs it deletes the paragraph above the insert point, and stuffs the deleted text into the kill buffer (CUT_BUFFER_1).

kill-to-end-of-paragraph()

This action deletes everything between the current insert point location and the next paragraph boundary, and stuffs the deleted text into the kill buffer (CUT_BUFFER_1).

Miscellaneous Actions

redraw-display()

This action recomputes the location of all the text lines on the display, scrolls the text to vertically center the line containing the insert point on the screen, clears the entire screen, and redisplays it.

insert-file([filename])

This action activates the insert file popup. The filename option specifies the default filename to put in the filename buffer of the popup. If no filename is specified the buffer is empty at startup.

insert-char()

This action may only be attached to a key event. When the international resource is false, this action calls XLookupString to translate the event into a (rebindable) Latin-1 character (sequence) and inserts it into the text at the insert point. When the international resource is true, characters are passed to the input method via XwcLookupString, and any committed string returned is inserted into the text at the insert point.

insert-string(string[,string,...])

This action inserts each string into the text at the insert point location. Any string beginning with the characters "0x" followed by an even number of hexadecimal digits is interpreted as a hexadecimal constant and the corresponding string is inserted instead. This hexadecimal string may represent up to 50 8-bit characters. When theinternational resource is true, a hexadecimal string is intrepeted as being in a multi-byte encoding, and a hexadecimal or regular string will result in an error message if it is not legal in the current locale.

display-caret(state,when)

This action allows the insert point to be turned on and off. The state argument specifies the desired state of the insert point. This value may be any of the string values accepted for Boolean resources (e.g. on, True, off, False, etc.). If no arguments are specified, the default value is True. The when argument specifies, for EnterNotify or LeaveNotify events whether or not the focus field in the event is to be examined. If the second argument is not specified, or specified as something other than always then if the action is bound to an EnterNotify or LeaveNotify event, the action will be taken only if the focus field is True. An augmented binding that might be useful is:



     *Text.Translations: #override \\
          <FocusIn>:     display-caret(on) \\n\\
          <FocusOut>:     display-caret(off)

focus-in()

focus-out()

These actions do not currently do anything.

search(direction,[string])

This action activates the search popup. The direction must be specified as either forward or backward. The string is optional and is used as an initial value for the Search for: string. For further explanation of the search widget see the section on Text Searches.

multiply(value)

The multiply action allows the user to multiply the effects of many of the text actions. Thus the following action sequence multiply(10) delete-next-word() will delete 10 words. It does not matter whether these actions take place in one event or many events. Using the default translations the key sequence \fIControl-u, Control-d\fP will delete 4 characters. Multiply actions can be chained, thus \fImultiply(5) multiply(5)\fP is the same as multiply(25). If the string reset is passed to the multiply action the effects of all previous multiplies are removed and a beep is sent to the display.

form-paragraph()

This action removes all the Carriage Returns from the current paragraph and reinserts them so that each line is as long as possible, while still fitting on the current screen. Lines are broken at word boundaries if at all possible. This action currently works only on Text widgets that use ASCII text.

transpose-characters()

This action will swap the position of the character to the left of the insert point with the character to the right of the insert point. The insert point will then be advanced one character.

no-op([action])

The no-op action makes no change to the text widget, and is mainly used to override translations. This action takes one optional argument. If this argument is RingBell then a beep is sent to the display.

XawWMProtocols([wm_protocol_name])

This action is written specifically for the file insertion and the search and replace dialog boxes. This action is attached to those shells by the Text widget, in order to handle ClientMessage events with the WM_PROTOCOLS atom in the detail field. This action supports WM_DELETE_WINDOW on the Text widget popups, and may support other window manager protocols if necessary in the future. The popup will be dismissed if the window manager sends a WM_DELETE_WINDOW request and there are no parameters in the action call, which is the default. The popup will also be dismissed if the parameters include the string “wm_delete_window,” and the event is a ClientMessage event requesting dismissal or is not a ClientMessage event. This action is not sensitive to the case of the strings passed as parameters.

reconnect-im()

When the international resource is true, input is usually passed to an input method, a separate process, for composing. Sometimes the connection to this process gets severed; this action will attempt to reconnect it. Causes for severage include network trouble, and the user explicitly killing one input method and starting a new one. This action may also establish first connection when the application is started before the input method.

Text Selections for Application Programmers

The default behavior of the text selection array is described in the section called Text Selections for Users. To modify the selections a programmer must construct a XawTextSelectType array (called the selection array), containing the selections desired, and pass this as the new value for the selectionTypes resource. The selection array may also be modified using the XawTextSetSelectionArray function. All selection arrays must end with the value XawselectNull. The selectionTypes resource has no converter registered and cannot be modified through the resource manager.

The array contains a list of entries that will be called when the user attempts to select text in rapid succession with the select-start action (usually by clicking a pointer button). The first entry in the selection array will be used when the select-start action is initially called. The next entry will be used when select-start is called again, and so on. If a timeout value (1/10 of a second) is exceeded, the the next select-start action will begin at the top of the selection array. When XawselectNull is reached the array is recycled beginning with the first element.

XawselectAllSelects the contents of the entire buffer.
XawselectCharSelects text characters as the pointer moves over them.
XawselectLineSelects the entire line.
XawselectNullIndicates the end of the selection array.
XawselectParagraphSelects the entire paragraph.
XawselectPositionSelects the current pointer position.
XawselectWordSelects whole words as the pointer moves onto them.

The default selectType array is:

{XawselectPosition, XawselectWord, XawselectLine, XawselectParagraph, XawselectAll, XawselectNull}

The selection array is not copied by the text widgets. The application must allocate space for the array and cannot deallocate or change it until the text widget is destroyed or until a new selection array is set.

Default Translation Bindings

The following translations are defaults built into every Text widget. They can be overridden, or replaced by specifying a new value for the Text widget's translations resource.



     Ctrl<Key>A:     beginning-of-line() \\n\\
     Ctrl<Key>B:     backward-character() \\n\\
     Ctrl<Key>D:     delete-next-character() \\n\\
     Ctrl<Key>E:     end-of-line() \\n\\
     Ctrl<Key>F:     forward-character() \\n\\
     Ctrl<Key>G:     multiply(Reset) \\n\\
     Ctrl<Key>H:     delete-previous-character() \\n\\
     Ctrl<Key>J:     newline-and-indent() \\n\\
     Ctrl<Key>K:     kill-to-end-of-line() \\n\\
     Ctrl<Key>L:     redraw-display() \\n\\
     Ctrl<Key>M:     newline() \\n\\
     Ctrl<Key>N:     next-line() \\n\\
     Ctrl<Key>O:     newline-and-backup() \\n\\
     Ctrl<Key>P:     previous-line() \\n\\
     Ctrl<Key>R:     search(backward) \\n\\
     Ctrl<Key>S:     search(forward) \\n\\
     Ctrl<Key>T:     transpose-characters() \\n\\
     Ctrl<Key>U:     multiply(4) \\n\\
     Ctrl<Key>V:     next-page() \\n\\
     Ctrl<Key>W:     kill-selection() \\n\\
     Ctrl<Key>Y:     insert-selection(CUT_BUFFER1) \\n\\
     Ctrl<Key>Z:     scroll-one-line-up() \\n\\
     Ctrl<Key>\\:     reconnect-im() \\n\\
     Meta<Key>B:     backward-word() \\n\\
     Meta<Key>F:     forward-word() \\n\\
     Meta<Key>I:     insert-file() \\n\\
     Meta<Key>K:     kill-to-end-of-paragraph() \\n\\
     Meta<Key>Q:     form-paragraph() \\n\\
     Meta<Key>V:     previous-page() \\n\\
     Meta<Key>Y:     insert-selection(PRIMARY, CUT_BUFFER0) \\n\\
     Meta<Key>Z:     scroll-one-line-down() \\n\\
     :Meta<Key>d:     delete-next-word() \\n\\
     :Meta<Key>D:     kill-word() \\n\\
     :Meta<Key>h:     delete-previous-word() \\n\\
     :Meta<Key>H:     backward-kill-word() \\n\\
     :Meta<Key>\\<:     beginning-of-file() \\n\\
     :Meta<Key>\\>:     end-of-file() \\n\\
     :Meta<Key>]:     forward-paragraph() \\n\\
     :Meta<Key>[:     backward-paragraph() \\n\\
     ~Shift Meta<Key>Delete:          delete-previous-word() \\n\\
     \ Shift Meta<Key>Delete:          backward-kill-word() \\n\\
     ~Shift Meta<Key>Backspace:     delete-previous-word() \\n\\
     \ Shift Meta<Key>Backspace:     backward-kill-word() \\n\\
     <Key>Right:     forward-character() \\n\\
     <Key>Left:     backward-character() \\n\\
     <Key>Down:     next-line() \\n\\
     <Key>Up:     previous-line() \\n\\
     <Key>Delete:     delete-previous-character() \\n\\
     <Key>BackSpace:     delete-previous-character() \\n\\
     <Key>Linefeed:     newline-and-indent() \\n\\
     <Key>Return:     newline() \\n\\
     <Key>:          insert-char() \\n\\
     <Key>Kanji:     reconnect-im() \\n\\
     <FocusIn>:     focus-in() \\n\\
     <FocusOut>:     focus-out() \\n\\
     <Btn1Down>:     select-start() \\n\\
     <Btn1Motion>:     extend-adjust() \\n\\
     <Btn1Up>:     extend-end(PRIMARY, CUT_BUFFER0) \\n\\
     <Btn2Down>:     insert-selection(PRIMARY, CUT_BUFFER0) \\n\\
     <Btn3Down>:     extend-start() \\n\\
     <Btn3Motion>:     extend-adjust() \\n\\
     <Btn3Up>:     extend-end(PRIMARY, CUT_BUFFER0) \\n

Text Functions

The following functions are provided as convenience routines for use with the Text widget. Although many of these actions can be performed by modifying resources, these interfaces are frequently more efficient.

These data structures are defined in the Text widget's public header file, <X11/Xaw/Text.h>.

typedef long XawTextPosition;

Character positions in the Text widget begin at 0 and end at n, where n is the number of characters in the Text source widget.



typedef struct {
	int firstPos;
	int length;
	char *ptr;
	unsigned long format;
} XawTextBlock, *XawTextBlockPtr;

firstPos

The first position, or index, to use within the ptr field. The value is commonly zero.

length

The number of characters to be used from the ptr field. The number of characters used is commonly the number of characters in ptr, and must not be greater than the length of the string in ptr.

ptr

Contains the string to be referenced by the Text widget.

format

This flag indicates whether the data pointed to by ptr is char or wchar_t. When the associated widget has international set to false this field must be XawFmt8Bit. When the associated widget has international set to true this field must be either XawFmt8Bit or XawFmtWide.

Note

Note: Previous versions of Xaw used FMT8BIT , which has been retained for backwards compatibility. FMT8BIT is deprecated and will eventually be removed from the implementation.

Selecting Text

To select a piece of text, use XawTextSetSelection :

void XawTextSetSelection(Widget w, XawTextPositionleft, right);

w

Specifies the Text widget.

left

Specifies the character position at which the selection begins.

right

Specifies the character position at which the selection ends.

See section 5.4 for a description of XawTextPosition. If redisplay is enabled, this function highlights the text and makes it the PRIMARY selection. This function does not have any effect on CUT_BUFFER0.

Unhighlighting Text

To unhighlight previously highlighted text in a widget, use XawTextUnsetSelection:

void XawTextUnsetSelection(Widget w);

w

Specifies the Text widget.

Getting Current Text Selection

To retrieve the text that has been selected by this text widget use XawTextGetSelectionPos:

void XawTextGetSelectionPos(Widget w, XawTextPosition*begin_return, *end_return);

w

Specifies the Text widget.

begin_return

Returns the beginning of the text selection.

end_return

Returns the end of the text selection.

