The radeonhd driver, or xf86-video-radeonhd, is an X.org video driver for codenamed R500-R700 graphics devices. It was developed by the X11 community, mostly centered around Novell and AMD, with the free documentation provided by AMD.
The driver supports full modesetting (read: any mode is usable, not only those provided by the BIOS), and is compatible to RandR 1.3. 2D and Xv (video) acceleration is provided for all supported GPUs; 3D acceleration via Mesa is supported for r5xx/rs690 GPUs (X1xxx) and is in progress for r6xx/r7xx GPUs (HD2xxx-HD4xxx).
Status 09/2010: Linux distributions, including Novell's openSUSE, have now abandoned radeonhd as the default driver, instead using the radeon driver. radeon has more features, including Kernel Mode-Setting support and more 3D support, and it supports all Radeon generation from original R100 Radeons to R800 Radeons (HD 5000 series). Radeonhd can be continued to be updated as long as there are people find it useful.
- radeonhd packages for your distribution
- how to install from latest git
- how to setup 2D acceleration for r6xx/r7xx
- how to setup DRI
- how to setup 3D for r6xx/r7xx (experimental)
- r600 demo: experimental 3D engine bringup tool
- [[rxx Errata Sheet and explanations of difficult GPU subsystems|radeonhd:r6xxErrata]]
- list of things to do
- feature list
- Added support for RV740, M92, M93, M97.
- Added support for HDMI audio on RS690 and R700.
- Added support for power management.
- Implemented almost correct analysis of AtomBIOS tables.
- 2D acceleration (EXA) is enabled by default now, except on RV740.
- Backlight handling finally fixed - compatible with xbacklight 1.1.1.
- Overhaul of memory controller setup. Fixes many "MC not idle" issues.
- Overhaul of cursor handling. Fixes most cursor bugs.
- Selectable color space for XVideo on R6xx/R7xx.
- Tons of bug fixes (DDC, EXA, LUT, RandR, AtomBIOS).
- More quirk table entries.
- Shave support (cleaner compilation output).
- All warnings fixed.
Some start of Developer's documentation in README.coding. Version 1.2.5
Added 2D acceleration for R6xx and R7xx (disabled by default).
- Added XVideo support for R6xx and R7xx (disabled by default).
- Added support for RS880 and RV790.
- Added RandR 1.3 mandatory properties.
- Refactoring of MC code.
- Enable DRI support by default on R5xx and RS6xx.
- LUT (color lookup table) fixes.
- Tons of quirk table entries and bug fixes.
Fix register accesses for processors that reorder memory writes. Version 1.2.4
Added HDMI support.
- Added support for RV710, RV730 (DCE 3.2).
- Added screen rotation support.
- Added RandR 1.3 panning support.
Many acceleration and build fixes. Version 1.2.3
Added Command Submission infrastructure. Version 1.2.2
Added DRI support (R5xx and RS6xx).
- Added support for RV770, RS780, M82, M86, and M88.
- Added XVideo support.
- Added CP based 2D acceleration (R5xx and RS6xx).
- Added EXA render acceleration (R5xx and RS6xx).
- Added support for AtomBIOS based mode setting.
- Added support for scaled modes.
- Added RandR support for backlight control.
Lots of modesetting related bug fixes. Version 1.2.1
Build-fixes for systems without -DNDEBUG, and for rhd_dump
Added two new RV670 devices. Version 1.2.0
Added support for RV620, RV635, and R680.
- Added 2D acceleration for R5xx (including RS6xx), both XAA and EXA.
- Added support for DDIA block (second digital output) on RS690.
- Added support for interlaced modes
- Added additional layers for splitting outputs into encoders and transmitters as needed for new hardware.
- Added support for BSD.
- Improved RandR corner cases.
- Improved handling of secondary cards.
- Implemented foundation work for future TV support.
- Huge number of bugfixes and minor updates.
The radeonhd driver supports video cards based on
- R500 style hardware: R5xx, RV5xx, RS6xx, RS740, M52 and up
- R600 style hardware: R6xx, RV6xx, RS780, M64 and up
- R700 style hardware: RV7xx Note that this simple classification of the chipsets isn't exactly correct, because often the individual components are of different generations, especially on mobility chipsets.
See supported chipsets in radeonhd git HEAD for up to date detail information.
Development of the driver is driven by the community, with several of the developers funded by Novell and AMD. If you want to contribute to this project, join the mailing list, and have a look at the list of things to do and the open bugzilla entries.
You do not necessarily have to be a coder to help, there is documentation to be done, users to be helped, you name it. That said, the radeonhd driver project is - as almost all open software development projects - understaffed and likes to welcome any contributions.
The mailing list for the radeonhd driver is firstname.lastname@example.org , you can subscribe to this mailing list by sending a mail to email@example.com. More information on this mailing list at http://lists.opensuse.org/radeonhd/.