See section 5.4 for a description of XawTextPosition. If the returned values are equal, no text is currently selected.

Replacing Text

To modify the text in an editable Text widget use XawTextReplace:

int XawTextReplace(Widget w, XawTextPositionstart, end, XawTextBlock *text);

w

Specifies the Text widget.

start

Specifies the starting character position of the text replacement.

end

Specifies the ending character position of the text replacement.

text

Specifies the text to be inserted into the file.

This function will not be able to replace text in read-only text widgets. It will also only be able to append text to an append-only text widget.

See section 5.4 for a description of XawTextPosition and XawTextBlock.

This function may return the following values:

XawEditDone

The text replacement was successful.

XawPositionError

The edit mode is XawtextAppend and start is not the position of the last character of the source.

XawEditError

Either the Source was read-only or the range to be deleted is larger than the length of the Source.

The XawTextReplace arguments start and end represent the text source character positions for the existing text that is to be replaced by the text in the text block. The characters from start up to but not including end are deleted, and the characters specified on the text block are inserted in their place. If start and end are equal, no text is deleted and the new text is inserted after start.

Searching for Text

To search for a string in the Text widget, use XawTextSearch:

XawTextPosition XawTextSearch(Widget w, XawTextScanDirection dir, XawTextBlock* text);

w

Specifies the Text widget.

dir

Specifies the direction to search in. Legal values are XawsdLeft and XawsdRight.

text

Specifies a text block structure that contains the text to search for.

See section 5.4 for a description of XawTextPosition and XawTextBlock. The XawTextSearch function will begin at the insertion point and search in the direction specified for a string that matches the one passed in text. If the string is found the location of the first character in the string is returned. If the string could not be found then the value XawTextSearchError is returned.

Redisplaying Text

To redisplay a range of characters, use XawTextInvalidate:

void XawTextInvalidate(Widget w, XawTextPositionfrom, to);

w

Specifies the Text widget.

from

Specifies the start of the text to redisplay.

to

Specifies the end of the text to redisplay.

See section 5.4 for a description of XawTextPosition. The XawTextInvalidate function causes the specified range of characters to be redisplayed immediately if redisplay is enabled or the next time that redisplay is enabled.

To enable redisplay, use XawTextEnableRedisplay:

void XawTextEnableRedisplay(Widget w);

w

Specifies the Text widget.

The XawTextEnableRedisplay function flushes any changes due to batched updates when XawTextDisableRedisplay was called and allows future changes to be reflected immediately.

To disable redisplay while making several changes, use XawTextDisableRedisplay.

void XawTextDisableRedisplay(Widget w);

w

Specifies the Text widget.

The XawTextDisableRedisplay function causes all changes to be batched until either XawTextDisplay or XawTextEnableRedisplay is called.

To display batched updates, use XawTextDisplay:

void XawTextDisplay(Widget w);

w

Specifies the Text widget.

The XawTextDisplay function forces any accumulated updates to be displayed.

Resources Convenience Routines

To obtain the character position of the left-most character on the first line displayed in the widget (the value of the displayPosition resource), use XawTextTopPosition.

XawTextPosition XawTextTopPosition(Widget w);

w

Specifies the Text widget.

To assign a new selection array to a text widget use XawTextSetSelectionArray:

void XawTextSetSelectionArray(Widget w, XawTextSelectType* sarray);

w

Specifies the Text widget.

sarray

Specifies a selection array as defined in the section called \fBText Selections for Application Programmers\fP.

Calling this function is equivalent to setting the value of the selectionTypes resource.

To move the insertion point to the specified source position, use XawTextSetInsertionPoint:

void XawTextSetInsertionPoint(Widget w, XawTextPosition position);

w

Specifies the Text widget.

position

Specifies the new position for the insertion point.

See section 5.4 for a description of XawTextPosition. The text will be scrolled vertically if necessary to make the line containing the insertion point visible. Calling this function is equivalent to setting the insertPosition resource.

To obtain the current position of the insertion point, use XawTextGetInsertionPoint:

XawTextPosition XawTextGetInsertionPoint(Widget w);

w

Specifies the Text widget.

See section 5.4 for a description of XawTextPosition. The result is equivalent to retrieving the value of the insertPosition resource.

To replace the text source in the specified widget, use XawTextSetSource:

void XawTextSetSource(Widget w, Widget source, XawTextPosition position);

w

Specifies the Text widget.

source

Specifies the text source object.

position

Specifies character position that will become the upper left hand corner of the displayed text. This is usually set to zero.

See section 5.4 for a description of XawTextPosition. A display update will be performed if redisplay is enabled.

To obtain the current text source for the specified widget, use XawTextGetSource:

Widget XawTextGetSource(Widget w);

w

Specifies the Text widget.

This function returns the text source that this Text widget is currently using.

To enable and disable the insertion point, use XawTextDisplayCaret:

void XawTextDisplayCaret(Widget w, Boolean visible);

w

Specifies the Text widget.

visible

Specifies whether or not the caret should be displayed.

If visible is False the insertion point will be disabled. The marker is re-enabled either by setting visible to True, by calling XtSetValues, or by executing the display-caret action routine.

Customizing the Text Widget

The remainder of this chapter will describe customizing the Text widget. The Text widget may be customized by subclassing, or by creating new sources and sinks. Subclassing is described in detail in Chapter 7; this section will describe only those things that are specific to the Text widget. Attributes of the Text widget base class and creating new sources and sinks will be discussed.

The Text widget is made up of a number of different pieces, with the Text widget as the base widget class. It and the AsciiText widget are the only true "widgets" in the Text widget family. The other pieces (sources and sinks) are X Toolkit objects and have no window associated with them. No source or sink is useful unless assigned to a Text widget.

Each of the following pieces of the Text widget has a specific purpose, and will be, or has been, discussed in detail in this chapter:

Text

This is the glue that binds everything else together. This widget reads the text data from the source, and displays the information in the sink. All translations and actions are handled in the Text widget itself.

TextSink

This object is responsible for displaying and clearing the drawing area. It also reports the configuration of the window that contains the drawing area. The TextSink does not have its own window; instead it does its drawing on the Text widget's window.

TextSrc

This object is responsible for reading, editing and searching through the text buffer.

AsciiSink

This object is a subclass of the TextSink and knows how to display ASCII text. Support has been added to display any 8-bit character set, given the font.

MultiSink

This object is a subclass of the TextSink and knows how to display font sets.

AsciiSrc

This object is a subclass of the TextSrc and knows how to read strings and files.

MultiSrc

This object is a subclass of the TextSrc and knows how to read strings and multibyte files, converting them to wide characters based on locale.

AsciiText

This widget is a subclass of the Text widget. When created, the AsciiText automatically creates and attaches either an AsciiSrc and AsciiSink, or a MultiSrc and MultiSink, to itself. The AsciiText provides the simplest interface to the Athena Text widgets.

Text Widget

Application Header file     <X11/Xaw/Text.h>
Class Header file           <X11/Xaw/TextP.h>
Class                       textWidgetClass
Class Name                  Text
Superclass                  Simple

The Text widget is the glue that binds all the other pieces together, it maintains the internal state of the displayed text, and acts as a mediator between the source and sink.

This section lists the resources that are actually part of the Text widget, and explains the functionality provided by each.

Resources

When creating a Text widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
autoFillAutoFillBoolean False
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
bottomMarginMarginPosition 2
colormapColormapColormap Parent's Colormap
cursorCursorCursor XC_xterm
cursorNameCursorString NULL
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
displayCaretOutputBoolean True
displayPositionTextPositionXawTextPosition 0
heightHeightDimensionAFont height + margins
insensitiveBorderInsensitivePixmap GreyPixmap
insertPositionTextPositionint 0
leftMarginMarginPosition 2
mappedWhenManagedMappedWhenManagedBoolean True
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
resizeResizeXawTextResizeMode XawtextResizeNever
rightMarginMarginPosition 4
screenScreenPointerRParent's Screen
scrollHorizontalScrollScrollMode XawtextScrollNever
scrollVerticalScrollXawTextScrollMode XawtextScrollNever
selectTypesSelectTypesXawTextSelectType* See above
sensitiveSensitiveBoolean True
textSinkTextSinkWidget NULL
textSourceTextSourceWidget NULL
topMarginMarginPosition 2
translationsTranslationsTranslationTable See above
unrealizeCallbackCallbackXtCallbackList NULL
widthWidthDimension 100
wrapWrapWrapMode XawtextWrapNever
xPositionPosition 0
yPositionPosition 0

TextSink Object



Application Header file	<X11/Xaw/TextSink.h>

Class Header file	<X11/Xaw/TextSinkP.h>

Class		textSinkObjectClass

Class Name	TextSink

Superclass	Object

The TextSink object is the root object for all text sinks. Any new text sink objects should be subclasses of the TextSink Object. The TextSink Class contains all methods that the Text widget expects a text sink to export.

Since all text sinks will have some resources in common, the TextSink defines a few new resources.

Resources

When creating an TextSink object instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
backgroundBackgroundPixel XtDefaultBackground
destroyCallbackCallbackXtCallbackList NULL
foregroundForegroundPixel XtDefaultForeground
_    

Subclassing the TextSink

The only purpose of the TextSink Object is to be subclassed. It contains the minimum set of class methods that all text sinks must have. While all may be inherited, the direct descendant of TextSink must specify some of them as TextSink does contain enough information to be a valid text sink by itself. Do not try to use the TextSink as a valid sink for the Text widget; it is not intended to be used as a sink by itself.

FunctionInherit withPublic Interfacemust specify
DisplayTextXtInheritDisplayTextXawTextSinkDisplayTextyes
InsertCursorXtInheritInsertCursorXawTextSinkInsertCursoryes
ClearToBackgroundXtInheritClearToBackgroundXawTextSinkClearToBackgroundno
FindPositionXtInheritFindPositionXawTextSinkFindPositionyes
FindDistanceXtInheritFindDistanceXawTextSinkFindDistanceyes
ResolveXtInheritResolveXawTextSinkResolveyes
MaxLinesXtInheritMaxLinesXawTextSinkMaxLinesno
MaxHeightXtInheritMaxHeightXawTextSinkMaxHeightno
SetTabsXtInheritSetTabsXawTextSinkSetTabsno
GetCursorBoundsXtInheritGetCursorBoundsXawTextSinkGetCursorBoundsyes

Displaying Text

To display a section of the text buffer contained in the text source use the function DisplayText:

void DisplayText(Widget w, Positionx, y, XawTextPositionpos1, pos2, Boolean highlight);

w

Specifies the TextSink object.

x

Specifies the x location to start drawing the text.

y

Specifies the y location to start drawing text.

pos1

Specifies the location within the text source of the first character to be printed.

pos2

Specifies the location within the text source of the last character to be printed.

highlight

Specifies whether or not to paint the text region highlighted.

The Text widget will only pass one line at a time to the text sink, so this function does not need to know how to line feed the text. It is acceptable for this function to just ignore Carriage Returns. x and y denote the upper left hand corner of the first character to be displayed.

Displaying the Insert Point

The function that controls the display of the text cursor is InsertCursor. This function will be called whenever the text widget desires to change the state of, or move the insert point.

void InsertCursor(Widget w, Positionx, y, XawTextInsertState state);

w

Specifies the TextSink object.

x

Specifies the x location of the cursor in Pixels.

y

Specifies the y location of the cursor in Pixels.

state

Specifies the state of the cursor, may be one of XawisOn or XawisOff.

X and y denote the upper left hand corner of the insert point.

Clearing Portions of the Text window

To clear a portion of the Text window to its background color, the Text widget will call ClearToBackground. The TextSink object already defines this function as calling XClearArea on the region passed. This behavior will be used if you specify XtInheritClearToBackground for this method.

void ClearToBackground(Widget w, Positionx, y, Dimensionwidth, height);

w

Specifies the TextSink object.

x

Specifies the x location, in pixels, of the Region to clear.

y

Specifies the y location, in pixels, of the Region to clear.

width

Specifies the width, in pixels, of the Region to clear.

height

Specifies the height, in pixels, of the Region to clear.

X and y denote the upper left hand corner of region to clear.

Finding a Text Position Given Pixel Values

To find the text character position that will be rendered at a given x location the Text widget uses the function FindPosition:

void FindPosition(Widget w, XawTextPosition fromPos, intfromX, width, Boolean stopAtWordBreak, XawTextPosition *pos_return, int*width_return, *height_return);

w

Specifies the TextSink object.

fromPos

Specifies a reference position, usually the first character in this line. This character is always to the left of the desired character location.

fromX

Specifies the distance that the left edge of fromPos is from the left edge of the window. This is the reference x location for the reference position.

width

Specifies the distance, in pixels, from the reference position to the desired character position.

stopAtWordBreak

Specifies whether or not the position that is returned should be forced to be on a word boundary.

pos_return

Returns the character position that corresponds to the location that has been specified, or the work break immediately to the left of the position if stopAtWordBreak is True.

width_return

Returns the actual distance between fromPos and pos_return.

height_return

Returns the maximum height of the text between fromPos and pos_return.

This function need make no attempt to deal with line feeds. The text widget will only call it one line at a time.

Another means of finding a text position is provided by the Resolve function:

void Resolve(Widget w, XawTextPosition fromPos, intfromX, width, XawTextPosition *pos_return);

w

Specifies the TextSink object.

fromPos

Specifies a reference position, usually the first character in this line. This character is always to the left of the desired character location.

fromX

Specifies the distance that the left edge of fromPos is from the left edge of the window. This is the reference x location for the reference position.

width

Specifies the distance, in pixels, from the reference position to the desired character position.

pos_return

Returns the character position that corresponds to the location that has been specified, or the word break immediately to the left if stopAtWordBreak is True.

This function need make no attempt to deal with line feeds. The text widget will only call it one line at a time. This is a more convenient interface to the FindPosition function, and provides a subset of its functionality.

Finding the Distance Between two Text Positions

To find the distance in pixels between two text positions on the same line use the function FindDistance.

void FindDistance(Widget w, XawTextPositionfromPos, toPos, int fromX, XawTextPosition *pos_return, int*width_return, *height_return);

w

Specifies the TextSink object.

fromPos

Specifies the text buffer position, in characters, of the first position.

fromX

Specifies the distance that the left edge of fromPos is from the left edge of the window. This is the reference x location for the reference position.

toPos

Specifies the text buffer position, in characters, of the second position.

resWidth

Return the actual distance between fromPos and pos_return.

resPos

Returns the character position that corresponds to the actual character position used for toPos in the calculations. This may be different than toPos, for example if fromPos and toPos are on different lines in the file.

height_return

Returns the maximum height of the text between fromPos and pos_return.

This function need make no attempt to deal with line feeds. The Text widget will only call it one line at a time.

Finding the Size of the Drawing area

To find the maximum number of lines that will fit into the current Text widget, use the function MaxLines. The TextSink already defines this function to compute the maximum number of lines by using the height of font.

int MaxLines(Widget w, Dimension height);

w

Specifies the TextSink object.

height

Specifies the height of the current drawing area.

Returns the maximum number of lines that will fit in height.

To find the height required for a given number of text lines, use the function MaxHeight. The TextSink already defines this function to compute the maximum height of the window by using the height of font.

int MaxHeight(Widget w, int lines);

w

Specifies the TextSink object.

height

Specifies the height of the current drawing area.

Returns the height that will be taken up by the number of lines passed.

Setting the Tab Stops

To set the tab stops for a text sink use the SetTabs function. The TextSink already defines this function to set the tab x location in pixels to be the number of characters times the figure width of font.

void SetTabs(Widget w, inttab_count, *tabs);

w

Specifies the TextSink object.

tab_count

Specifies the number of tabs passed in tabs.

tabs

Specifies the position, in characters, of the tab stops.

This function is responsible for the converting character positions passed to it into whatever internal positions the TextSink uses for tab placement.

Getting the Insert Point's Size and Location

To get the size and location of the insert point use the GetCursorBounds function.

void GetCursorBounds(Widget w, XRectangle *rect_return);

w

Specifies the TextSinkObject.

rect_return

Returns the location and size of the insert point.

Rect will be filled with the current size and location of the insert point.

TextSrc Object

Application Header file <X11/Xaw/TextSrc.h>
Class Header file       <X11/Xaw/TextSrcP.h>
Class                   textSrcObjectClass
Class Name              TextSrc
Superclass              Object

The TextSrc object is the root object for all text sources. Any new text source objects should be subclasses of the TextSrc Object. The TextSrc Class contains all methods the Text widget expects a text source to export.

Since all text sources will have some resources in common the TextSrc defines a few new resources.

Resources

When creating an TextSrc object instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
destroyCallbackCallbackXtCallbackList NULL
editTypeEditTypeEditMode NULL

Subclassing the TextSrc

The only purpose of the TextSrc Object is to be subclassed. It contains the minimum set of class methods that all text sources must have. All class methods of the TextSrc must be defined, as the Text widget uses them all. While all may be inherited, the direct descendant of TextSrc must specify some of them as TextSrc does not contain enough information to be a valid text source by itself. Do not try to use the TextSrc as a valid source for the Text widget; it is not intended to be used as a source by itself and bad things will probably happen.

FunctionInherit withPublic Interfacemust specify
ReadXtInheritReadXawTextSourceReadyes
ReplaceXtInheritReplaceXawTextSourceReplaceno
ScanXtInheritScanXawTextSourceScanyes
SearchXtInheritSearchXawTextSourceSearchno
SetSelectionXtInheritSetSelectionXawTextSourceSetSelectionno
ConvertSelectionXtInheritConvertSelectionXawTextSourceConvertSelectionno

Reading Text.

To read the text in a text source use the Read function:

XawTextPosition Read(Widget w, XawTextPosition pos, XawTextBlock *text_return, int length);

w

Specifies the TextSrc object.

pos

Specifies the position of the first character to be read from the text buffer.

text

Returns the text read from the source.

length

Specifies the maximum number of characters the TextSrc should return to the application in text_return.

This function returns the text position immediately after the characters read from the text buffer. The function is not required to read length characters if that many characters are in the file, it may break at any point that is convenient to the internal structure of the source. It may take several calls to Read before the desired portion of the text buffer is fully retrieved.

Replacing Text.

To replace or edit the text in a text buffer use the Replace function:

XawTextPosition Replace(Widget w, XawTextPositionstart, end, XawTextBlock *text);

w

Specifies the TextSrc object.

start

Specifies the position of the first character to be removed from the text buffer. This is also the location to begin inserting the new text.

end

Specifies the position immediately after the last character to be removed from the text buffer.

text

Specifies the text to be added to the text source.

This function can return any of the following values:

XawEditDone

The text replacement was successful.

XawPositionError

The edit mode is XawtextAppend and start is not the last character of the source.

XawEditError

Either the Source was read-only or the range to be deleted is larger than the length of the Source.

The Replace arguments start and end represent the text source character positions for the existing text that is to be replaced by the text in the text block. The characters from start up to but not including end are deleted, and the buffer specified by the text block is inserted in their place. If start and end are equal, no text is deleted and the new text is inserted after start.

Scanning the TextSrc

To search the text source for one of the predefined boundary types use the Scan function:

XawTextPosition Scan(Widget w, XawTextPosition position, XawTextScanType type, XawTextScanDirection dir, int count, Boolean include);

w

Specifies the TextSrc object.

position

Specifies the position to begin scanning the source.

type

Specifies the type of boundary to scan for, may be one of: XawstPosition, XawstWhiteSpace, XawstEOL, XawstParagraph, XawstAll. The exact meaning of these boundaries is left up to the individual text source.

dir

Specifies the direction to scan, may be either XawsdLeft to search backward, or XawsdRight to search forward.

count

Specifies the number of boundaries to scan for.

include

Specifies whether the boundary itself should be included in the scan.

The Scan function returns the position in the text source of the desired boundary. It is expected to return a valid address for all calls made to it, thus if a particular request is made that would take the text widget beyond the end of the source it must return the position of that end.

Searching through a TextSrc

To search for a particular string use the Search function.

XawTextPosition Search(Widget w, XawTextPosition position, XawTextScanDirection dir, XawTextBlock *text);

w

Specifies the TextSrc object.

position

Specifies the position to begin the search.

dir

Specifies the direction to search, may be either XawsdLeft to search backward, or XawsdRight to search forward.

text

Specifies a text block containing the text to search for.

This function will search through the text buffer attempting to find a match for the string in the text block. If a match is found in the direction specified, then the character location of the first character in the string is returned. If no text was found then XawTextSearchError is returned.

Text Selections

While many selection types are handled by the Text widget, text sources may have selection types unknown to the Text widget. When a selection conversion is requested by the X server the Text widget will first call the ConvertSelection function, to attempt the selection conversion.

Boolean ConvertSelections(Widget w, Atom*selection,*target, *type, caddr_t *value_return, unsignedlong *length_return, int *format_return);

w

Specifies the TextSrc object.

selection

Specifies the type of selection that was requested (e.g. PRIMARY).

target

Specifies the type of the selection that has been requested, which indicates the desired information about the selection (e.g. Filename, Text, Window).

type

Specifies a pointer to the atom into which the property type of the converted value of the selection is to be stored. For instance, either file name or text might have property type XA_STRING.

value_return

Returns a pointer into which a pointer to the converted value of the selection is to be stored. The selection owner is responsible for allocating this storage. The memory is considered owned by the toolkit, and is freed by XtFree when the Intrinsics selection mechanism is done with it.

length_return

Returns a pointer into which the number of elements in value is to be stored. The size of each element is determined by format.

format_return

Returns a pointer into which the size in bits of the data elements of the selection value is to be stored.

If this function returns True then the Text widget will assume that the source has taken care of converting the selection, Otherwise the Text widget will attempt to convert the selection itself.

If the source needs to know when the text selection is modified it should define a SetSelection procedure:

void SetSelection(Widget w, XawTextPositionstart, end, Atom selection);

w

Specifies the TextSrc object.

start

Specifies the character position of the beginning of the new text selection.

end

Specifies the character position of the end of the new text selection.

selection

Specifies the type of selection that was requested (e.g. PRIMARY).

Ascii Sink Object and Multi Sink Object



Application Header file	<X11/Xaw/AsciiSink.h>

Class Header file	<X11/Xaw/AsciiSinkP.h>

Class		asciiSinkObjectClass

Class Name	AsciiSink

Superclass	TextSink

The AsciiSink or MultiSink object is used by a text widget to render the text. Depending on its international resource, a AsciiText widget will create one or the other of these when the AsciiText itself is created. Both types are nearly identical; the following discussion applies to both, with MultiSink differences noted only as they occur. The AsciiSink will display all printing characters in an 8 bit font, along with handling Tab and Carriage Return. The name has been left as “AsciiSink” for compatibility. \fIThe MultiSink will display all printing characters in a font set, along with handling Tab and Carriage Return.\fP The source object also reports the text window metrics to the text widgets.

Resources

When creating an AsciiSink object instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
backgroundBackgroundPixel XtDefaultBackground
destroyCallbackCallbackXtCallbackList NULL
displayNonprintingOutputBoolean True
echoOutputBoolean True
fontFontXFontStruct* XtDefaultFont
fontSetFontSetXFontSet XtDefaultFontSet
foregroundForegroundPixel XtDefaultForeground
_    

This resource is retrieved by the AsciiSink instead of being copied from the Text widget.