Overview of recent updates to radeonhd: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd.
There is also an IRC channel #radeonhd on freenode.net. IRC logs at phoronix' radeonhd.org.
The radeonhd:packages page lists your source for dep, rpm, etc. packages.
For an alternative X.org driver see radeon. In addition r500-r700, it also supports older Radeons and is developed by partially different people. It is currently the default X.org driver. Both radeon and radeonhd have an overlapping feature set, and both should support all r500-r700 cards. If either does not work for you, try the other one. Co-operation is happening in both directions. More information about various available drivers for r500-r700 on the radeon page, section ”What about other drivers?”.
Released radeonhd tarballs can be downloaded from ftp://ftp.freedesktop.org/pub/individual/driver/
The name of the tarball will be xf86-video-radeonhd-
The developer version of radeonhd is maintained in the git repository found at git://anongit.freedesktop.org/git/xorg/driver/xf86-video-radeonhd
You can find information on using git at the git website http://git.or.cz/ and a short intro at http://www.freedesktop.org/wiki/Infrastructure/git/Developers
You can get a copy of the repository like this:
$ git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-video-radeonhd
This will create a directory xf86-video-radeonhd in the current directory by default, or the given directory my-radeonhd otherwise.
If you have not made any local changes and want to update you source code with the newest stuff from the official radeonhd repository, you can run this:
$ git pull
If you HAVE made local changes and committed them locally to your master branch (with
git commit -a), you will be better off running
$ git fetch $ git rebase origin
If you're using more branches, read the git docs.
Note: The following assumes that you checked out the latest git version of radeonhd. If you're using a released version in form of a tarball, exchange autogen.sh with configure. Also make sure you have the necessary development files for X11 driver compilation (e.g. xorg-x11-server-sdk in openSUSE).
With X.Org 7.0 and later:
$ ./autogen.sh $ make
Then as root:
# make install
This will litter all kinds of compiled files throughout your source tree.
* Please note: *
make install will usually install to
/usr/local. On Linux X is usually installed in
/usr. To change this, you need to add the argument
--prefix /usr to
./autogen.sh --prefix /usr. Depending on which system you use you might have to specify a libdir if you are on a 64bit system. Check if the directory
/usr/lib64 exists on your system. If it does, please use
./autogen.sh --prefix /usr --libdir /usr/lib64.
With X.Org prior to 7.0:
$ xmkmf -a $ make EXTRA_INCLUDES="-I/usr/include/xorg -I/usr/include/drm" all
and as root:
$ make install
This uses imake and is for compatibility with older systems.
To avoid building in your source tree, do:
$ mkdir _b && cd _b $ ../autogen.sh $ make $ make install
Runs the build in _b/ - and if something is completely messed up, you can safely remove the _b/ directory and create a new one without affecting any source files.
Hint: If you happen to have multiple branches in your git source tree, you
* can have per-branch __b-BRANCH/_ build trees and __i-BRANCH/_ install trees. ("... configure ... --prefix=$PWD/_i-BRANCH")
Note that none of these methods will install the rhd_conntest tool. The "xmkmf" method always requires a separate "make" run in utils/conntest. The other two will build rhd_conntest by default if its requirements are met.
Please note you need updated drm kernel modules and proper configuration (xorg.conf) for 2D and Xv on R6xx/R7xx.
The following subsystems have not been implemented yet or show some limitations:
- 3D acceleration is active by default only on R5xx and RS6xx right now. Experimental support for R6xx and R7xx is available, but not for the faint of heart. Also, there is an experimental 3D bringup tool for testing on 6xx/7xx.
- 2D acceleration is active by default now, except on RV740.
- No TV and Component connector support so far.
- Suspend & Resume isn't completely tested, but works on a variety of hardware. Your mileage may vary. Note that typically you need some BIOS workarounds on the kernel command line, ask your distribution for that.
- Powermanagement has to be enabled explicitely. Depending on your hardware, the fan might run at full speed. This turned out to be really tricky. See also RadeonFeature and RadeonProgram for a features and supported 3D program lists.
The following known bugs have not been resolved yet (ordered by severity):
- Digital output on PCIEPHY (RS780) doesn't light up unless connected at boot time. Affects mostly displays connected to laptops thru DVI/HDMI. It is a problem with the AtomBIOS byte code parser which is used at the moment. The only work around is to boot with this output connected at boot time.
- Bug 14500: External monitor does not display native resolution
- Some cards seem to provide broken connector tables. We're constantly fixing those. Please report if you have one.
When reporting an error with bugzilla, please be sure to attach your
Xorg.0.log. Please use
-logverbose 7 for the Xserver in this case. If the error is related to RandR, please verify the xrandr version you are using, and attach the output of
xrandr -q; xrandr -q --verbose.