The text font to use when displaying the string. (This resource is present in the AsciiSink, but not the MultiSink.)

The text font set to use when displaying the string. (This resource is present in the MultiSink, but not the AsciiSink.)

Ascii Source Object and Multi Source Object



Application Header file	<X11/Xaw/AsciiSrc.h> or <X11/Xaw/MultiSrc.h>

Class Header file	<X11/Xaw/AsciiSrcP.h> or  <X11/Xaw/MultiSrcP.h>

Class		asciiSrcObjectClass or multiSrcObjectClass

Class Name	AsciiSrc or MultiSrc

Superclass	TextSource

The AsciiSrc or MultiSrc object is used by a text widget to read the text from a file or string in memory. Depending on its international resource, an AsciiText widget will create one or the other of these when the AsciiText itself is created. Both types are nearly identical; the following discussion applies to both, with MultiSrc differences noted only as they occur.

The AsciiSrc understands all Latin1 characters plus Tab and Carriage Return. \fIThe MultiSrc understands any set of character sets that the underlying X implementation's internationalization handles.\fP

The AsciiSrc can be either of two types: XawAsciiFile or XawAsciiString.

AsciiSrc objects of type XawAsciiFile read the text from a file and store it into an internal buffer. This buffer may then be modified, provided the text widget is in the correct edit mode, just as if it were a source of type XawAsciiString. Unlike R3 and earlier versions of the AsciiSrc, it is now possible to specify an editable disk source. The file is not updated, however, until a call to XawAsciiSave is made. When the source is in this mode the useStringInPlace resource is ignored.

AsciiSrc objects of type XawAsciiString have the text buffer implemented as a string. \fIMultiSrc objects of type XawAsciiString have the text buffer implemented as a wide character string.\fP The string owner is responsible for allocating and managing storage for the string.

In the default case for AsciiSrc objects of type XawAsciiString, the resource useStringInPlace is false, and the widget owns the string. The initial value of the string resource, and any update made by the application programmer to the string resource with XtSetValues, is copied into memory private to the widget, and managed internally by the widget. The application writer does not need to worry about running out of buffer space (subject to the total memory available to the application). The performance does not decay linearly as the buffer grows large, as is necessarily the case when the text buffer is used in place. The application writer must use XtGetValues to determine the contents of the text buffer, which will return a copy of the widget's text buffer as it existed at the time of the XtGetValues call. This copy is not affected by subsequent updates to the text buffer, i.e., it is not updated as the user types input into the text buffer. This copy is freed upon the next call to XtGetValues to retrieve the string resource; however, to conserve memory, there is a convenience routine, XawAsciiSourceFreeString, allowing the application programmer to direct the widget to free the copy.

When the resource useStringInPlace is true and the AsciiSrc object is of type XawAsciiString, the application is the string owner. The widget will take the value of the string resource as its own text buffer, and the length resource indicates the buffer size. In this case the buffer contents change as the user types at the widget; it is not necessary to call XtGetValues on the string resource to determine the contents of the buffer-it will simply return the address of the application's implementation of the text buffer.

Resources

When creating an AsciiSrc object instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
callbackCallbackXtCallbackList NULL
dataCompressionDataCompressionBoolean True
destroyCallbackCallbackCallback NULL
editTypeEditTypeEditMode XawtextRead
lengthLengthIntAlength of string
pieceSizePieceSizeInt BUFSIZ
stringStringString NULL
typeTypeAsciiType XawAsciiString
useStringInPlaceUseStringInPlaceBoolean False
_    

Convenience Routines

The AsciiSrc has a few convenience routines that allow the application programmer quicker or easier access to some of the commonly used functionality of the AsciiSrc.

Conserving Memory

When the AsciiSrc widget is not in useStringInPlace mode space must be allocated whenever the file is saved, or the string is requested with a call to XtGetValues. This memory is allocated on the fly, and remains valid until the next time a string needs to be allocated. You may save memory by freeing this string as soon as you are done with it by calling XawAsciiSourceFreeString.

void XawAsciiSourceFreeString(Widget w);

w

Specifies the AsciiSrc object.

This function will free the memory that contains the string pointer returned by XtGetValues. This will normally happen automatically when the next call to XtGetValues occurs, or when the widget is destroyed.

Saving Files

To save the changes made in the current text source into a file use XawAsciiSave.

Boolean XawAsciiSave(Widget w);

w

Specifies the AsciiSrc object.

XawAsciiSave returns True if the save was successful. It will update the file named in the string resource. If the buffer has not been changed, no action will be taken. This function only works on an AsciiSrc of type XawAsciiFile.

To save the contents of the current text buffer into a named file use XawAsciiSaveAsFile.

Boolean XawAsciiSaveAsFile(Widget w, String name);

w

Specifies the AsciiSrc object.

name

The name of the file to save the current buffer into.

This function returns True if the save was successful. XawAsciiSaveAsFile will work with a buffer of either type XawAsciiString or type XawAsciiFile.

Seeing if the Source has Changed

To find out if the text buffer in an AsciiSrc object has changed since the last time it was saved with XawAsciiSave or queried use XawAsciiSourceChanged.

Boolean XawAsciiSourceChanged(Widget w);

w

Specifies the AsciiSrc object.

This function will return True if the source has changed since the last time it was saved or queried. The internal change flag is reset whenever the string is queried via XtGetValues or the buffer is saved via XawAsciiSave.

Ascii Text Widget



Application Header file	<X11/Xaw/AsciiText.h>

ClassHeader file	<X11/Xaw/AsciiTextP.h>

Class		asciiTextWidgetClass

Class Name	Text

Superclass	Text
Sink Name	textSink
Source Name	textSource

For the ease of internationalization, the AsciiText widget class name has not been changed, although it is actually able to support non-ASCII locales. The AsciiText widget is really a collection of smaller parts. It includes the Text widget itself, a “Source” (which supports memory management), and a “Sink” (which handles the display). There are currently two supported sources, the AsciiSrc and MultiSrc, and two supported sinks, the AsciiSink and MultiSink. Some of the resources listed below are not actually resources of the AsciiText, but belong to the associated source or sink. This is is noted in the explanation of each resource where it applies. When specifying these resources in a resource file it is necessary to use *AsciiText*resource_name instead of *AsciiText.resource_name, since they actually belong to the children of the AsciiText widget, and not the AsciiText widget itself. However, these resources may be set directly on the AsciiText widget at widget creation time, or via XtSetValues.

Resources

When creating an AsciiText widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
autoFillAutoFillBoolean False
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
bottomMarginMarginPosition 2
callbackCallbackXtCallbackList NULL
colormapColormapColormap Parent's Colormap
cursorCursorCursor XC_xterm
cursorNameCursorString NULL
dataCompressionDataCompressionBoolean True
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
displayCaretOutputBoolean True
displayNonprintingOutputBoolean True
displayPositionTextPositionXawTextPosition 0
echoOutputBoolean True
editTypeEditTypeXawTextEditType XawtextRead
fontFontXFontStruct* XtDefaultFont
fontSetFontSetXFontSet XtDefaultFontSet
foregroundForegroundPixel XtDefaultForeground
heightHeightDimensionAFont height + margins
insensitiveBorderInsensitivePixmap GreyPixmap
insertPositionTextPositionint 0
internationalInternationalBooleanCFalse
leftMarginMarginDimension 2
lengthLengthintAlength of string
mappedWhenManagedMappedWhenManagedBoolean True
pieceSizePieceSizeXawTextPosition BUFSIZ
pointerColorForegroundPixel XtDefaultForeground
pointerColorBackgroundBackgroundPixel XtDefaultBackground
resizeResizeXawTextResizeMode XawtextResizeNever
rightMarginMarginPosition 2
screenScreenScreenRParent's Screen
scrollHorizontalScrollXawTextScrollMode XawtextScrollNever
scrollVerticalScrollXawTextScrollMode XawtextScrollNever
selectTypesSelectTypesXawTextSelectType* See above
sensitiveSensitiveBoolean True
stringStringString NULL
textSinkTextSinkWidget An AsciiSink
textSourceTextSourceWidget An AsciiSrc
topMarginMarginPosition 2
translationsTranslationsTranslationTable See above
typeTypeXawAsciiType XawAsciiString
useStringInPlaceUseStringInPlaceBoolean False
widthWidthDimension 100
wrapWrapWrapMode XawtextWrapNever
xPositionPosition 0
yPositionPosition 0

Chapter 6. Composite and Constraint Widgets

These widgets may contain arbitrary widget children. They implement a policy for the size and location of their children.

Box

This widget will pack its children as tightly as possible in non-overlapping rows.

Dialog

An implementation of a commonly used interaction semantic to prompt for auxiliary input from the user, such as a filename.

Form

A more sophisticated layout widget that allows the children to specify their positions relative to the other children, or to the edges of the Form.

Paned

Allows children to be tiled vertically or horizontally. Controls are also provided to allow the user to dynamically resize the individual panes.

Porthole

Allows viewing of a managed child which is as large as, or larger than its parent, typically under control of a Panner widget.

Tree

Provides geometry management of widgets arranged in a directed, acyclic graph.

Viewport

Consists of a frame, one or two scrollbars, and an inner window. The inner window can contain all the data that is to be displayed. This inner window will be clipped by the frame with the scrollbars controlling which section of the inner window is currently visible.

Note

The geometry management semantics provided by the X Toolkit give full control of the size and position of a widget to the parent of that widget. While the children are allowed to request a certain size or location, it is the parent who makes the final decision. Many of the composite widgets here will deny any geometry request from their children by default. If a child widget is not getting the expected size or location, it is most likely the parent disallowing a request, or implementing semantics slightly different than those expected by the application programmer.

If the application wishes to change the size or location of any widget it should make a call to XtSetValues. This will allow the widget to ask its parent for the new size or location. As noted above the parent is allowed to refuse this request, and the child must live with the result. If the application is unable to achieve the desired semantics, then perhaps it should use a different composite widget. Under no circumstances should an application programmer resort to XtMoveWidget or XtResizeWidget; these functions are exclusively for the use of Composite widget implementors.

For more information on geometry management consult the X Toolkit Intrinsics - C Language Interface.

Box Widget




Application Header file	<X11/Xaw/Box.h>

Class Header file	<X11/Xaw/BoxP.h>

Class		boxWidgetClass

Class Name	Box

Superclass	Composite

The Box widget provides geometry management of arbitrary widgets in a box of a specified dimension. The children are rearranged when resizing events occur either on the Box or its children, or when children are managed or unmanaged. The Box widget always attempts to pack its children as tightly as possible within the geometry allowed by its parent.

Box widgets are commonly used to manage a related set of buttons and are often called ButtonBox widgets, but the children are not limited to buttons. The Box's children are arranged on a background that has its own specified dimensions and color.

Resources

When creating a Box widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
childrenReadOnlyWidgetListRNULL
colormapColormapColormap Parent's Colormap
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
heightHeightDimensionAsee Layout Semantics
hSpaceHSpaceDimension 4
mappedWhenManagedMappedWhenManagedBoolean True
numChildrenReadOnlyCardinalR0
orientationOrientationOrientation XtorientVertical
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
vSpaceVSpaceDimension 4
translationsTranslationsTranslationTable NULL
widthWidthDimensionAsee Layout Semantics
xPositionPosition 0
yPositionPosition 0
_    

hSpace

vSpace

The amount of space, in pixels, to leave between the children. This resource specifies the amount of space left between the outermost children and the edge of the box.

orientation

Specifies whether the preferred shape of the box (i.e. the result returned by the query_geometry class method) is tall and narrow XtorientVertical or short and wide XtorientHorizontal. When the Box is a child of a parent which enforces width constraints, it is usually better to specify XtorientVertical (the default). When the parent enforces height constraints, it is usually better to specify XtorientHorizontal.

Layout Semantics

Each time a child is managed or unmanaged, the Box widget will attempt to reposition the remaining children to compact the box. Children are positioned in order left to right, top to bottom. The packing algorithm used depends on the orientation of the Box.

XtorientVertical

When the next child does not fit on the current row, a new row is started. If a child is wider than the width of the box, the box will request a larger width from its parent and will begin the layout process from the beginning if a new width is granted.

XtorientHorizontal

When the next child does not fit on the current row, the Box widens if possible (so as to keep children on a single row); otherwise a new row is started.

After positioning all children, the Box widget attempts to shrink its own size to the minimum dimensions required for the layout.

Dialog Widget




Application Header file	<X11/Xaw/Dialog.h>

Class Header file	<X11/Xaw/DialogP.h>

Class		dialogWidgetClass

Class Name	Dialog

Superclass	Form

The Dialog widget implements a commonly used interaction semantic to prompt for auxiliary input from a user. For example, you can use a Dialog widget when an application requires a small piece of information, such as a filename, from the user. A Dialog widget, which is simply a special case of the Form widget, provides a convenient way to create a preconfigured form.

The typical Dialog widget contains three areas. The first line contains a description of the function of the Dialog widget, for example, the string Filename:. The second line contains an area into which the user types input. The third line can contain buttons that let the user confirm or cancel the Dialog input. Any of these areas may be omitted by the application.

Resources

When creating a Dialog widget instance, the following resources are retrieved from the argument list or the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
childrenReadOnlyWidgetListRNULL
colormapColormapColormap Parent's Colormap
defaultDistanceThicknessint 4
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
heightHeightDimensionAEnough space to contain all children
iconIconBitmap None
labelLabelString "label"
mappedWhenManagedMappedWhenManagedBoolean True
numChildrenReadOnlyCardinalR0
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
valueValueString no value widget
widthWidthDimensionAEnough space to contain all children
xPositionPosition 0
yPositionPosition 0
_    

icon

A pixmap image to be displayed immediately to the left of the Dialog widget's label.

label

A string to be displayed at the top of the Dialog widget.

value

An initial value for the string field that the user will enter text into. By default, no text entry field is available to the user. Specifying an initial value for value activates the text entry field. If string input is desired, but no initial value is to be specified then set this resource to "" (empty string).

Constraint Resources

Each child of the Dialog widget may request special layout resources be applied to it. These constraint resources allow the Dialog widget's children to specify individual layout requirements.

NameClassTypeNotesDefault Value
bottomEdgeXawEdgeType XawRubber
fromHorizWidgetWidget NULL (left edge of Dialog)
fromVertWidgetWidget  NULL (top edge of Dialog)
horizDistanceThicknessint defaultDistance resource
leftEdgeXawEdgeType XawRubber
resizableBooleanBoolean FALSE
rightEdgeXawEdgeType XawRubber
topEdgeXawEdgeType XawRubber
vertDistanceThicknessint defaultDistance resource

bottom
left
right
top            What to do with this edge of the child when
               the parent is resized.  This resource may be
               any edgeType.  See Layout Semantics for
               details.

fromHoriz
fromVert       Which widget this child should be placed
               underneath (or to the right of).  If a value
               of NULL is specified then this widget will be
               positioned relative to the edge of the par-
               ent.

horizDistance
vertDistance   The amount of space, in pixels, between this
               child and its left or upper neighbor.

resizable      If this resource is False then the parent
               widget will ignore all geometry request made
               by this child.  The parent may still resize
               this child itself, however.

Layout Semantics

The Dialog widget uses two different sets of layout seman- tics. One is used when initially laying out the children. The other is used when the Dialog is resized.

The first layout method uses the fromVert mand fromHoriz resources to place the children of the Dialog. A single pass is made through the Dialog widget's children in the order that they were created. Each child is then placed in the Dialog widget below or to the right of the widget speci- fied by the fromVert mand fromHoriz mresources. The distance the new child is placed from its left or upper neighbor is determined by the horizDistance mand vertDistance mresources. This implies some things about how the order of creation affects the possible placement of the children. The Form widget registers a string to widget converter which does not postpone conversion and does not cache conversion results.

The second layout method is used when the Dialog is resized. It does not matter what causes this resize, and it is possi- ble for a resize to happen before the widget becomes visible (due to constraints imposed by the parent of the Dialog). This layout method uses the bottom , top , left , and right resources. These resources are used to determine what will happen to each edge of the child when the Dialog is resized. If a value of XawChain <something> is specified, the the edge of the child will remain a fixed distance from the chain edge of the Dialog. For example if XawChainLeft mis specified for the right mresource of a child then the right edge of that child will remain a fixed distance from the left edge of the Dialog widget. If a value of XawRubber mis spec- ified, that edge will grow by the same percentage that the Dialog grew. For instance if the Dialog grows by 50% the left edge of the child (if specified as XawRubber mwill be 50% farther from the left edge of the Dialog). One must be very careful when specifying these resources, for when they are specified incorrectly children may overlap or completely occlude other children when the Dialog widget is resized.

Edge TypeResource NameDescription
XawChainBottomChainBottomEdge remains a fixed distance from bottom of Dialog
XawChainLeftChainLeftEdge remains a fixed distance from left of Dialog
XawChainRightChainRightEdge remains a fixed distance from right of Dialog
XawChainTopChainTopEdge remains a fixed distance from top of Dialog
XawRubberRubberEdges will move a proportional distance

Example

If you wish to force the Dialog to never resize one or more of its children then set left and right to XawChainLeft and top and bottom to XawChainTop. This will cause the child to remain a fixed distance from the top and left edges of the Dialog, and to never resize.

Special Considerations

The Dialog widget automatically sets the top and bottom resources for all Children that are subclasses of the Command widget, as well as the widget children that are used to contain the label, value, and icon. This policy allows the buttons at the bottom of the Dialog to interact correctly with the predefined children, and makes it possible for a client to simply create and manage a new Command button without having to specify its constraints.

The Dialog will also set fromLeft to the last button in the Dialog for each new button added to the Dialog widget.

The automatically added constraints cannot be overridden, as they are policy decisions of the Dialog widget. If a more flexible Dialog is desired, the application is free to use the Form widget to create its own Dialog policy.

Automatically Created Children.

The Dialog uses Label widgets to contain the label and icon. These widgets are named label and icon respectively. The Dialog value is contained in an AsciiText widget whose name is value. Using XtNameToWidget the application can change those resources associated with each of these widgets that are not available through the Dialog widget itself.

Convenience Routines

To return the character string in the text field, use

String XawDialogGetValueString(Widget w);

w

Specifies the Dialog widget.

This function returns a copy of the value string of the Dialog widget. This string is allocated by the AsciiText widget and will remain valid and unchanged until another call to XawDialogGetValueString or an XtGetValues call on the value widget, when the string will be automatically freed, and a new string is returned. This string may be freed earlier by calling the function XawAsciiSourceFreeString.

To add a new button to the Dialog widget use XawDialogAddButton.

void XawDialogAddButton(Widget w, String name, XtCallbackProc func, XtPointer client_data);

w

Specifies the Dialog widget.

name

Specifies the name of the new Command button to be added to the Dialog.

func

Specifies a callback function to be called when this button is activated. If NULL is specified then no callback is added.

client_data

Specifies the client_data to be passed to the func.

This function is merely a shorthand for the code sequence:




{
	Widget button = XtCreateManagedWidget(name, commandWidgetClass, w, NULL, ZERO);
	XtAddCallback(button, XtNcallback, func, client_data);
}

Form Widget




Application Header file	<X11/Xaw/Form.h>

Class Header file	<X11/Xaw/FormP.h>

Class		formWidgetClass

Class Name	Form

Superclass	Constraint

The Form widget can contain an arbitrary number of children or subwidgets. The Form provides geometry management for its children, which allows individual control of the position of each child. Any combination of children can be added to a Form. The initial positions of the children may be computed relative to the positions of previously created children. When the Form is resized, it computes new positions and sizes for its children. This computation is based upon information provided when a child is added to the Form.

The default width of the Form is the minimum width needed to enclose the children after computing their initial layout, with a margin of defaultDistance at the right and bottom edges. If a width and height is assigned to the Form that is too small for the layout, the children will be clipped by the right and bottom edges of the Form.

Resources

When creating a Form widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
childrenReadOnlyWidgetListRNULL
colormapColormapColormap Parent's Colormap
defaultDistanceThicknessint 4
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
heightHeightDimensionAEnough space to contain all children
mappedWhenManagedMappedWhenManagedBoolean True
numChildrenReadOnlyCardinalR0
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
widthWidthDimensionAEnough space to contain all children
xPositionPosition 0
yPositionPosition 0
_    

Constraint Resources

Each child of the Form widget may request special layout resources be applied to it. These constraint resources allow the Form widget's children to specify individual layout requirements.

NameClassTypeNotesDefault Value
bottomEdgeXawEdgeType XawRubber
fromHorizWidgetWidget NULL (left edge of Form)
fromVertWidgetWidget  NULL (top edge of Form)
horizDistanceThicknessint defaultDistance resource
leftEdgeXawEdgeType XawRubber
resizableBooleanBoolean FALSE
rightEdgeXawEdgeType XawRubber
topEdgeXawEdgeType XawRubber
vertDistanceThicknessint defaultDistance resource

bottom
left
right
top            What to do with this edge of the child when
               the parent is resized.  This resource may be
               any edgeType.  See Layout Semantics for
               details.

fromHoriz
fromVert       Which widget this child should be placed
               underneath (or to the right of).  If a value
               of NULL is specified then this widget will be
               positioned relative to the edge of the par-
               ent.

horizDistance
vertDistance   The amount of space, in pixels, between this
               child and its left or upper neighbor.

resizable      If this resource is False then the parent
               widget will ignore all geometry request made
               by this child.  The parent may still resize
               this child itself, however.

Layout Semantics

The Form widget uses two different sets of layout semantics. One is used when initially laying out the children. The other is used when the Form is resized.

The first layout method uses the fromVert and fromHoriz resources to place the children of the Form. A single pass is made through the Form widget's children in the order that they were created. Each child is then placed in the Form widget below or to the right of the widget specified by the fromVert and fromHoriz resources. The distance the new child is placed from its left or upper neighbor is deter- mined by the horizDistance and vertDistance resources. This implies some things about how the order of creation affects the possible placement of the children. The Form widget registers a string to widget converter which does not post- pone conversion and does not cache conversion results.

The second layout method is used when the Form is resized. It does not matter what causes this resize, and it is possi- ble for a resize to happen before the widget becomes visible (due to constraints imposed by the parent of the Form). This layout method uses the bottom, top, left, and right resources. These resources are used to determine what will happen to each edge of the child when the Form is resized. If a value of XawChain <something> is specified, the the edge of the child will remain a fixed distance from the chain edge of the Form. For example if XawChainLeft is specified for the right resource of a child then the right edge of that child will remain a fixed distance from the left edge of the Form widget. If a value of XawRubber is specified, that edge will grow by the same percentage that the Form grew. For instance if the Form grows by 50% the left edge of the child (if specified as XawRubber will be 50% farther from the left edge of the Form). One must be very careful when specifying these resources, for when they are specified incorrectly children may overlap or completely occlude other children when the Form widget is resized.

Edge TypeResource NameDescription
XawChainBottomChainBottomEdge remains a fixed distance from bottom of Form
XawChainLeftChainLeftEdge remains a fixed distance from left of Form
XawChainRightChainRightEdge remains a fixed distance from right of Form
XawChainTopChainTopEdge remains a fixed distance from top of Form
XawRubberRubberEdges will move a proportional distance

Example

If you wish to force the Form to never resize one or more of its children, then set left and right to XawChainLeft and top and bottom to XawChainTop. This will cause the child to remain a fixed distance from the top and left edges of the Form, and never to resize.