If you want to report a crash try to get a decent stack backtrace (
bt full) in gdb. You have to compile with debugging information (
-O0 -g3) or install -debuginfo packages for that. If a -debuginfo package for the Xserver is available for your distribution, please install it as well. It does not have any negative side effects apart from using space on your harddisk.
If you don't get any output on your monitors at all, please add
Option "NoRandR" to the "Device" section in your
xorg.conf, and verify whether this issue is related to RandR or to general modesetting.
The following messages are absolutely normal in your Xorg.0.log (as we don't have 3D acceleration yet):
(EE) AIGLX error: dlopen of /usr/lib/dri/r600_dri.so failed (EE) AIGLX: reverting to software rendering
If you stumble over a regression and the source of the issue cannot be determined easily, you may have to git-bisect the issue. This helps us identifying the commit that introduced the issue. As you have to compile the driver yourself in this process, make sure you have the necessary development files (e.g. xorg-x11-server-sdk in openSUSE). Seefor more tips about compiling the driver.
First get a copy of the repository if you don't have that already:
$ git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-video-radeonhd
Otherwise make sure that the copy you have is recent (if you can already reproduce the regression with your current state, you should NOT do that):
$ git pull
Identify the last known good version (e.g. the last released version), and the first known broken version. The
gitk command can help you by visualizing the history. You need to know the SHA1-ids (alternatively, known names as 1.2.4 or master).
Start a new git-bisect session:
$ git bisect start [bad] [good]
E.g. if you just noted that with the current git master changing the backlight level is no longer working, while it was working with 1.2.5, do "
git bisect master 1.2.5". If you remember that you tested git commit bc42c63 and it still worked, you can save some time by "
git bisect master bc42c63".
You will have to do the following in a loop until git tells you that you are done:
- git presentes you a commit to try out. So configure and make:
$ ./autogen.sh && make && sudo make install
- If this worked out, test the driver. This depends on what exactly you are trying to verify. E.g. for the theoretical backlight issue restart the Xserver (so the new driver is loaded) and test, whether you can change the backlight level. Caveat: Depending on what you need to test this can be arbitrarily complex. E.g. when debugging memory controller setup you just have to to reboot before testing. Every time.
- If the checked out version runs fine, do:
$ git bisect good
- If the checked out version is broken, do:
$ git bisect bad
- You will get a new commit to try out. At the end git will present you a single commit that first exhibits the broken behavior. This git commit number is the important information for the regression you analyzed.
See also examples below for a complete setup.
You've probably pulled in some new source files when you updated your sources from git. In this case you should do:
$ make distclean $ ./autogen.sh $ make
Sometimes in such cases the build doesn't break in such cases but the driver crashes apparently for new reason. Before reporting an error, please try if those steps above make things work already.
If during running autogen.sh / configure you get
autoreconf: running: /usr/bin/autoconf configure.ac:35: error: possibly undefined macro: XORG_DRIVER_CHECK_EXT If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /usr/bin/autoconf failed with exit status: 1
your system lacks one or more of these files:
/usr/share/aclocal/xorg-macros.m4 /usr/share/aclocal/xorg-server.m4 /usr/share/aclocal/xorgversion.m4
Make sure you have all required X.org development packages installed. These may be called xorg-dev, xorg-x11-server-sdk and xorg-x11-util-macros, or something similar.
Please read how to setup DRI support.
You probably used the
fglrx driver before. It doesn't restore the linebuffer completely on exit. You have to reboot your system to get this fixed. In some rare cases you might even have to power it off and restart it. Suspend to disk & resume is reported to work on many systems as well.
On R5xx hardware the description of the hot plug detection (HPD) pins in the AtomBIOS connector table is often broken. Please try using
Option "HPD" "swap"
in the "Device" section. If this helps, please test all outputs (as far as possible with your equipment), and report your findings to the mailing list. Reports should include your Xorg.0.log (the working version) and your results regarding testing.
If this doesn't help, please try:
Option "HPD" "off"
This disables HPD detection completely. In some cases the HPD pin of the GPU doesn't seem to be connected to the DVI connector although it is advertised in the BIOS.
NOTE: Option "HPD" should always only be a workaround until the quirks table in the driver has been updated. ALWAYS report if it is needed to get your monitor running.
If you are using a KVM switch for your analog monitor and this monitor isn't detected correctly please try without the KVM switch. Analog displays are detected thru 'load detection' ie detection of the terminating resistors on the monitor side. The VGA standard requires 75 Ohm resistors on the RGB lines. Some KVM switches seem to not meet these requirements.
Right. This is standard with RandR. Now the monitor sections have to specified with
Option "monitor-<output_name>" "<monitor_name>"
in the "Device" section. You can get all output names of your card with
xrandr -q. See also example below.