Convenience Routines

To force or defer a re-layout of the Form, use

void XawFormDoLayout(Widget w, Boolean do_layout);

w

Specifies the Form widget.

do_layout

Specifies whether the layout of the Form widget is enabled (True) or disabled (False).

When making several changes to the children of a Form widget after the Form has been realized, it is a good idea to disable relayout until after all changes have been made.

Paned Widget




Application Header file	<X11/Xaw/Paned.h>

Class Header file	<X11/Xaw/PanedP.h>

Class		panedWidgetClass

Class Name	Paned

Superclass	Constraint

The Paned widget manages children in a vertically or horizontally tiled fashion. The panes may be dynamically resized by the user by using the grips that appear near the right or bottom edge of the border between two panes.

The Paned widget may accept any widget class as a pane except Grip. Grip widgets have a special meaning for the Paned widget, and adding a Grip as its own pane will confuse the Paned widget.

Using the Paned Widget

The grips allow the panes to be resized by the user. The semantics of how these panes resize is somewhat complicated, and warrants further explanation here. When the mouse pointer is positioned on a grip and pressed, an arrow is displayed that indicates the pane that is to be to be resized. While keeping the mouse button down, the user can move the grip up and down (or left and right). This, in turn, changes the size of the pane. The size of the Paned widget will not change. Instead, it chooses another pane (or panes) to resize. For more details on which pane it chooses to resize, see Layout Semantics.

One pointer binding allows the border between two panes to be moved, without affecting any of the other panes. When this occurs the pointer will change to an arrow that points along the pane border.

The default bindings for the Paned widget's grips are:

Mouse buttonPane to Resize - VerticalPane to Resize - Horizontal
1 (left)above the gripleft of the grip
2 (middle)adjust borderadjust border
3 (right)below the gripright of the grip
_  

Resources

When creating a Paned widget instance, the following resources are retrieved from the argument list or the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
betweenCursorCursorCursorADepends on orientation
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
childrenReadOnlyWidgetListRNULL
colormapColormapColormap Parent's Colormap
cursorCursorCursor None
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
gripCursorCursorCursorADepends on orientation
gripIndentGripIndentPosition 10
gripTranslationsTranslationsTranslationTable see below
heightHeightDimensionADepends on orientation
horizontalBetweenCursorCursorCursor sb_up_arrow
horizontalGripCursorCursorCursor sb_h_double_arrow
internalBorderColorBorderColorPixel XtDefaultForeground
internalBorderWidthBorderWidthDimension 1
leftCursorCursorCursor sb_left_arrow
lowerCursorCursorCursor sb_down_arrow
mappedWhenManagedMappedWhenManagedBoolean True
numChildrenReadOnlyCardinalR0
orientationOrientationOrientation XtorientVertical
refigureModeBooleanBoolean True
rightCursorCursorCursor sb_right_arrow
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
upperCursorCursorCursor sb_up_arrow
verticalBetweenCursorCursorCursor sb_left_arrow
verticalGripCursorCursorCursor sb_v_double_arrow
widthWidthDimensionADepends on orientation
xPanedPosition 0
yPanedPosition 0
_    

cursor

The cursor to use when the mouse pointer is over the Paned widget, but not in any of its children (children may also inherit this cursor). It should be noted that the internal borders are actually part of the Paned widget, not the children.

gripCursor

The cursor to use when the grips are not active. The default value is verticalGripCursor or horizontalGripCursor depending on the orientation of the Paned widget.

gripIndent

The amount of space left between the right (or bottom) edge of the Paned widget and all the grips.

gripTranslation

Translation table that will be applied to all grips.

horizontalBetweenCursor

verticalBetweenCursor

The cursor to be used for the grip when changing the boundary between two panes. These resources allow the cursors to be different depending on the orientation of the Paned widget.

horizontalGripCursor

verticalGripCursor

The cursor to be used for the grips when they are not active. These resources allow the cursors to be different depending on the orientation of the Paned widget.

internalBorderColor

A pixel value which indexes the widget's colormap to derive the internal border color of the widget's window. The class name of this resource allows Paned*BorderColor: blue to set the internal border color for the Paned widget. An optimization is invoked if internalBorderColor and background are the same, and the internal borders are not drawn. internalBorderWidth is still left between the panes, however.

internalBorderWidth

The width of the internal borders. This is the amount of space left between the panes. The class name of this resource allows Paned*BorderWidth: 3 to set the internal border width for the Paned widget.

leftCursor

rightCursor

The cursor used to indicate which is the important pane to resize when the Paned widget is oriented horizontally.

lowerCursor

upperCursor

The cursor used to indicate which is the important pane to resize when the Paned widget is oriented vertically. This is not the same as the number of panes, since this also contains a grip for some of the panes, use XawPanedGetNumSub to retrieve the number of panes.

orientation

The orientation to stack the panes. This value can be either XtorientVertical or XtorientHorizontal.

refigureMode

This resource allows pane layout to be suspended. If this value is False, then no layout actions will be taken. This may improve efficiency when adding or removing more than one pane from the Paned widget.

Constraint Resources

Each child of the Paned widget may request special layout resources be applied to it. These constraint resources allow the Paned widget's children to specify individual layout requirements.

NameClassTypeNotesDefault Value
allowResizeBooleanBoolean False
maxMaxDimension Infinity
minMinDimension Height of Grips
preferredPaneSizePreferredPaneSizeDimension ask child
resizeToPreferredBooleanBoolean False
showGripShowGripBoolean True
skipAdjustBooleanBoolean False
_    

allowResize

If this value is False the the Paned widget will disallow all geometry requests from this child.

max

min

The absolute maximum or minimum size for this pane. These values will never be overridden by the Paned widget. This may cause some panes to be pushed off the bottom (or right) edge of the paned widget.

preferredPaneSize

Normally the paned widget makes a QueryGeometry call on a child to determine the preferred size of the child's pane. There are times when the application programmer or the user has a better idea of the preferred size of a pane. Setting this resource causes the value passed to be interpreted as the preferred size, in pixels, of this pane.

resizeToPreferred

Determines whether or not to resize each pane to its preferred size when the Paned widget is resized. See Layout Semantics for details.

showGrip

If True then a grip will be shown for this pane. The grip associated with a pane is either below or to the right of the pane. No grip is ever shown for the last pane.

skipAdjust

This resource is used to determine which pane is forced to be resized. Setting this value to True makes this pane less likely to be forced to be resized. See Layout Semantics for details.

Layout Semantics

In order to make effective use of the Paned widget it is helpful to know the rules it uses to determine which child will be resized in any given situation. There are three rules used to determine which child is resized. While these rules are always the same, the panes that are searched can change depending upon what caused the relayout.

Layout Rules

1

Do not let a pane grow larger than its max or smaller than its min.

2

Do not adjust panes with skipAdjust set.

3

Do not adjust panes away from their preferred size, although moving one closer to its preferred size is fine.

When searching the children the Paned widget looks for panes that satisfy all the rules, and if unsuccessful then it eliminates rule 3 and then 2. Rule 1 is always enforced.

If the relayout is due to a resize or change in management then the panes are searched from bottom to top. If the relayout is due to grip movement then they are searched from the grip selected in the direction opposite the pane selected.

Resizing Panes from a Grip Action

The pane above the grip is resized by invoking the GripAction with UpLeftPane specified. The panes below the grip are each checked against all rules, then rules 2 and 1 and finally against rule 1 only. No pane above the chosen pane will ever be resized.

The pane below the grip is resized by invoking the GripAction with LowRightPane specified. The panes above the grip are each checked in this case. No pane below the chosen pane will ever be resized.

Invoking GripAction with ThisBorderOnly specified just moves the border between the panes. No other panes are ever resized.

Resizing Panes after the Paned widget is resized.

When the Pane widget is resized it must determine a new size for each pane. There are two methods of doing this. The Paned widget can either give each pane its preferred size and then resize the panes to fit, or it can use the current sizes and then resize the panes to fit. The resizeToPreferred resource allows the application to tell the Paned widget whether to query the child about its preferred size (subject to the the preferredPaneSize) or to use the current size when refiguring the pane locations after the pane has been resized.

There is one special case. All panes assume they should resize to their preferred size until the Paned widget becomes visible to the user.

Managing Children and Geometry Management

The Paned widget always resizes its children to their preferred sizes when a new child is managed, or a geometry management request is honored. The Paned widget will first attempt to resize itself to contain its panes exactly. If this is not possible then it will hunt through the children, from bottom to top (right to left), for a pane to resize.

Special Considerations

When a user resizes a pane with the grips, the Paned widget assumes that this new size is the preferred size of the pane.

Grip Translations

The Paned widget has no action routines of its own, as all actions are handled through the grips. The grips are each assigned a default Translation table.



	<Btn1Down>:	GripAction(Start, UpLeftPane)

	<Btn2Down>:	GripAction(Start, ThisBorderOnly)
	<Btn3Down>:	GripAction(Start, LowRightPane)
	<Btn1Motion>:	GripAction(Move, UpLeftPane)
	<Btn2Motion>:	GripAction(Move, ThisBorderOnly)
	<Btn3Motion>:	GripAction(Move, LowRightPane)
	Any<BtnUp>:	GripAction(Commit)

The Paned widget interprets the GripAction as taking two arguments. The first argument may be any of the following:

Start

Sets up the Paned widget for resizing and changes the cursor of the grip. The second argument determines which pane will be resized, and can take on any of the three values shown above.

Move

The internal borders are drawn over the current pane locations to animate where the borders would actually be placed if you were to move this border as shown. The second argument must match the second argument that was passed to the Start action, that began this process. If these arguments are not passed, the behavior is undefined.

Commit

This argument causes the Paned widget to commit the changes selected by the previously started action. The cursor is changed back to the grip's inactive cursor. No second argument is needed in this case.

Convenience Routines

To enable or disable a child's request for pane resizing, use XawPanedAllowResize :

void XawPanedAllowResize(Widget w, Boolean allow_resize);

w

Specifies the child pane.

allow_resize

Specifies whether or not resizing requests for this child will be granted by the Paned widget.

If allow_resize is True, the Paned widget allows geometry requests from the child to change the pane's height. If allow_resize is False, the Paned widget ignores geometry requests from the child to change the pane's height. The default state is True before the Pane is realized and False after it is realized. This procedure is equivalent to changing the allowResize constraint resource for the child.

To change the minimum and maximum height settings for a pane, use XawPanedSetMinMax :

void XawPanedSetMinMax(Widget w, intmin, max);

w

Specifies the child pane.

min

Specifies the new minimum height of the child, expressed in pixels.

max

Specifies new maximum height of the child, expressed in pixels.

This procedure is equivalent to setting the min and max constraint resources for the child.

To retrieve the minimum and maximum height settings for a pane, use XawPanedGetMinMax :

void XawPanedGetMinMax(Widget w, int*min_return, *max_return);

w

Specifies the child pane.

min_return

Returns the minimum height of the child, expressed in pixels.

max_return

Returns the maximum height of the child, expressed in pixels.

This procedure is equivalent to getting the min and max resources for this child child.

To enable or disable automatic recalculation of pane sizes and positions, use XawPanedSetRefigureMode :

void XawPanedSetRefigureMode(Widget w, Boolean mode);

w

Specifies the Paned widget.

mode

Specifies whether the layout of the Paned widget is enabled (True) or disabled (False).

When making several changes to the children of a Paned widget after the Paned has been realized, it is a good idea to disable relayout until after all changes have been made.

To retrieve the number of panes in a paned widget use XawPanedGetNumSub:

int XawPanedGetNumSub(Widget w);

w

Specifies the Paned widget.

This function returns the number of panes in the Paned widget. This is not the same as the number of children, since the grips are also children of the Paned widget.

Porthole Widget




Application Header file	<X11/Xaw/Porthole.h>

Class Header file	<X11/Xaw/PortholeP.h>

Class		portholeWidgetClass

Class Name	Porthole

Superclass	Composite

The Porthole widget provides geometry management of a list of arbitrary widgets, only one of which may be managed at any particular time. The managed child widget is reparented within the porthole and is moved around by the application (typically under the control of a Panner widget).

Resources

When creating a Porthole widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
childrenReadOnlyWidgetListRNULL
colormapColormapColormap Parent's Colormap
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
heightHeightDimensionAsee Layout Semantics
mappedWhenManagedMappedWhenManagedBoolean True
numChildrenReadOnlyCardinalR0
reportCallbackReportCallbackCallback NULL
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
widthWidthDimensionAsee Layout Semantics
xPositionPosition 0
yPositionPosition 0
_    

reportCallback

A list of functions to invoke whenever the managed child widget changes size or position.

Layout Semantics

The Porthole widget allows its managed child to request any size that is as large or larger than the Porthole itself and any location so long as the child still obscures all of the Porthole. This widget typically is used with a Panner widget.

Porthole Callbacks

The functions registered on the reportCallback list are invoked whenever the managed child changes size or position:

void ReportProc(Widget porthole, XtPointer client_data, XtPointer report);

porthole

Specifies the Porthole widget.

client_data

Specifies the client data.

report

Specifies a pointer to an XawPannerReport structure containing the location and size of the slider and the size of the canvas.

Tree Widget

Application Header file	<X11/Xaw/Tree.h>
Class Header file	<X11/Xaw/TreeP.h>
Class		treeWidgetClass
Class Name	Tree
Superclass	Constraint

The Tree widget provides geometry management of arbitrary widgets arranged in a directed, acyclic graph (i.e., a tree). The hierarchy is constructed by attaching a constraint resource called treeParent to each widget indicating which other node in the tree should be treated as the widget's superior. The structure of the tree is shown by laying out the nodes in the standard format for tree diagrams with lines drawn connecting each node with its children.

The Tree sizes itself according to the needs of its children and is not intended to be resized by its parent. Instead, it should be placed inside another composite widget (such as the Porthole or Viewport) that can be used to scroll around in the tree.

Resources

When creating a Tree widget instance, the following resources are retrieved from the argument list or from the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
ancestorSensitiveAncestorSensitiveBooleanDTrue
autoReconfigureAutoReconfigureBoolean False
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
childrenReadOnlyWidgetListRNULL
colormapColormapColormap Parent's Colormap
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
foregroundForegroundPixel XtDefaultForeground
gravityGravityXtGravity WestGravity
heightHeightDimensionAsee Layout Semantics
hSpaceHSpaceDimension 4
lineWidthLineWidthDimension 0
mappedWhenManagedMappedWhenManagedBoolean True
numChildrenReadOnlyCardinalR0
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
vSpaceVSpaceDimension 4
translationsTranslationsTranslationTable NULL
widthWidthDimensionAsee Layout Semantics
xPositionPosition 0
yPositionPosition 0

autoReconfigure

Whether or not to layout the tree every time a node is added or removed.

gravity

Specifies the side of the widget from which the tree should grow. Valid values include WestGravity, NorthGravity, EastGravity, and SouthGravity.

hSpace

vSpace

The amount of space, in pixels, to leave between the children. This resource specifies the amount of space left between the outermost children and the edge of the box.

lineWidth

The width of the lines from nodes that do not have a treeGC constraint resource to their children.

Constraint Resources

Each child of the Tree widget must specify its superior node in the tree. In addition, it may specify a GC to use when drawing a line between it and its inferior nodes.

NameClassTypeNotesDefault Value
treeGCTreeGCGC NULL
treeParentTreeParentWidget NULL

treeGC

This specifies the GC to use when drawing lines between this widget and its inferiors in the tree. If this resource is not specified, the Tree's foreground and lineWidth will be used.

treeParent

This specifies the superior node in the tree for this widget. The default is for the node to have no superior (and to therefore be at the top of the tree).

Layout Semantics

Each time a child is managed or unmanaged, the Tree widget will attempt to reposition the remaining children to fix the shape of the tree if the resource is set. Children at the top (most superior) of the tree are drawn at the side specified by the resource.

After positioning all children, the Tree widget attempts to shrink its own size to the minimum dimensions required for the layout.

Convenience Routines

The most efficient way to layout a tree is to set autoReconfigure to False and then use the XawTreeForceLayout routine to arrange the children.

void XawTreeForceLayout(Widget w);

w

Specifies the Tree widget.

Viewport Widget




Application Header file	<X11/Xaw/Viewport.h>

Class Header file	<X11/Xaw/ViewportP.h>

Class		viewportWidgetClass

Class Name	Viewport

Superclass	Form

The Viewport widget consists of a frame window, one or two Scrollbars, and an inner window. The size of the frame window is determined by the viewing size of the data that is to be displayed and the dimensions to which the Viewport is created. The inner window is the full size of the data that is to be displayed and is clipped by the frame window. The Viewport widget controls the scrolling of the data directly. No application callbacks are required for scrolling.

When the geometry of the frame window is equal in size to the inner window, or when the data does not require scrolling, the Viewport widget automatically removes any scrollbars. The forceBars option causes the Viewport widget to display all scrollbars permanently.

Resources

When creating a Viewport widget instance, the following resources are retrieved from the argument list or the resource database:

NameClassTypeNotesDefault Value
acceleratorsAcceleratorsAcceleratorTable NULL
allowHorizBooleanBoolean False
allowVertBooleanBoolean False
ancestorSensitiveAncestorSensitiveBooleanDTrue
backgroundBackgroundPixel XtDefaultBackground
backgroundPixmapPixmapPixmap XtUnspecifiedPixmap
borderColorBorderColorPixel XtDefaultForeground
borderPixmapPixmapPixmap XtUnspecifiedPixmap
borderWidthBorderWidthDimension 1
childrenReadOnlyWidgetListRNULL
colormapColormapColormap Parent's Colormap
depthDepthintCParent's Depth
destroyCallbackCallbackXtCallbackList NULL
forceBarsBooleanBoolean False
heightHeightDimension height of the child
mappedWhenManagedMappedWhenManagedBoolean True
numChildrenReadOnlyCardinalR0
reportCallbackReportCallbackXtCallbackList NULL
screenScreenScreenRParent's Screen
sensitiveSensitiveBoolean True
translationsTranslationsTranslationTable NULL
useBottomBooleanBoolean False
useRightBooleanBoolean False
widthWidthDimension width of the child
xPositionPosition 0
yPositionPosition 0
_    

allowHoriz

allowVert

If these resources are False then the Viewport will never create a scrollbar in this direction. If it is True then the scrollbar will only appear when it is needed, unless forceBars is True.

forceBars

When True the scrollbars that have been allowed will always be visible on the screen. If False the scrollbars will be visible only when the inner window is larger than the frame.

reportCallback

These callbacks will be executed whenever the Viewport adjusts the viewed area of the child. The call_data parameter is a pointer to an XawPannerReport structure.

useBottom

useRight

By default the scrollbars appear on the left and top of the screen. These resources allow the vertical scrollbar to be placed on the right edge of the Viewport, and the horizontal scrollbar on the bottom edge of the Viewport.

Layout Semantics

The Viewport widget manages a single child widget. When the size of the child is larger than the size of the Viewport, the user can interactively move the child within the Viewport by repositioning the scrollbars.

The default size of the Viewport before it is realized is the width and/or height of the child. After it is realized, the Viewport will allow its child to grow vertically or horizontally if allowVert or allowHoriz are set, respectively. If the corresponding vertical or horizontal scrollbar is not enabled, the Viewport will propagate the geometry request to its own parent and the child will be allowed to change size only if the Viewport's parent allows it. Regardless of whether or not scrollbars are enabled in the corresponding direction, if the child requests a new size smaller than the Viewport size, the change will be allowed only if the parent of the Viewport allows the Viewport to shrink to the appropriate dimension.

The scrollbar children of the Viewport are named horizontal and vertical. By using these names the programmer can specify resources for the individual scrollbars. XtSetValues can be used to modify the resources dynamically once the widget ID has been obtained with XtNameToWidget.

Note

Although the Viewport is a Subclass of the Form, no resources for the Form may be supplied for any of the children of the Viewport. These constraints are managed internally and are not meant for public consumption.

Chapter 7. Creating New Widgets (Subclassing)

Although the task of creating a new widget may at first appear a little daunting, there is a basic simple pattern that all widgets follow. The Athena Widget library contains a special widget called the Template widget that is intended to assist the novice widget programmer in writing a custom widget.

Reasons for wishing to write a custom widget include:

  • Providing a graphical interface not currently supported by any existing widget set.

  • Convenient access to resource management procedures to obtain fonts, colors, etc., even if user customization is not desired.

  • Convenient access to user input dispatch and translation management procedures.

  • Access to callback mechanism for building higher-level application libraries.

  • Customizing the interface or behavior of an existing widget to suit a special application need.

  • Desire to allow user customization of resources such as fonts, colors, etc., or to allow convenient re-binding of keys and buttons to internal functions.

  • Converting a non-Toolkit application to use the Toolkit.

In each of these cases, the operation needed to create a new widget is to "subclass" an existing one. If the desired semantics of the new widget are similar to an existing one, then the implementation of the existing widget should be examined to see how much work would be required to create a subclass that will then be able to share the existing class methods. Much time will be saved in writing the new widget if an existing widget class Expose, Resize and/or GeometryManager method can be used by the subclass.

Note that some trivial uses of a “bare-bones” widget may be achieved by simply creating an instance of the Core widget. The class variable to use when creating a Core widget is widgetClass. The geometry of the Core widget is determined entirely by the parent widget.

It is very often the case than an application will have a special need for a certain set of functions and that many copies of these functions will be needed. For example, when converting an older application to use the Toolkit, it may be desirable to have a "Window Widget" class that might have the following semantics:

  • Allocate 2 drawing colors in addition to a background color.

  • Allocate a text font.

  • Execute an application-supplied function to handle exposure events.

  • Execute an application-supplied function to handle user input events.

It is obvious that a completely general-purpose WindowWidgetClass could be constructed that would export all class methods as callbacks lists, but such a widget would be very large and would have to choose some arbitrary number of resources such as colors to allocate. An application that used many instances of the general-purpose widget would therefore un-necessarily waste many resources.

In this section, an outline will be given of the procedure to follow to construct a special-purpose widget to address the items listed above. The reader should refer to the appropriate sections of the X Toolkit Intrinsics - C Language Interface for complete details of the material outlined here. Section 1.4 of the Intrinsics should be read in conjunction with this section.

All Athena widgets have three separate files associated with them:

  • A "public" header file containing declarations needed by applications programmers

  • A "private" header file containing additional declarations needed by the widget and any subclasses

  • A source code file containing the implementation of the widget

This separation of functions into three files is suggested for all widgets, but nothing in the Toolkit actually requires this format. In particular, a private widget created for a single application may easily combine the "public" and "private" header files into a single file, or merge the contents into another application header file. Similarly, the widget implementation can be merged into other application code.

In the following example, the public header file < X11/Xaw/Template.h >, the private header file < X11/Xaw/TemplateP.h > and the source code file < X11/Xaw/Template.c > will be modified to produce the "WindowWidget" described above. In each case, the files have been designed so that a global string replacement of "Template" and "template" with the name of your new widget, using the appropriate case, can be done.

Public Header File

The public header file contains declarations that will be required by any application module that needs to refer to the widget; whether to create an instance of the class, to perform an XtSetValues operation, or to call a public routine implemented by the widget class.

The contents of the Template public header file, < X11/Xaw/Template.h >, are:

..