Behavior of monitor sections is different to standard modesetting in radeonhd. With standard modesetting a monitor section replaces the EDID detected monitor (thus typically reducing the maximum mode size to 1024x768), in RandR it doesn't. It's not exactly clear in which cases which parameters are overridden by the monitor section and how to override EDID detected parameters and modes in the RandR case.
Some machines with M72, M83, and possibly other IGP chipsets (especially laptops) with more than 2GB of memory exhibit this BIOS issue. Apparently, the MTRR table is not setup correctly. One possibility is to reduce the amount of RAM, the more reasonable (but only little tested so far) alternative is to enable the MTRR sanitizer in the kernel.
grep "CONFIG_MTRR" /boot/config*
to check whether CONFIG_MTRR is active for your kernel. If it is, boot with
, otherwise you have to recompile your kernel with this option enabled.
xrandr --output <output_name> --right-of <other_output_name>
If this fails, the most common reason is the following: The X.org framebuffer cannot be resized after initialization (yet). You have to either configure this statically (see below), or specify the maximum needed size with
Virtual <width> <height>
in the "Display" subsection of the "Screen" section.
If xrandr is not able to unclone displays (monitors show the same screen still), and you have set virtual correctly, it can also be that you need a newer xrandr (1.2.3 or git), and potentially also a newer xserver. You can try to explicitly set the used Crtc with
--crtc 1 or 0.
xrandr -q prints the maximum frame buffer size in the first line of its output.
Add (mostly empty) monitor sections for your monitors like described in the answer above. Then add
Option "RightOf" "<other_monitor_name>"
to the monitor section representing your right monitor. Alternatively, you can use
LeftOf - working correctly only with the latest Xserver (bugfix). Of course there's also
You can also use
<other_output_name> instead of
<other_monitor_name>. Also read
man 5 xorg.conf.
This seems to be a general RandR issue. Can be changed with
--output <output> --auto during runtime, or with
Option "PreferredMode" "<mode>" with newer Xservers (known to be buggy up to Xserver 1.4.0).
Add your preferred monitor to
Option "RROutputOrder" "<monitor_name>"
in the "Device" section. This reorders the RandR outputs, which is reflected in the Xinerama screen order. You can specify any number of outputs, separated by spaces or comas. Note that this is a radeonhd specific option, it won't work with other drivers.
Make sure you have enabled xinerama support for your window manager. For instance, on Gentoo enable the xinerama USE-flag and rebuild the affected packages by issuing the following command
emerge -aND world
Get a newer xrandr (1.2.3 or git), and potentially also a newer xserver. If it still happens, send a mail to firstname.lastname@example.org or file a bug at freedesktop.org. You can get the newest xrandr from git by
There is a display manager configuration file which lists the command line to use when starting the Xserver. It usually
/etc/X11/xdm/Xservers. In this file you will find a line like:
:0 local /usr/bin/X -nolisten tcp -br vt7
-logverbose 7 at the end of this line.
There may be an old, obsolete line in your
xorg.conf file from some fglrx setup a long time ago:
Option "mtrr" "no" # ancient, obsolete option: REMOVE IT!
If you have such a line, removing it can speed up radeonhd considerably.
General note: As a rule, one does not need any
xorg.conf file with Xserver 1.4 and up, so it is always a good idea to make sure you really need all the statements in there.
Make sure you have a config file with one Device section for each card. Each device section should be referenced from it's own Screen section which itself should be referenced in the Layout section.
Depending on which version of the Xserver and OS you are using you may need to take additional steps. On Linux you may need to do:
- On Linux you need to boot with the boot option pci=rom.
- after booting do:
# echo 1 > /sys/bus/pci/devices/<pci_bus_id>/rom
- Some users have reported they also need to do:
# setpci -s <pci_bus_id> ROM_ADDRESS=xxxx0001 # setpci -s <pci_bus_id> COMMAND=2replace
with the PCI bus ID and xxxx with the hex digits you can obtain thru
Example xorg.conf (minimal for Xserver 1.3 and up), e.g. no input devices or modes configured, monitors configured by EDID data):
Section "Monitor" Identifier "External" Option "RightOf" "Panel" EndSection Section "Monitor" Identifier "Panel" EndSection Section "Device" Identifier "MyCard" Driver "radeonhd" Option "monitor-VGA_1" "External" Option "monitor-PANEL" "Panel" Option "RROutputOrder" "PANEL" EndSection Section "Screen" Identifier "MyScreen" Device "MyCard" DefaultDepth 24 SubSection "Display" Depth 24 ## This is superfluous and actually harmful with a ## static configuration. Enable for dynamic config only. #Virtual 2704 1050 EndSubSection EndSection
Example call to configure multiple screens dynamically (set Virtual in
xorg.conf for that to work):
xrandr --output VGA_1 --right-of PANEL
This is a list of abbreviations and words which you will stumble upon when you are digging deeper.