/* Copyright (c) X Consortium 1987, 1988 */

#ifndef _Template_h
#define _Template_h

/****************************************************************
 *
 * Template widget
 *
 ****************************************************************/

/* Resources:

 Name	Class		RepType	Default Value
 ----		-----		-------	-------------
 background	Background		Pixel	XtDefaultBackground
 border	BorderColor		Pixel	XtDefaultForeground
 borderWidth	BorderWidth		Dimension	1
 destroyCallback	Callback		Pointer	NULL
 height	Height		Dimension	0
 mappedWhenManaged	MappedWhenManaged	Boolean	True
 sensitive	Sensitive		Boolean	True
 width	Width		Dimension	0
 x		Position		Position	0
 y		Position		Position	0

*/

/* define any special resource names here that are not in <X11/StringDefs.h> */

#define XtNtemplateResource "templateResource"

#define XtCTemplateResource "TemplateResource"

/* declare specific TemplateWidget class and instance datatypes */

typedef struct _TemplateClassRec*	TemplateWidgetClass;
typedef struct _TemplateRec*	TemplateWidget;

/* declare the class constant */

extern WidgetClass templateWidgetClass;

#endif /* _Template_h */

You will notice that most of this file is documentation. The crucial parts are the last 8 lines where macros for any private resource names and classes are defined and where the widget class datatypes and class record pointer are declared.

For the "WindowWidget", we want 2 drawing colors, a callback list for user input and an exposeCallback callback list, and we will declare three convenience procedures, so we need to add




/* Resources:
	...
 callback	Callback	Callback	NULL
 drawingColor1	Color	Pixel		XtDefaultForeground
 drawingColor2	Color	Pixel		XtDefaultForeground
 exposeCallback	Callback	Callback	NULL
 font		Font	XFontStruct*	XtDefaultFont
	...
 */

#define XtNdrawingColor1 "drawingColor1"
#define XtNdrawingColor2 "drawingColor2"
#define XtNexposeCallback "exposeCallback"

extern Pixel WindowColor1(\|/* Widget */\|);
extern Pixel WindowColor2(\|/* Widget */\|);
extern Font\ \ WindowFont(\|/* Widget */\|);

Note that we have chosen to call the input callback list by the generic name, callback, rather than a specific name. If widgets that define a single user-input action all choose the same resource name then there is greater possibility for an application to switch between widgets of different types.

Private Header File

The private header file contains the complete declaration of the class and instance structures for the widget and any additional private data that will be required by anticipated subclasses of the widget. Information in the private header file is normally hidden from the application and is designed to be accessed only through other public procedures; e.g. XtSetValues .

The contents of the Template private header file, < X11/Xaw/TemplateP.h >, are:

/* Copyright (c) X Consortium 1987, 1988
 */

#ifndef _TemplateP_h
#define _TemplateP_h

#include <X11/Xaw/Template.h>
/* include superclass private header file */
#include <X11/CoreP.h>

/* define unique representation types not found in <X11/StringDefs.h> */

#define XtRTemplateResource "TemplateResource"

typedef struct {
	int empty;
} TemplateClassPart;

typedef struct _TemplateClassRec {
	CoreClassPart	core_class;
	TemplateClassPart	template_class;
} TemplateClassRec;

extern TemplateClassRec templateClassRec;

typedef struct {
	/* resources */
	char* resource;
	/* private state */
} TemplatePart;

typedef struct _TemplateRec {
	CorePart	core;
	TemplatePart	template;
} TemplateRec;

#endif /* _TemplateP_h */

The private header file includes the private header file of its superclass, thereby exposing the entire internal structure of the widget. It may not always be advantageous to do this; your own project development style will dictate the appropriate level of detail to expose in each module.

The "WindowWidget" needs to declare two fields in its instance structure to hold the drawing colors, a resource field for the font and a field for the expose and user input callback lists:

typedef struct {
	/* resources */
	Pixel color_1;
	Pixel color_2;
	XFontStruct* font;
	XtCallbackList expose_callback;
	XtCallbackList input_callback;
	/* private state */
	/* (none) */
} WindowPart;

Widget Source File

The source code file implements the widget class itself. The unique part of this file is the declaration and initialization of the widget class record structure and the declaration of all resources and action routines added by the widget class.

The contents of the Template implementation file, < X11/Xaw/Template.c >, are:

/* Copyright (c) X Consortium 1987, 1988
 */

#include <X11/IntrinsicP.h>
#include <X11/StringDefs.h>
#include "TemplateP.h"

static XtResource resources[] = {
#define offset(field) XtOffsetOf(TemplateRec, template.field)
	/* {name, class, type, size, offset, default_type, default_addr}, */
    { XtNtemplateResource, XtCTemplateResource, XtRTemplateResource,
	  sizeof(char*), offset(resource), XtRString, (XtPointer) "default" },
#undef offset
};

static void TemplateAction(/* Widget, XEvent*, String*, Cardinal* */);

static XtActionsRec actions[] =
{
	/* {name,	procedure}, */
	{"template",	TemplateAction},
};

static char translations[] =
"	<Key>:	template(\|) \\n\\
";

TemplateClassRec templateClassRec = {
  { /* core fields */
	/* superclass	*/	(WidgetClass) &widgetClassRec,
	/* class_name	*/	"Template",
	/* widget_size	*/	sizeof(TemplateRec),
	/* class_initialize	*/	NULL,
	/* class_part_initialize	*/	NULL,
	/* class_inited	*/	FALSE,
	/* initialize	*/	NULL,
	/* initialize_hook	*/	NULL,
	/* realize	*/	XtInheritRealize,
	/* actions	*/	actions,
	/* num_actions	*/	XtNumber(actions),
	/* resources	*/	resources,
	/* num_resources	*/	XtNumber(resources),
	/* xrm_class	*/	NULLQUARK,
	/* compress_motion	*/	TRUE,
	/* compress_exposure	*/	TRUE,
	/* compress_enterleave */	TRUE,
	/* visible_interest	*/	FALSE,
	/* destroy	*/	NULL,
	/* resize	*/	NULL,
	/* expose	*/	NULL,
	/* set_values	*/	NULL,
	/* set_values_hook	*/	NULL,
	/* set_values_almost	*/	XtInheritSetValuesAlmost,
	/* get_values_hook	*/	NULL,
	/* accept_focus	*/	NULL,
	/* version	*/	XtVersion,
	/* callback_private	*/	NULL,
	/* tm_table	*/	translations,
	/* query_geometry	*/	XtInheritQueryGeometry,
	/* display_accelerator	*/	XtInheritDisplayAccelerator,
	/* extension	*/	NULL
  },
  { /* template fields */
	/* empty	*/	0
  }
};

WidgetClass templateWidgetClass = (WidgetClass)&templateClassRec;

The resource list for the "WindowWidget" might look like the following:

static XtResource resources[] = {
#define offset(field) XtOffsetOf(WindowWidgetRec, window.field)
	/* {name, class, type, size, offset, default_type, default_addr}, */
	{ XtNdrawingColor1, XtCColor, XtRPixel, sizeof(Pixel),
		  offset(color_1), XtRString, XtDefaultForeground },
	{ XtNdrawingColor2, XtCColor, XtRPixel, sizeof(Pixel),
		  offset(color_2), XtRString, XtDefaultForeground },
	{ XtNfont, XtCFont, XtRFontStruct, sizeof(XFontStruct*),
		  offset(font), XtRString, XtDefaultFont },
	{ XtNexposeCallback, XtCCallback, XtRCallback, sizeof(XtCallbackList),
		  offset(expose_callback), XtRCallback, NULL },
	{ XtNcallback, XtCCallback, XtRCallback, sizeof(XtCallbackList),
		  offset(input_callback), XtRCallback, NULL },
#undef offset
};

The user input callback will be implemented by an action procedure which passes the event pointer as call_data. The action procedure is declared as:

/* ARGSUSED */
static void InputAction(w, event, params, num_params)
	Widget w;
	XEvent *event;
	String *params;		/* unused */
	Cardinal *num_params;	/* unused */
{
	XtCallCallbacks(w, XtNcallback, (XtPointer)event);
}

static XtActionsRec actions[] =
{
	/* {name,	procedure}, */
	{"input",	InputAction},
};

and the default input binding will be to execute the input callbacks on KeyPress and ButtonPress :

static char translations[] =
"	<Key>:	input(\|) \\n\\
 	<BtnDown>:	input(\|) \\
";

In the class record declaration and initialization, the only field that is different from the Template is the expose procedure:

/* ARGSUSED */
static void Redisplay(w, event, region)
	Widget w;
	XEvent *event;	/* unused */
	Region region;
{
	XtCallCallbacks(w, XtNexposeCallback, (XtPointer)region);
}

WindowClassRec windowClassRec = {

	...

	/* expose	*/	Redisplay,

The "WindowWidget" will also declare three public procedures to return the drawing colors and the font id, saving the application the effort of constructing an argument list for a call to XtGetValues :

Pixel WindowColor1(w)
        Widget w;
{
        return ((WindowWidget)w)->window.color_1;
}

Pixel WindowColor2(w)
        Widget w;
{
        return ((WindowWidget)w)->window.color_2;
}

Font WindowFont(w)
        Widget w;
{
        return ((WindowWidget)w)->window.font->fid;
}

The "WindowWidget" is now complete. The application can retrieve the two drawing colors from the widget instance by calling either XtGetValues , or the WindowColor functions. The actual window created for the "WindowWidget" is available by calling the XtWindow function.

Chapter 8. Acknowledgments

Many thanks go to Ralph Swick (Project Athena / Digital) who has contributed much time and effort to this widget set. Previous versions of the widget set are largely due to his time and effort. Many of the improvements that I have been able to make are because he provided a solid foundation to build upon. While much of the effort has been Ralph's, many other people have contributed to the code.

Mark Ackerman (formerly Project Athena)
Donna Converse (MIT X Consortium)
Jim Fulton (formerly MIT X Consortium)
Loretta Guarino-Reid (Digital WSL)
Charles Haynes (Digital WSL)
Rich Hyde (Digital WSL)
Mary Larson (Digital UEG)
Joel McCormack (Digital WSL)
Ron Newman (formerly Project Athena)
Jeanne Rich (Digital WSL)
Terry Weissman (formerly Digital WSL)

While not much remains of the X10 toolkit, many of the ideas for this widget set come from that original version. The design and implementation of the X10 toolkit were done by:

Mike Gancarz (formerly Digital UEG)
Charles Haynes (Digital WSL)
Phil Karlton (formerly Digital WSL)
Kathleen Langone (Digital UEG)
Mary Larson (Digital UEG)
Ram Rao (Digital UEG)
Smokey Wallace (formerly Digital WSL)
Terry Weissman (formerly Digital WSL)

I have used the formatting ideas, and some of the words from previous versions of this document. The X11R3 Athena widget document was written by:

Ralph R. Swick (Project Athena/ Digital)
Terry Weissman (formerly Digital WSL)
Al Mento (Digital UEG)

Putting this manual together was a major task in and of itself. I would like to thank Ralph Swick, Donna Converse, and Jim Fulton for taking the time to help convert my technical knowledge into legible text. A special thanks to Jean Diaz (O'Reilly and Associates) for spending nearly a month with me working out all the annoying little details.

Chris D. Peterson
MIT X Consortium 1989

The R5 edition of this document has been edited by the research staff of the MIT X Consortium, with significant contributions by Jim Fulton (NCD).

Donna Converse
MIT X Consortium 1991

The R6 edition of this document has been edited to reflect changes brought about by research staff of the Omron Corporation, with special recognition to Li Yuhong, Seiji Kuwari, and Hiroshi Kuribayashi for the X11R5/contrib/lib/Xaw internationalization that inspired this version.

Frank Sheeran
Omron Corporation 1994